|
14" x 12" Heavy Duty Performance Trim Tab Kit w/o Switch Kit -12V
Lenco Electric Heavy Duty Polished Blade Trim Tab Kits are supplied with electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges, 85 degree inside taper and 1/4" diameter hinge pin. Kits equipped with Extreme Duty actuators with 5/16" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes. .
Kit Contents:
2 each of 12-gauge stainless steel Electro-Polished trim tab blades
2 each of #15055-001 XD extreme duty actuators with 6' lead and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
1 each of the Lenco owner’s / installation manual
Boat-mounting hardware supplied by customer
Specifications:
Suggested Boat Length: 19' to 36'
Length of Tab: 14"
Width of Tab: 12"
Minimum Transom Height: 10.5"
Blades: 12 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Switch Required: 15069-001 or 15070-001
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1160.16 |
|
|
16" x 12" Heavy Duty Performance Trim Tab Kit w/o Switch Kit -12V
Lenco Electric Heavy Duty Polished Blade Trim Tab Kits are supplied with electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges, 85 degree inside taper and 1/4" diameter hinge pin. Kits equipped with Extreme Duty actuators with 5/16" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes. .
Kit Contents:
2 each of 12-gauge stainless steel Electro-Polished trim tab blades
2 each of #15055-001 XD extreme duty actuators with 6' lead and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
1 each of the Lenco owner’s / installation manual
Boat-mounting hardware supplied by customer
Specifications:
Suggested Boat Length: 20' to 38'
Length of Tab: 16"
Width of Tab: 12"
Minimum Transom Height: 10.5"
Blades: 12 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Switch Required: 15069-001 or 15070-001
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1198.50 |
|
|
12" x 12" Heavy Duty Performance Trim Tab Kit w/o Switch Kit -12V
Lenco Electric Heavy Duty Polished Blade Trim Tab Kits are supplied with electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges, 85 degree inside taper and 1/4" diameter hinge pin. Kits equipped with Extreme Duty actuators with 5/16" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes. .
Kit Contents:
2 each of 12-gauge stainless steel Electro-Polished trim tab blades
2 each of #15055-001 XD extreme duty actuators with 6' lead and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
1 each of the Lenco owner’s / installation manual
Boat-mounting hardware supplied by customer
Specifications:
Suggested Boat Length: 18' to 34'
Length of Tab: 12"
Width of Tab: 12"
Minimum Transom Height: 10.5"
Blades: 12 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Switch Required: 15069-001 or 15070-001
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1089.46 |
|
|
17" x 12" Extreme Duty Performance Trim Tab Kit w/o Switch Kit- 12V -Single Actuator Kit
Lenco Electric Extreme Duty Polished Blade Trim Tab Kits feature fast response actuators for precise control. They are fully submersible and feature Plug & Play Deutsch connections. Blades are Electro-Polished 10 Gauge - 304 SS with 1" turned up edges, an 85 degree inside taper and 3/8"diameter hinge pin. Extreme Duty actuators with 3/8" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
2 each of #15056-001XD extreme duty actuators with 6" lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware
Actuator extension harnesses (2 for single actuator application or 4 for dual)
will be required. Order the lengths of your choice. See the Lenco
Accessories section.
Specifications:
Suggested Boat Length: 20' to 40'
Length of Tab: 17"
Width of Tab: 12"
Minimum Transom Height: 10.5"
Blades: 10 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Switch Required: 10222-211D, 15069-001 or 15070-001
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1441.31 |
|
|
18" x 14" Heavy Duty Performance Trim Tab Kit w/o Switch Kit -12V
Lenco Electric Heavy Duty Polished Blade Trim Tab Kits are supplied with electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges, 85 degree inside taper and 1/4" diameter hinge pin. Kits equipped with Extreme Duty actuators with 5/16" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes. .
