|
Double 6" Swing Arm with 6.25" x 2" Rectangle Base and Horizontal Mounting Base
The RAM double swing arm mount includes two 6" long BENT swing arms mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.25 x 2" top base. The pivoting points of the mount allow a complete 360° rotation.
Dimensions:
Overall length: 16.69"
Overall height: 8.577"
Height from bottom of base to top of knob: 4.89"
Material:
Powder Coated Marine Grade Aluminum
Note:
The "U" in the part number reflects product packaged in poly bag
|
96.13 |
|
|
1" Ball Mount with 6.25" X 2" Rectangle Base & Diamond Base
The RAM-B-111-238U consists of a double socket arm, 2.43" x 1.31" diamond base and 6.25" x 2" rectangle base. The diamond base contains two holes 1.912" from center to center, positioned at both ends of the base. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag.The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
Weight: 0.66 lbs.
|
32.00 |
|
|
Single 6" Swing Arm with 6.25" x 2" Rectangle Base and Vertical Mounting Base
The RAM single swing arm mount consists of a 6" long swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360° rotation.
Max Weight Capacity:
10 lbs.
Dimensions:
Center of knob to center of ball socket: 6"
Overall length of swing arm assembly: 11.4375"
Overall height: 8.45"
Material:
Powder Coated Marine Grade Aluminum
Note:
The "U" in the part number reflects product packaged in poly bag. The included plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
73.36 |
|
|
Horizontal 6" Swing Arm Mount with Ball
The RAM-109H-2BU consists of a 6" long STRAIGHT swing arm mounted on a horizontal surface mounting base. At the free end of the mount swing arm is a round 1.5" diameter ball. The connection between the swing arm and the base is a bolt pivot point, and the round plate and arm connection is the RAM ball and socket system. The bolt pivoting point allows a complete 360 degree rotation and the ball and socket system allows a 180 degree vertical pivot with a 360 degree rotation.
Specifications:
Material: Powder Coated Marine Grade Aluminum
Ball Size: C Size 1.5" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 1.67 lbs.
|
87.73 |
|
|
RAM Double Socket Arm w/Jam Nut f/2.25" Ball Bases
Part #: RAM-D-201U-MI1
The RAM-D-201U-MI1, standard size double socket arm with jam nut, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 8.375"
Socket-To-Socket Length: 6.5625"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
2.25" Rubber Ball "D" Size
|
75.55 |
|
|
The RAP-111U consists of a 2" x 1.7" 2" x 1.7" square base that contains the universal AMPs hole pattern, STANDARD LENGTH double socket arm and 6.25" x 2" rectangle base. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
The RAP-111U is Compatible With:
Garmin Fishfinders and GPS Chartplotters
Humminbird Fishfinders and GPS Chartplotters
Lowrance Fishfinders and GPS Chartplotters
Raymarine Fishfinders and GPS Chartplotters
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
|
38.75 |
|
|
RAM Short Double Socket Arm f/3-3/8" Bases
Part #: RAM-E-201U-D
The RAM-E-201U-D short double socket arm has a socket at both ends that accomodates 3-3/8" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 7.25"
Socket-to-Socket Length: 4.375"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
3.38" Rubber Ball E Size
|
106.10 |
|
|
RAM Double Socket Arm f/3-3/8" Ball Bases
Part #: RAM-E-201U
The RAM-E-201U double socket arm has a socket at both ends that accommodates 3.38" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. The socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 12.625"
Socket to Socket Length: 9.875"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
3.38" Rubber Ball E Size
|
158.98 |
|
|
The RAM-D-201U powder coated marine grade aluminum 6.88" double socket arm allow for connnection to a 2.25" diameter ball. Socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 8.375"
Socket-To-Socket Length: 6.5625"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
2.25" Rubber Ball "D" Size
|
69.64 |
|
|
RAM Double Socket Swivel Arm for 1" Ball Bases
The RAP-B-200-2U consists of double 1" diameter open ball sockets with a 360 degree rotation point at the center and a connecting swivel joint that rotates forward and back 180x. The rubber ball and socket at either end, and a central pivot point provides unsurpassed adjustability. The RAM ball sockets maximize ball coverage for optimal fit.
Dimensions:
Overall Length: 6.25"
Socket-To-Socket Length: 5"
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
20.36 |
|
|
RAM 12" Double Swing Arm with 2.5" Diameter Round Base
The RAM-VB-110-1U consists of a double swing arm with swivel socket arm and 2.5" diameter round base with the universal AMPS hole pattern. This mount allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM vehicle mount. Taking the highly successful RAM vehicle mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place.
Double Swing Arm Length: 12"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
71.17 |
|
|
RAM 12" Long Double Swing Arm with Open Swivel Single Socket
The RAM-VB-110-4U consists of two 6" long single swing arms, Tele-Pole connection hole and swivel single socket that will accommodate 1.5" ball bases. The two swing arms connect with a bolt and knob system. With a simple turn of the knob you can pivot the swing arms at this center point and the tighten the knob to lock the arms in place. The swivel single socket arm allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. Easily incorporated into numerous RAM systems, this rotating swing arm is available with the standard 1.5 inch ball size or the heavy duty 2.25 inch ball size.
Swing Arm Length:
12"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
59.90 |
|
|
Double U-Bolt Base w/D Size 2.25" Ball for Rails from 1" to 1.25" in Diameter
The RAM-D-235U consists of a double u-bolt base with 2.25" diameter ball and two stainless steel u-bolts. The double u-bolt base will accommodate rails from 0.75" to 1.25" in diameter.
HARDWARE INCLUDED
(2) 1/4"-20 U-Bolts for 1" - 1.25" Rails
(4) 1/4"-20 Nylock Nuts
(4) Rubber Caps
CLAMP RANGE
1" - 1.25" diameter
BALL SIZE
D Size (2.25")
WEIGHT CAPACITY
Standard Use: 6 lbs
Heavy-Duty Use: 5 lbs
Note:
The "U" in the part number reflects product packaged in poly bag. This mount includes stainless steel u-bolts for preventing rust of the mount and black cover caps to be placed over the exposed ends of the u-bolt.
Weight:
0.86 lbs
|
35.60 |
|
|
RAM Short Double Socket Arm with Jam Nut for 2.25" Ball Bases
Part #: RAM-D-201U-C-MI1
The RAM-D-201U-C-MI1, short double socket arm with jam nut, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 5.0625"
Socket-To-Socket Length: 3.1875"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
2.25" Rubber Ball "D" Size
|
50.05 |
|
|
Tough-Ball™ with M8-1.25 x 10mm Threaded Stud
Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and steel durability allows for a multitude of real world, and out of this world, applications. With so many of the things we use incorporating threads and fasteners, there really is no limit to the number of uses you’ll find for the RAM Tough-Ball™.
The RAP-379U-M812510 consists of a 1.5" diameter rubber ball, connected to a M8-1.25 X 10MM male threaded post.
Specifications:
Metric Thread Diameter and Pitch Options: M8-1.25 X 10MM
Material: High Strength Composite & Steel
Ball Size: C Size 1.5" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag
|
11.02 |
|