|
4 Blade stainless propeller for 90 - 300 horsepower engines with 15 tooth spline and thru hub exhaust. 4-3/4" gear case.
|
537.99 |
|
|
This unit is using a NEMA 143/145TC Framed Motor as opposed to the standard NEMA 56C
Applications
Rail cars
Tanks with an opening on top
Bulk storage to day or process tank transfer
Transfer chemicals and rinse waters from sumps
Suction Port Size:
1.5 in
Discharge Port Size:
1.5 in
Connection Types:
NPT, BSP, Flange, or Union
Maximum Specific Gravity:
up to 1.8
Maximum Working Pressure:
90 psi (6.2 bar)
@3450 RPM
@2900 RPM
Flow Range*:
5 to 120 gpm
1.14 to 25.8 m3/h
Maximum Head:
90 ft
23.3 m
Power Range**:
0.8 to 2.9 hp
0.72 to 1.86 kW
Type:
Self-Priming Sealless Mag Drive
Configuration:
Horizontal
Construction Materials:
Polypropylene or PVDF
O-ring Materials:
FKM, EPDM, Simriz®, or Kalrez®
Bushing Materials:
Carbon, PTFE, Ceramic, or SiC
Shaft Materials:
Ceramic, Hastelloy® C, or SiC
Polypropylene
PVDF
Maximum Temperature:
180º F (82º C)
220º F (104º C)
|
2605.61 |
|
|
3 and 4 Blade stainless propeller for Suzuki. Front propeller is 25 tooth spline. Rear Propeller is 15 tooth spline and thru hub exhaust. Pairing front and rear SG propellers with the same pitch is strongly recommended.
|
579.99 |
|
|
SpeedZone Max3 - Right Hand - Stainless Steel Propeller - 3-Blade - 14.8" x 25 Pitch
Introducing Turning Point Propellers SpeedZone Max3® high-performance 3-blade stainless steel bass boat propeller series. Extensive testing has shown improved performance against the best competitive brands in the market, making it One Furious Propeller™ for maximizing bass boat performance.
Features:
OAS octagon vents optimize aeration and low-end RPM.
The exhaust escapes out of the open vent hole for faster planning times.
5 OAS options per vent hole (open, L, M, S, & closed).
[L] & [Closed] are included with SpeedZone Max3 propellers.
Compatible with Mercury® props using the PVS® System
Maximizes:
Maximizing SPEED: Higher top-end, get to that fishing spot faster.
Maximizing LIFT: More boat lifts to help carry all gear and tech mounted up front.
Maximizing HANDLING: Faster and safer turns with easier steering.
Maximizing DURABILITY: Tournaments last longer with stronger blade sections.
Maximizing ACCELERATION: Optimized Acceleration System™, for faster planning.
MAXIMIZE the time fishing!
Applications:
SpeedZone Max3 for 150-300+hp outboards with 4.75-5.44” gearcases [Installation/Hub Kit Required]
|
507.88 |
|
|
4 Blade stainless interchangeable hub propeller for 115 and up horsepower engines with thru hub exhaust, 4-3/4" gear case. Category E prop. Requires RBX™ hub kit for installation.
|
477.99 |
|
|
4 Blade stainless propeller for Mercury 90+ horsepower outboard engines, select Mercruiser stern drive engines and Honda/Nissan/Tohatsu 115-250 horsepower engines. All with 15 tooth spline and thru hub exhaust. 4-3/4" gear case.
|
529.99 |
|
|
4 Blade stainless propeller for 150-300 horsepower engines with 15 tooth spline and thru hub exhaust. 4-3/4" Gear Case.
|
537.99 |
|
|
14" x 12" High Performance Trim Tab Kit w/o Switch Kit-12V - Single Actuator
Lenco HP Single & Dual Actuator Electric Trim Tab Kits feature electro-polished 7 Gauge 304SS Blades & Sacrificial Anodes. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Each kit is factory assembled with extreme duty actuators with 3/8" SS bolts, a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
2 each of #15056-001 XD extreme duty actuators with 6' lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware supplied by customer
Actuator extension harnesses (2 for single actuator application or 4 for dual) will be
required. To order the lengths of your choice see the Lenco Accessories Section.
Specifications:
Suggested Boat Length: 16' to 32'
Length of Tab: 14"
Width of Tab: 12"
Minimum Transom Height: 10.5"
Blades: 7 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Switch Required: 10222-211D, 15069-001
or 15070-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1511.23 |
|
|
14" x 12" Heavy Duty Performance Trim Tab Kit w/o Switch Kit -12V
Lenco Electric Heavy Duty Polished Blade Trim Tab Kits are supplied with electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges, 85 degree inside taper and 1/4" diameter hinge pin. Kits equipped with Extreme Duty actuators with 5/16" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes. .
Kit Contents:
2 each of 12-gauge stainless steel Electro-Polished trim tab blades
2 each of #15055-001 XD extreme duty actuators with 6' lead and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
1 each of the Lenco owner’s / installation manual
Boat-mounting hardware supplied by customer
Specifications:
Suggested Boat Length: 19' to 36'
Length of Tab: 14"
Width of Tab: 12"
Minimum Transom Height: 10.5"
Blades: 12 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Switch Required: 15069-001 or 15070-001
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1160.16 |
|
|
For connection from speedometer pickup (pitot) to speedometer. Black vinyl tubing. 25' poly pack.
|
34.99 |
|
|
3 and 4 Blade stainless propeller for Suzuki. Front propeller is 25 tooth spline. Rear Propeller is 15 tooth spline and thru hub exhaust. Pairing front and rear SG propellers with the same pitch is strongly recommended.
|
549.99 |
|
|
3/8" x 25' Nylon Double Braid Dock Line - Grey
Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque-balanced construction, and a unique stabilization process, which produces this long-wearing line that resists kinking.
Applications:
Dock line - ≤55' (16.8 M) vessel
Mooring line - ≤ 30' (9.1 M) vessel
Technical Specifications:
Color: Grey
Material: Double braid nylon
Rope Diameter: 3/8"
Rope Length: 25'
Tensile Strength: 13,100 lb
*Sold as an Individual
|
50.16 |
|
|
1/2" x 25' Nylon Double Braid Dock Line - Grey
Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque-balanced construction, and a unique stabilization process, which produces this long-wearing line that resists kinking.
Applications:
Dock line - ≤55' (16.8 M) vessel
Mooring line - ≤ 30' (9.1 M) vessel
Technical Specifications:
Color: Grey
Material: Double braid nylon
Rope Diameter: 1/2"
Rope Length: 25'
Tensile Strength: 13,100 lb
*Sold as an Individual
|
64.98 |
|
|
5/8" x 25' Nylon Double Braid Dock Line - Grey
Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque-balanced construction, and a unique stabilization process, which produces this long-wearing line that resists kinking.
Applications:
Dock line - ≤55' (16.8 M) vessel
Mooring line - ≤ 30' (9.1 M) vessel
Technical Specifications:
Color: Grey
Material: Double braid nylon
Rope Diameter: 5/8"
Rope Length: 25'
Tensile Strength: 13,100 lb
*Sold as an Individual
|
86.64 |
|
|
3/4" x 25' Nylon Double Braid Dock Line - Grey
Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque-balanced construction, and a unique stabilization process, which produces this long-wearing line that resists kinking.
Applications:
Dock line - ≤55' (16.8 M) vessel
Mooring line - ≤ 30' (9.1 M) vessel
Technical Specifications:
Color: Grey
Material: Double braid nylon
Rope Diameter: 3/4"
Rope Length: 25'
Tensile Strength: 13,100 lb
*Sold as an Individual
|
124.26 |
|