Kit Contents:
2 each of 12-gauge stainless steel Electro-Polished trim tab blades
2 each of #15055-001 XD extreme duty actuators with 6' lead and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
1 each of the Lenco owner’s / installation manual
Boat-mounting hardware supplied by customer
Specifications:
Suggested Boat Length: 22' to 42'
Length of Tab: 18"
Width of Tab: 14"
Minimum Transom Height: 10.5"
Blades: 12 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Switch Required: 15069-001 or 15070-001
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1250.47 |
|
|
24" x 14" Extreme Duty Performance Trim Tab Kit w/o Switch Kit- 12V- Dual Actuator Kit
Lenco Electric Extreme Duty Polished Blade Trim Tab Kits feature fast response actuators for precise control. They are fully submersible and feature Plug & Play Deutsch connections. Blades are Electro-Polished 10 Gauge - 304 SS with 1" turned up edges, an 85 degree inside taper and 3/8"diameter hinge pin. Extreme Duty actuators with 3/8" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
4 each of #15056-001XD extreme duty actuators with 6" lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware
Actuator extension harnesses (2 for single actuator application or 4 for dual)
will be required. Order the lengths of your choice. See the Lenco
Accessories section.
Specifications:
Suggested Boat Length: 25' to 50'
Length of Tab: 24"
Width of Tab: 14"
Minimum Transom Height: 10.5"
Blades: 10 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Switch Required: 15071-001
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2455.00 |
|
|
19" x 14" Extreme Duty Performance Trim Tab Kit w/o Switch Kit- 12V- Dual Actuator Kit
Lenco Electric Extreme Duty Polished Blade Trim Tab Kits feature fast response actuators for precise control. They are fully submersible and feature Plug & Play Deutsch connections. Blades are Electro-Polished 10 Gauge - 304 SS with 1" turned up edges, an 85 degree inside taper and 3/8"diameter hinge pin. Extreme Duty actuators with 3/8" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
4 each of #15056-001XD extreme duty actuators with 6" lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware
Actuator extension harnesses (2 for single actuator application or 4 for dual)
will be required. Order the lengths of your choice. See the Lenco
Accessories section.
Specifications:
Suggested Boat Length: 23' to 45'
Length of Tab: 19"
Width of Tab: 14"
Minimum Transom Height: 10.5"
Blades: 10 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Switch Required: 15071-001
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2215.55 |
|
|
Heavy Duty Performance Trim Tabs
Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are Electro-Polished 12 Gauge - 304 SS with 1" turned up edges, 85 degree inside taper, and 1/4" diameter hinge pin. Extreme Duty actuators with 5/16" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
We make the best boats better!™
Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's HD series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different?
All stainless steel construction (no dissimilar metals), Electro-Polished Blades for long lasting good looks
Actuator speed is precise and controllable so there are no surprises at top speeds
Models have massive backplates and adjustable mounting channels with thru-bolted actuators for the ultimate in strength and reliability
Models use solid stainless steel billet rams that are chemically polished for unsurpassed durability
Actuators
Instant response
Fully submersible, maintenance-free and sealed for life
High-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case
5/16" stainless steel bolts
Tactile Switch w/ Indicator LED for all Single Actuator Trim Tab Systems
Features:
Self-contained, sealed keypad
Self-contained, sealed control box module
Fade/smudge-proof, laser engraved graphics
Plug & play switch wiring harness connector
Includes 36" power pigtail for control box
2" hole cut-out size, overall size 2.75" x 2.75"
Built-in retract feature returns tabs to a fully retracted position when power is removed
2 high-intensity L.E.D. indicator displays show the exact position of our trim tabs at all times
Photo eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sunlight
12 & 24-volt compatibility
Includes Self-Check Feature
Each kit contains:
Tactile LED Indicator Switch Kit
2 actuators wth 6' Lead and Deutsch Plugs
2 12 Gauge SS Electro-Polished trim tab planes
2 20' Actuator Extension Wiring Harnesses
Boat-Mounting Hardware supplied by customer
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1544.59 |
|
|
Heavy Duty Performance Trim Tabs
Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are Electro-Polished 12 Gauge - 304 SS with 1" turned up edges, 85 degree inside taper, and 1/4" diameter hinge pin. Extreme Duty actuators with 5/16" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
We make the best boats better!™
Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's HD series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different?
