|
3 Blade high performance aluminum interchangeable hub propeller for 115 and up horsepower engines with thru hub exhaust, 4-3/4" gear case. Category E prop. Requires RBX™ hub kit for installation.
|
115.99 |
|
|
SpeedZone Max3 - Right Hand - Stainless Steel Propeller - 3-Blade - 14.8" x 23 Pitch
Introducing Turning Point Propellers SpeedZone Max3® high-performance 3-blade stainless steel bass boat propeller series. Extensive testing has shown improved performance against the best competitive brands in the market, making it One Furious Propeller™ for maximizing bass boat performance.
Features:
OAS octagon vents optimize aeration and low-end RPM.
The exhaust escapes out of the open vent hole for faster planning times.
5 OAS options per vent hole (open, L, M, S, & closed).
[L] & [Closed] are included with SpeedZone Max3 propellers.
Compatible with Mercury® props using the PVS® System
Maximizes:
Maximizing SPEED: Higher top-end, get to that fishing spot faster.
Maximizing LIFT: More boat lifts to help carry all gear and tech mounted up front.
Maximizing HANDLING: Faster and safer turns with easier steering.
Maximizing DURABILITY: Tournaments last longer with stronger blade sections.
Maximizing ACCELERATION: Optimized Acceleration System™, for faster planning.
MAXIMIZE the time fishing!
Applications:
SpeedZone Max3 for 150-300+hp outboards with 4.75-5.44” gearcases [Installation/Hub Kit Required]
|
507.88 |
|
|
SpeedZone Max3 - Right Hand - Stainless Steel Propeller - 3-Blade - 14.8" x 24 Pitch
Introducing Turning Point Propellers SpeedZone Max3® high-performance 3-blade stainless steel bass boat propeller series. Extensive testing has shown improved performance against the best competitive brands in the market, making it One Furious Propeller™ for maximizing bass boat performance.
Features:
OAS octagon vents optimize aeration and low-end RPM.
The exhaust escapes out of the open vent hole for faster planning times.
5 OAS options per vent hole (open, L, M, S, & closed).
[L] & [Closed] are included with SpeedZone Max3 propellers.
Compatible with Mercury® props using the PVS® System
Maximizes:
Maximizing SPEED: Higher top-end, get to that fishing spot faster.
Maximizing LIFT: More boat lifts to help carry all gear and tech mounted up front.
Maximizing HANDLING: Faster and safer turns with easier steering.
Maximizing DURABILITY: Tournaments last longer with stronger blade sections.
Maximizing ACCELERATION: Optimized Acceleration System™, for faster planning.
MAXIMIZE the time fishing!
Applications:
SpeedZone Max3 for 150-300+hp outboards with 4.75-5.44” gearcases [Installation/Hub Kit Required]
|
507.88 |
|
|
SpeedZone Max3 - Right Hand - Stainless Steel Propeller - 3-Blade - 14.8" x 25 Pitch
Introducing Turning Point Propellers SpeedZone Max3® high-performance 3-blade stainless steel bass boat propeller series. Extensive testing has shown improved performance against the best competitive brands in the market, making it One Furious Propeller™ for maximizing bass boat performance.
Features:
OAS octagon vents optimize aeration and low-end RPM.
The exhaust escapes out of the open vent hole for faster planning times.
5 OAS options per vent hole (open, L, M, S, & closed).
[L] & [Closed] are included with SpeedZone Max3 propellers.
Compatible with Mercury® props using the PVS® System
Maximizes:
Maximizing SPEED: Higher top-end, get to that fishing spot faster.
Maximizing LIFT: More boat lifts to help carry all gear and tech mounted up front.
Maximizing HANDLING: Faster and safer turns with easier steering.
Maximizing DURABILITY: Tournaments last longer with stronger blade sections.
Maximizing ACCELERATION: Optimized Acceleration System™, for faster planning.
MAXIMIZE the time fishing!
Applications:
SpeedZone Max3 for 150-300+hp outboards with 4.75-5.44” gearcases [Installation/Hub Kit Required]
|
507.88 |
|
|
3 Blade stainless interchangeable hub propeller for 115 and up horsepower engines with thru hub exhaust, 4-3/4" gear case. Category E prop. Requires RBX™ hub kit for installation.
|
435.99 |
|
|
3 Blade stainless interchangeable hub propeller for 115 and up horsepower engines with thru hub exhaust, 4-3/4" gear case. Category E prop. Requires RBX™ hub kit for installation.
|
435.99 |
|
|
3 Blade stainless propeller for Mercury 90+ horsepower outboard engines, select Mercruiser stern drive engines and Honda/Nissan/Tohatsu 115-250 horsepower engines. All with 15 tooth spline and thru hub exhaust. 4-3/4" gear case.
|
496.99 |
|
|
3 Blade stainless propeller for 150-300 horsepower engines with 15 tooth spline and thru hub exhaust. 4-3/4" Gear Case.
|
496.99 |
|
|
Yamaha fuel line assembly. Low permeation gasoline and solvent-resistant construction with stainless steel clamps and fittings. O-ring construction on all fittings for tight, leak-free connections. Primer bulb features dual internal check valves to ensure rapid prime and prevent back flow. 3/8" hose, 18-1/2" length on tank end, 55-1/2" length on motor end. Clamshell packaged.
|
69.99 |
|
|
Teak Louvered Insert
Height:9-3/8"
Width:18"
Depth:3/4"
Cut Out
Height:8-3/8"
Width:17"
Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.
All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension
|
52.09 |
|
|
9" x 18" Standard Mount Trim Tab Kit without Switch Kit- 12V
Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.
Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.
Kit Contents:
2 each of 12-gauge stainless steel trim tab blades
2 each of #15054-001 actuator with 6' leads and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
2 each of #15085-001 (116) upper mounting brackets with gland seal
2 each of #50014-001 (119) lower mounting brackets
1 each of the Lenco owner’s / installation manual
All necessary stainless steel mounting hardware
Specifications:
Suggested Boat Length: 22' to 30'
Length of Tab: 9"
Width of Tab: 18"
Hinge Height: 2"
Minimum Transom Height: 14"
Blades: 12 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
620.03 |
|
|
12" x 18" Standard Mount Trim Tab Kit without Switch Kit- 12V
Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.
Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.
Kit Contents:
2 each of 12-gauge stainless steel trim tab blades
2 each of #15054-001 actuator with 6' leads and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
2 each of #15085-001 (116) upper mounting brackets with gland seal
2 each of #50014-001 (119) lower mounting brackets
1 each of the Lenco owner’s / installation manual
All necessary stainless steel mounting hardware
Specifications:
Suggested Boat Length: 26' to 36'
Length of Tab: 12"
Width of Tab: 18"
Hinge Height: 2"
Minimum Transom Height: 14"
Blades: 12 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
660.94 |
|
|
4 Blade stainless interchangeable hub propeller for 115 and up horsepower engines with thru hub exhaust, 4-3/4" gear case. Category E prop. Requires RBX™ hub kit for installation.
|
477.99 |
|
|
4 Blade stainless propeller for Mercury 90+ horsepower outboard engines, select Mercruiser stern drive engines and Honda/Nissan/Tohatsu 115-250 horsepower engines. All with 15 tooth spline and thru hub exhaust. 4-3/4" gear case.
|
529.99 |
|
|
4 Blade stainless propeller for 150-300 horsepower engines with 15 tooth spline and thru hub exhaust. 4-3/4" Gear Case.
|
537.99 |
|