|
3 Blade stainless propeller for Mercury 90+ horsepower outboard engines, select Mercruiser stern drive engines and Honda/Nissan/Tohatsu 115-250 horsepower engines. All with 15 tooth spline and thru hub exhaust. 4-3/4" gear case.
|
496.99 |
|
|
SpeedZone Max3 - Right Hand - Stainless Steel Propeller - 3-Blade - 14.8" x 23 Pitch
Introducing Turning Point Propellers SpeedZone Max3® high-performance 3-blade stainless steel bass boat propeller series. Extensive testing has shown improved performance against the best competitive brands in the market, making it One Furious Propeller™ for maximizing bass boat performance.
Features:
OAS octagon vents optimize aeration and low-end RPM.
The exhaust escapes out of the open vent hole for faster planning times.
5 OAS options per vent hole (open, L, M, S, & closed).
[L] & [Closed] are included with SpeedZone Max3 propellers.
Compatible with Mercury® props using the PVS® System
Maximizes:
Maximizing SPEED: Higher top-end, get to that fishing spot faster.
Maximizing LIFT: More boat lifts to help carry all gear and tech mounted up front.
Maximizing HANDLING: Faster and safer turns with easier steering.
Maximizing DURABILITY: Tournaments last longer with stronger blade sections.
Maximizing ACCELERATION: Optimized Acceleration System™, for faster planning.
MAXIMIZE the time fishing!
Applications:
SpeedZone Max3 for 150-300+hp outboards with 4.75-5.44” gearcases [Installation/Hub Kit Required]
|
507.88 |
|
|
SpeedZone Max3 - Right Hand - Stainless Steel Propeller - 3-Blade - 14.8" x 24 Pitch
Introducing Turning Point Propellers SpeedZone Max3® high-performance 3-blade stainless steel bass boat propeller series. Extensive testing has shown improved performance against the best competitive brands in the market, making it One Furious Propeller™ for maximizing bass boat performance.
Features:
OAS octagon vents optimize aeration and low-end RPM.
The exhaust escapes out of the open vent hole for faster planning times.
5 OAS options per vent hole (open, L, M, S, & closed).
[L] & [Closed] are included with SpeedZone Max3 propellers.
Compatible with Mercury® props using the PVS® System
Maximizes:
Maximizing SPEED: Higher top-end, get to that fishing spot faster.
Maximizing LIFT: More boat lifts to help carry all gear and tech mounted up front.
Maximizing HANDLING: Faster and safer turns with easier steering.
Maximizing DURABILITY: Tournaments last longer with stronger blade sections.
Maximizing ACCELERATION: Optimized Acceleration System™, for faster planning.
MAXIMIZE the time fishing!
Applications:
SpeedZone Max3 for 150-300+hp outboards with 4.75-5.44” gearcases [Installation/Hub Kit Required]
|
507.88 |
|
|
SpeedZone Max3 - Right Hand - Stainless Steel Propeller - 3-Blade - 14.8" x 25 Pitch
Introducing Turning Point Propellers SpeedZone Max3® high-performance 3-blade stainless steel bass boat propeller series. Extensive testing has shown improved performance against the best competitive brands in the market, making it One Furious Propeller™ for maximizing bass boat performance.
Features:
OAS octagon vents optimize aeration and low-end RPM.
The exhaust escapes out of the open vent hole for faster planning times.
5 OAS options per vent hole (open, L, M, S, & closed).
[L] & [Closed] are included with SpeedZone Max3 propellers.
Compatible with Mercury® props using the PVS® System
Maximizes:
Maximizing SPEED: Higher top-end, get to that fishing spot faster.
Maximizing LIFT: More boat lifts to help carry all gear and tech mounted up front.
Maximizing HANDLING: Faster and safer turns with easier steering.
Maximizing DURABILITY: Tournaments last longer with stronger blade sections.
Maximizing ACCELERATION: Optimized Acceleration System™, for faster planning.
MAXIMIZE the time fishing!
Applications:
SpeedZone Max3 for 150-300+hp outboards with 4.75-5.44” gearcases [Installation/Hub Kit Required]
|
507.88 |
|
|
3 Blade high performance aluminum interchangeable hub propeller for 115 and up horsepower engines with thru hub exhaust, 4-3/4" gear case. Category E prop. Requires RBX™ hub kit for installation.
|
115.99 |
|
|
3 Blade stainless interchangeable hub propeller for 115 and up horsepower engines with thru hub exhaust, 4-3/4" gear case. Category E prop. Requires RBX™ hub kit for installation.
|
435.99 |
|
|
3 Blade stainless interchangeable hub propeller for 115 and up horsepower engines with thru hub exhaust, 4-3/4" gear case. Category E prop. Requires RBX™ hub kit for installation.
|
435.99 |
|
|
3 Blade stainless propeller for 150-300 horsepower engines with 15 tooth spline and thru hub exhaust. 4-3/4" Gear Case.
|
496.99 |
|
|
Yamaha fuel line assembly. Low permeation gasoline and solvent-resistant construction with stainless steel clamps and fittings. O-ring construction on all fittings for tight, leak-free connections. Primer bulb features dual internal check valves to ensure rapid prime and prevent back flow. 3/8" hose, 18-1/2" length on tank end, 55-1/2" length on motor end. Clamshell packaged.
|
69.99 |
|
|
Teak Louvered Insert
Height:9-3/8"
Width:18"
Depth:3/4"
Cut Out
Height:8-3/8"
Width:17"
Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.
