|
Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame
|
1794.96 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 1/4" x 6" - 10-Pack - Black
Package of 10 Black 6"(15.2cm) long sections with a 1/4"(6.4mm) diameter that shrinks to 5/64"(2mm)
Wire Range: 16-10 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.58 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 1/4" x 6" - 10-Pack - Red
Package of 10 Red 6"(15.2cm) long sections with a 1/4"(6.4mm) diameter
that shrinks to 5/64"(2mm)
Wire Range: 16-10 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
13.94 |
|
|
Plastic 3 blade propeller for 2.5 and 3.3HP Mercury/Nissan/Tohatsu and 3.5HP BRP/Johnson/Evinrude. Pin drive.
|
15.89 |
|
|
Hollow Back 304 Stainless Steel Rub Rail Insert 3/4" x 6'
Sold in 6' increments.
Features:
Sold in 6'
Stainless Steel Type-304/316L
Drilled and countersunk for #8 screws on 6-inch centers
5-year limited warranty
|
59.89 |
|
|
Ampco Pumps KC2 2 1/2 X 2 Fluid End Nialbz 5.00" Trim
|
3440.34 |
|
|
4028 AC Isolation Cover - 7-1/2 x 10-1/2x3
Features:
Provides electrical insulation for exposed panel backs
Provides mechanical protection for panel backs protruding into lockers
Lightweight material is easily drilled for wire entrance and exit
Meets ABYC requirements for panels with combined AC and DC
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
71.21 |
|
|
4" x 6" Weatherproof PA Speaker Horn - White
Features:
Frequency Response: 200Hz - 15kHz
Sensitivity (1W/1M): 110dB
Dimensions: 8" L x 6" W x 4" H
Includes stainless steel mounting hardware and ABS plastic base
Bracket pivots 90°
|
24.00 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 1/8" x 6" - 10-Pack - Black
Package of 10 Black 6"(15.2cm) long sections with a 1/8"(3.2mm) diameter that shrinks to 1/32"(0.8 mm)
Wire Range: <18 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
9.58 |
|
|
3 Blade plastic propeller for BF2 Series engines.
|
27.99 |
|
|
Battery Cable Adhesive Lined Heavy Wall Battery Cable Tubing (BCT) - 3/4" x 6" - Yellow - 3 Pieces
Features:
3:1 ratio
Shrinks at 257°F/125°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.96 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 1/2" x 6" - 5-Pack - Black
Package of 5 Black 6"(15.2cm) long sections with a 1/2"(12.7mm) diameter that shrinks to 5/32"(4mm)
Wire Range: 8-4 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
9.58 |
|
|
Heat Shrink Tubing 1/2" x 6" - Red - 5 Pieces
Package of 5 Red 6 in (15.2 cm) long sections with a 1/2 in (12.7 mm) diameter that shrinks to 5/32 in (4 mm).
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257 deg F / 125 deg C
Operating temperature range of -40 deg C to 110 deg C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
9.34 |
|
|
Stainless Steel Deck Step 2-1/4" x 8-3/8"
Injection Molded Rubber/Stamped 304 Stainless Steel
These Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel.
|
20.78 |
|
|
Stainless Steel Deck Step 3-1/4" x 8-3/8"
Injection Molded Rubber/Stamped 304 Stainless Steel
These Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel.
|
21.44 |
|