All stainless steel construction (no dissimilar metals), Electro-Polished Blades for long lasting good looks
Actuator speed is precise and controllable so there are no surprises at top speeds
Models have massive backplates and adjustable mounting channels with thru-bolted actuators for the ultimate in strength and reliability
Models use solid stainless steel billet rams that are chemically polished for unsurpassed durability
Actuators
Instant response
Fully submersible, maintenance-free and sealed for life
High-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case
5/16" stainless steel bolts
Standard Solid State Tactile Switch Kits with Retractor Feature
#15069-001 (124SSR)
For 12-volt single actuator systems. Control box is waterproof, self-contained, sealed, solid state, Deutsch connected for easy Plug & Play installation, and features built-in retractor. Kit includes 36" power pigtail and nylon nuts for mounting keypad. Colorful display box.
Features
Built-In Retractor Feature
Solid State Electronics
Plug & Play
Low Profile Design
Self-Contained, sealed keypad & solid state control box with waterproof connectors
Simple, Quick Installation
Includes 36" power pigtail for control box
2" hole cut-out size, overall size 2.75" x 2.75'
Each kit contains:
Standard Tactile Switch Kit
2 actuators wth 6' Lead and Deutsch Plugs
2 12 Gauge SS Electro-Polished trim tab planes
2 20' Actuator Extension Wiring Harnesses
Boat-Mounting Hardware supplied by customer
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1402.27 |
|
|
14" x 12" High Performance Trim Tab Kit w/o Switch Kit-12V - Single Actuator
Lenco HP Single & Dual Actuator Electric Trim Tab Kits feature electro-polished 7 Gauge 304SS Blades & Sacrificial Anodes. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Each kit is factory assembled with extreme duty actuators with 3/8" SS bolts, a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
2 each of #15056-001 XD extreme duty actuators with 6' lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware supplied by customer
Actuator extension harnesses (2 for single actuator application or 4 for dual) will be
required. To order the lengths of your choice see the Lenco Accessories Section.
Specifications:
Suggested Boat Length: 16' to 32'
Length of Tab: 14"
Width of Tab: 12"
Minimum Transom Height: 10.5"
Blades: 7 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Switch Required: 10222-211D, 15069-001
or 15070-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1511.23 |
|
|
21" x 14" High Performance Trim Tab Kit w/o Switch Kit-12V - Dual Actuator
Lenco HP Single & Dual Actuator Electric Trim Tab Kits feature electro-polished 7 Gauge 304SS Blades & Sacrificial Anodes. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Each kit is factory assembled with extreme duty actuators with 3/8" SS bolts, a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
4 each of #15056-001 XD extreme duty actuators with 6' lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware supplied by customer
Actuator extension harnesses (2 for single actuator application or 4 for dual) will be
required. To order the lengths of your choice see the Lenco Accessories Section.
Specifications:
Suggested Boat Length: 24' to 42'
Length of Tab: 21"
Width of Tab: 14"
Minimum Transom Height: 10.5"
Blades: 7 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Switch Required: 15071-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2216.93 |
|
|
25" x 14" High Performance Trim Tab Kit w/o Switch Kit-12V - Dual Actuator
Lenco HP Single & Dual Actuator Electric Trim Tab Kits feature electro-polished 7 Gauge 304SS Blades & Sacrificial Anodes. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Each kit is factory assembled with extreme duty actuators with 3/8" SS bolts, a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
4 each of #15056-001 XD extreme duty actuators with 6' lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware supplied by customer
Actuator extension harnesses (2 for single actuator application or 4 for dual) will be
required. To order the lengths of your choice see the Lenco Accessories Section.
