|
Stainless Steel Deck Step 2-1/4" x 8-3/8"
Injection Molded Rubber/Stamped 304 Stainless Steel
These Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel.
|
20.78 |
|
|
Stainless Steel Deck Step 3-1/4" x 8-3/8"
Injection Molded Rubber/Stamped 304 Stainless Steel
These Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel.
|
21.44 |
|
|
Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame
|
1794.96 |
|
|
Stainless Steel Deck Plate - 3"
Use with Sea-Dog® Deck Plate Keys 335680 or 335699 (not included). Use anti-seize lubricant to protect threads from galling.
|
65.39 |
|
|
Stainless Steel Flush Mount Gas Tank Vent 5/8" Hose - Straight
The Flush Mount Gas Tank Vent provides the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. Helps prevent fuel spills, blow-back, and ensures fumes vent outboard instead of inside the boat. An integral 5/8" hose barb securely connects vent hose. Constructed of corrosion resistant investment cast 316 stainless steel.
|
25.91 |
|
|
Stainless Steel Butterfly Vent - Center Knob - 4"
Butterfly Vents promote air flow preventing mold, mildew, and associated odors. Features a center knob that allows for easy adjustment of the opening. Corrosion resistant 304 stainless steel construction. Installs with four #6 RH fasteners (not included).
|
9.02 |
|
|
Ronstan Glue-In Plastic Nylon Bush - Stainless Steel Lined - 7mm(9/32") ID x 5mm(3/16") Deep
Features:
Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
Manufactured from Nylon, styles and sizes to suit different rope diameters
Fairleads with stainless steel liners provide greater abrasion resistance
May be glued or pressed into place
Impact resistant, UV stabilized Nylon
|
8.04 |
|
|
Ronstan Screw-On Plastic Nylon Bush - Stainless Steel Lined - 7mm(9/32") ID x 5mm(3/16") Deep
Features:
Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
Manufactured from Nylon, styles and sizes to suit different rope diameters
Fairleads with stainless steel liners provide greater abrasion resistance
Impact resistant, UV stabilized Nylon
|
9.85 |
|
|
Ronstan Screw-On Plastic Nylon Bush - Stainless Steel Lined - 11mm(7/16") ID x 5mm(3/16") Deep
Features:
Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
Manufactured from Nylon, styles and sizes to suit different rope diameters
Fairleads with stainless steel liners provide greater abrasion resistance
Impact resistant, UV stabilized Nylon
|
11.64 |
|
|
Express® Mach4™ - Left Hand - Stainless Steel Propeller - EX-1513-4L - 4-Blade - 15.3" x 13 Pitch
The Prop that put the "four" in Performance! Turning Point's Four Blade revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced an aluminum propeller with two different blade shapes (they call it Dual Geometry) for 90-300+hp applications. This prop is uniquely engineered with two blade geometries: two blades utilize the high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and two blades utilize an offshore style design for high speed and maximum stern lift.
These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers.
Now manufactured in the Industry leading TP17 stainless, the Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.
Proprietary Stainless Steel, TP17™
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.
Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
384.55 |
|
|
Express® Mach4™ - Left Hand - Stainless Steel Propeller - EX-1423-4L - 4-Blade - 14.3" x 23 Pitch
The Prop that put the "four" in Performance! Turning Point's Four Blade revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced an aluminum propeller with two different blade shapes (they call it Dual Geometry) for 90-300+hp applications. This prop is uniquely engineered with two blade geometries: two blades utilize the high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and two blades utilize an offshore style design for high speed and maximum stern lift.
These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers.
Now manufactured in the Industry leading TP17 stainless, the Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.
Proprietary Stainless Steel, TP17™
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.
Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
384.55 |
|
|
Stainless Steel Louvered Vent - 9-1/8" x 4-5/8"
Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
|
16.32 |
|
|
Stainless Steel Flag Pole Socket - 1"
The 10° Flagpole Socket accepts flagpoles either 1” or 1-1/4” in diameter. Set screw holds flagpole in place. Maximum speed 10 MPH. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three #10 FH fasteners (not included).
|
22.57 |
|
|
Stainless Steel Locker Vent - 2-3/8" x 6-3/4"
Locker Vents are designed to promote air circulation in interior areas and prevent mold, mildew, and unpleasant odors. Easy to install with six #8 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 2.56 in2.
|
8.42 |
|
|
Lift Handle
Size:2-1/4" x 3"
Fastener:#8(4)
Material:304 Stainless Steel
|
9.44 |
|