All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension
|
52.09 |
|
|
WakeSurf Edge Pro II Mega Wake Shaper - 14" x 18"
FATSAC's huge water displacement wing for maximum wave height!
Recommended boat 21’ or longer, have a 325hp engine or greater, use with FATSAC water ballast systems. Level load your boat to keep the nose down for the captain’s visibility and a long wake.
Features:
Patented Concave Water Channeling Wing - Our concave channeling wing surface pushes more water to increase the length of the wave while keeping the face super clean!
Super Strong Suction Cup Attachment - Our 4.5-inch rubber suction cups won’t damage the gel coat or leave black markings on your boat. Easy to adjust on the fly, No ugly Velcro or safety tethers are required.
Durable Rust-Free Materials - We Build the WakeSurf Edge with impact-resistant, lite weight glass-filled nylon 6.6. and rust-free stainless steel hardware. Our shaper is long-lasting; won’t rust or stain your boat.
Built-In Flotation - Don’t worry about your wake-shaping investment sinking to the bottom. The Wakesurf Edge wing is rotomolded and sealed airtight.
|
221.99 |
|
|
XKA Stainless Steel Trim Tab - 9 x 18
The Lectrotab stainless steel trim tab design provides unmatched strength and reliability. All stainless steel tabs are fabricated with a continuous rolled and pinned hinge. This design eliminates the need for welding.
Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat.
Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates either a standard or low profile transom mounting bracket.
*Control switch not included
Features:
Continuous rolled and pinned hinge provides added strength and eliminates the need for welding
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
Actuators are fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Trim Tab Size (L x W) - 9" x 18" (23 x 46 cm)
Boat Length - 21' to 30' (6.5 to 9 M)
Trim Tab Material - 12 gauge, 304 Stainless Steel
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
In the Box:
Two (2) Stainless Steel tabs
Two (2) actuators w/23' (7 M) cables
Instruction Manual
*Sold as an Individual
|
927.83 |
|
|
XKA Stainless Steel Trim Tab - 12 x 18
The Lectrotab stainless steel trim tab design provides unmatched strength and reliability. All stainless steel tabs are fabricated with a continuous rolled and pinned hinge. This design eliminates the need for welding.
Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat.
Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates either a standard or low profile transom mounting bracket.
*Control switch not included
Features:
Continuous rolled and pinned hinge provides added strength and eliminates the need for welding
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
Actuators are fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Trim Tab Size (L x W) - 12" x 18" (30 x 46 cm)
Boat Length - 20' to 40' (6 to 12 M)
Trim Tab Material - 12 gauge, 304 Stainless Steel
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
In the Box:
Two (2) Stainless Steel tabs
Two (2) actuators w/23' (7 M) cables
Instruction Manual
*Sold as an Individual
|
936.06 |
|
|
XKA Stainless Steel Trim Tab Kit w/Rocker Switch - 9 x 18
The Lectrotab stainless steel trim tab design provides unmatched strength and reliability. All stainless steel tabs are fabricated with a continuous rolled and pinned hinge. This design eliminates the need for welding.
Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat.
Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates either a standard or low profile transom mounting bracket.
Lectrotab's new flat rocker switch has improved sealing to prevent water entry and recessed rocker to prevent breaking. Specially designed to provide and "instant stop" circuit when the switches are released, thus preventing actuator over-run.
Features:
Continuous rolled and pinned hinge provides added strength and eliminates the need for welding
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
Actuators are fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Trim Tab Size (L x W) - 9" x 18" (23 x 46 cm)
Boat Length - 21' to 30' (6.5 to 9 M)
Trim Tab Material - 12 gauge, 304 Stainless Steel
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
Rocker Switch Dimensions (W x H) - 3.125" x 3.25" (79.4 x 82.5 mm)
Rocker Switch Mounting Hole Cutout (H x W) - 2.25" x 2" (57.5 x 50 mm)
Rocker Switch Operating Voltage - 12 or 24 V
In the Box:
One (1) Flat Rocker Switch
Two (2) Stainless Steel tabs
Two (2) actuators w/23' (7 M) cables
Instruction Manual
*Sold as a Kit
|
1030.84 |
|
|
XKA Stainless Steel Trim Tab Kit with Rocker Switch - 12 x 18
The Lectrotab stainless steel trim tab design provides unmatched strength and reliability. All stainless steel tabs are fabricated with a continuous rolled and pinned hinge. This design eliminates the need for welding.
Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat.
Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates either a standard or low profile transom mounting bracket.
Lectrotab's new flat rocker switch has improved sealing to prevent water entry and recessed rocker to prevent breaking. Specially designed to provide and "instant stop" circuit when the switches are released, thus preventing actuator over-run.
Features:
Continuous rolled and pinned hinge provides added strength and eliminates the need for welding
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
Actuators are fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Trim Tab Size (L x W) - 12" x 18" (30 x 46 cm)
Boat Length - 20' to 40' (6 to 12 M)
Trim Tab Material - 12 gauge, 304 Stainless Steel
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
Rocker Switch Dimensions (W x H) - 3.125" x 3.25" (79.4 x 82.5 mm)
Rocker Switch Mounting Hole Cutout (H x W) - 2.25" x 2" (57.5 x 50 mm)
Rocker Switch Operating Voltage - 12 or 24 V
In the Box:
One (1) Flat Rocker Switch
Two (2) Stainless Steel tabs
Two (2) actuators w/23' (7 M) cables
Instruction Manual
*Sold as a Kit
|
1039.07 |
|