Specifications:
Suggested Boat Length: 28' to 46'
Length of Tab: 25"
Width of Tab: 14"
Minimum Transom Height: 10.5"
Blades: 7 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Switch Required: 15071-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2541.64 |
|
|
18" x 12" High Performance Trim Tab Kit w/o Switch Kit-12V - Single Actuator
Lenco HP Single & Dual Actuator Electric Trim Tab Kits feature electro-polished 7 Gauge 304SS Blades & Sacrificial Anodes. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Each kit is factory assembled with extreme duty actuators with 3/8" SS bolts, a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
2 each of #15056-001 XD extreme duty actuators with 6' lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware supplied by customer
Actuator extension harnesses (2 for single actuator application or 4 for dual) will be
required. To order the lengths of your choice see the Lenco Accessories Section.
Specifications:
Suggested Boat Length: 20' to 40'
Length of Tab: 18"
Width of Tab: 12"
Minimum Transom Height: 10.5"
Blades: 7 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Switch Required: 10222-211D, 15069-001
or 15070-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1575.28 |
|
|
Heavy Duty Performance Trim Tabs
Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are Electro-Polished 12 Gauge - 304 SS with 1" turned up edges, 85 degree inside taper, and 1/4" diameter hinge pin. Extreme Duty actuators with 5/16" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
We make the best boats better!™
Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's HD series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different?
All stainless steel construction (no dissimilar metals), Electro-Polished Blades for long lasting good looks
Actuator speed is precise and controllable so there are no surprises at top speeds
Models have massive backplates and adjustable mounting channels with thru-bolted actuators for the ultimate in strength and reliability
Models use solid stainless steel billet rams that are chemically polished for unsurpassed durability
Actuators
Instant response
Fully submersible, maintenance-free and sealed for life
High-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case
5/16" stainless steel bolts
Tactile Switch w/ Indicator LED for all Single Actuator Trim Tab Systems
Features:
Self-contained, sealed keypad
Self-contained, sealed control box module
Fade/smudge-proof, laser engraved graphics
Plug & play switch wiring harness connector
Includes 36" power pigtail for control box
2" hole cut-out size, overall size 2.75" x 2.75"
Built-in retract feature returns tabs to a fully retracted position when power is removed
2 high-intensity L.E.D. indicator displays show the exact position of our trim tabs at all times
Photo eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sunlight
12 & 24-volt compatibility
Includes Self-Check Feature
Each kit contains:
Tactile LED Indicator Switch
2 actuators wth 6' Lead and Deutsch Plugs
2 12 Gauge SS Electro-Polished trim tab planes
2 20' Actuator Extension Wiring Harnesses
Boat-Mounting Hardware supplied by customer
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1435.55 |
|
|
12" x 9" Standard Performance Trim Tab Kit w/o Switch Kit- 12V
Upgraded electro-polished trim blades with stouter 1/4" diameter hinge pin make these Performance Trim Tab Kits a cut above the base level Lenco Standard Mount Kits. Equipped with the same fast response electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges (the 16" x 12" and the 18" x 14" have an 85 degree inside taper) and 1/4" diameter hinge pin. Kit includes Standard Actuators with 5/16" SS bolts. The actuators mount at the trailing edge of the blades
Kit Contents:
2 each of 12-gauge stainless steel Electro-Polished trim tab blades
2 each of #15054-001 actuators with 6' lead and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
2 each of #15085-001 (#116) upper mounting bracket with gland seal
2 each of #50014-001 (#119) lower mounting bracket
1 each of the Lenco owner’s / installation manual
All necessary stainless steel mounting hardware
Specifications:
Suggested Boat Length: 16' to 26'
Length of Tab: 12"
Width of Tab: 9"
Minimum Transom Height: 11"
Blades: 12 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
682.24 |
|