Universal D Size Ball Mount with Short Arm for 9"-12" Fishfinders and Chartplotters The RAM-D-115-C consists of a base with a 2.25” diameter D size ball, a short arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices. This marine electronic plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fishfinder gimbal brackets. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more. Overall Length: 7.325" Weight Capacity: Up to 10 lbs. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber "D" Ball Size

Universal D Size Ball Mount with Short Arm and Hi-Torq™ Wrench for 9"-12" Fishfinders and Chartplotters The RAM-D-115-C-KNOB9H consists of a base with a 2.25” diameter D size ball, a short arm, a Hi-Torq™wrench and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices. This marine electronic plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fishfinder gimbal brackets. For cold weather environments, the included Hi-Torq wrench helps to tighten the knob on the arm for a secure hold. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more. Overall Length: 7.325" Weight Capacity: Up to 10 lbs. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber "D" Ball Size

Universal D Size Ball Mount for 9"-12" Fishfinders and Chartplotters The RAM-D-115 consists of a base with a 2.25” diameter D size ball, a standard arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices. This marine electronic plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fishfinder gimbal brackets. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more. Overall Length: 10.7" Weight Capacity: Up to 10 lbs. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber "D" Ball Size

Universal D Size Ball Mount with Long Arm for 9"-12" Fishfinders and Chartplotters The RAM-D-115-E consists of a base with a 2.25” diameter D size ball, a long arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices. This marine electronic plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fishfinder gimbal brackets. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more. Overall Length: 15.2" Weight Capacity: Up to 10 lbs. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber "D" Ball Size

The 2.25" D Size Balls from Ram Mount

RAM Universal Drill-Down Laptop Mount Swing Arm Connects to 2.5" Diameter Ball Base. Ball Size: 1.5" Rubber Ball Color: Black Powder Coat Material: Powder Coated Marine Grade Aluminum

RAM® D Size Souble Ball Adapter The RAM-D-230U is a 2.25" double ball connector, allowing you to connect two socket arms together and maintain a flexible mount.  Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: D Size 2.25" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.83 lbs.

RAM 1" Diameter Ball Mount with Short Arm & 2/Diamond Bases The RAM-B-102U-A consists of a short double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Double 6" Swing Arm with 6.25" x 2" Rectangle Base and Horizontal Mounting Base The RAM double swing arm mount includes two 6" long BENT swing arms mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.25 x 2" top base. The pivoting points of the mount allow a complete 360° rotation. Dimensions:  Overall length: 16.69" Overall height: 8.577" Height from bottom of base to top of knob: 4.89" Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag

Single 6" Swing Arm with 6.25" x 2" Rectangle Base and Vertical Mounting Base The RAM single swing arm mount consists of a 6" long swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360° rotation. Max Weight Capacity: 10 lbs. Dimensions:  Center of knob to center of ball socket: 6" Overall length of swing arm assembly: 11.4375" Overall height: 8.45" Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag. The included plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.

Universal X-Grip® Cradle with 1" Ball & STANDARD Length Double Socket Arm for 7" Tablets Consists of a STANDARD length double socket arm and universal X-Grip® clamping cradle for 7" tablets. The double socket arm is 3.69" in length and will accept all RAM 1" diameter ball bases. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your 7" tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions Minimum Width = 2.5" (Minimum Height = 7") Maximum Width = 5.75" (Minimum Height = 4") Depth = 0.875" Specs & Features Spring loaded cradle expands and contracts for perfect fit of your tablet Rubber coated tips will hold your tablet firm and stable Socket technology allows for multiple adjustment angles and articulation of your tablet Easy access grip knobs, located on the back of the cradle for quick release of your tablet Includes Tether for open cockpit and extreme environments Lifetime warranty Rustproof Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.5 lbs. Compatible Devices: 7" Screen Tablets Amazon Kindle Fire Amazon Kindle Fire HD Amazon Kindle Fire HDX Apple iPad mini Apple iPad mini 2 Apple iPad mini 3 Apple iPad mini 4 Nexus 7 Samsung Galaxy Tab 2 7.0 Samsung Galaxy Tab 3 7.0 Samsung Galaxy Tab 4 7.0 Samsung Galaxy Tab A 8.0 Samsung Galaxy Tab S2 8.0 Samsung Galaxy Tab S 8.4

1.5" Double Ball Mount with Hardware for Garmin Striker + More The RAM-101-G4 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and round adapter base that attaches directly to the back of the Garmin echo. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Included is hardware that is used to attach the Garmin echo to the RAM Mount. This mount is compatible with the following Garmin devices:  Striker 4 Striker 4dv Striker Plus 4cv echo 100 echo 150 echo 300c ECHOMAP Plus 42cv ECHOMAP Plus 43cv ECHOMAP Plus 44cv ECHOMAP Plus 45cv Ball Size: 1.5" Rubber Ball Size Material:  Powder Coated Marine Grade Aluminum Product Dimensions Overall Height: 5" Socket-To-Socket Length 3" Hole Pattern 4-Hole AMPS: 1.181" x 1.496" 3-Hole 120-Degree: 1.812" Diameter Note: Part number reflects product packaged in clear clam shell for store shelf display.

GPS - Track Plotter

Universal No-Drill RAM Pod HD Vehicle Mount w/Double Socket Arm & 2.5" Round Base (AMPS Hole Pattern) Pole Length: 12" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Quick Release Rail Mount 1.5" Universal Quick Release Track Rail Adapter