Stud Catch Length: 2-1/4" Width: 7/16" Fastener: #8(4) Material: Brass

Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame

TACO Flex Vinyl Rub Rail Kit - Black w/White Insert - 50' - 1-1/4" x 15/16" Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide. Features: Vinyl Rub Rail Kit Black with White Insert 50' 1-1/4" x 15/16"

Flex Vinyl Rub Rail Kit - Black with Black Insert - 70' - 1-1/4" x 15/16" Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide Features: Black with Black Insert Vinyl Rub Rail Kit 1-1/4" x 15/16" 70'

Lift Handle Size:2-1/4" x 3" Fastener:#8(4) Material:304 Stainless Steel

Stainless Steel Deck Step 2-1/4" x 8-3/8" Injection Molded Rubber/Stamped 304 Stainless Steel These Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel.  

Lift Handle Size:2-1/4" x 2-5/8" Fastener:#8(4) Material:304 Stainless Steel

4027 AC Isolation Cover - 5-1/4 x 7-1/2x3 Features: Provides electrical insulation for exposed panel backs Provides mechanical protection for panel backs protruding into lockers Lightweight material is easily drilled for wire entrance and exit Meets ABYC requirements for panels with combined AC and DC Covers a panel, or other object, 7-1/2" long x 5-1/4" wide, x 3" deep WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Clam Shell Midget Vent 2-1/4" x 2-1/4" Material: 304 Stainless Steel Size: 2-1/4" x 2-1/4" Fastener: #6 (3)

Stud Catch Length: 2-3/4" Width: 1/2" Fastener: #8(2) Material: 316 Stainless Steel

Fixed Anchor Swivel - 1/4" to 5/16" Heavy-duty 360-degree anchor swivel. Used to attach line and chain or chain and anchor. Compatible with: 1/4" to 7/16" Chain Features: Stainless Steel screw pins Stainless Steel swivel pins Technical Specifications: Material - 316 Stainless Steel *Sold as an Individual

Anchor Replacement Roller - 2-3/4" x 2-7/8" Features: Nylon Replacement Wheel Diameter: 2-3/4" Width: 2-7/8" Rope Size: 3/4"

101 XD Actuator- 12 Volt- 2-1/4  Stroke with Mounting Hardware The 101 XD Actuator is used mostly with HD, XD, High Performance and Super Strong tabs. 2.25 stroke. Overall length (tip to tip) is 113/8 inches.   Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing. Specifications: Newly implemented Anti Extrusion Ring (AXR) seal stabilization system. Stronger top cap and mounting clevis design Improved pressure-tight torx screws Integrated wiper seal at actuator base Molded-in brass thrust bearing design Thicker and stronger motor housing wall Improved O-Ring design for more consistent seal Over-molded cable providing a stronger tighter seal Upper mounting bracket with gland seal Features: Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics Lenco's tough, high-torque actuator motor easily pushes 500 pounds. Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion. 12 Volt 5/16" mounting hardware 6 foot cable WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

101 XD Actuator- 24 Volt- 2-1/4  Stroke with Mounting Hardware The 101 XD Actuator is used mostly with HD, XD, High Performance and Super Strong tabs. 2.25 stroke. Overall length (tip to tip) is 113/8 inches.   Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing. Specifications: Newly implemented Anti Extrusion Ring (AXR) seal stabilization system. Stronger top cap and mounting clevis design Improved pressure-tight torx screws Integrated wiper seal at actuator base Molded-in brass thrust bearing design Thicker and stronger motor housing wall Improved O-Ring design for more consistent seal Over-molded cable providing a stronger tighter seal Upper mounting bracket with gland seal Features: Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics Lenco's tough, high-torque actuator motor easily pushes 500 pounds. Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion. 24 Volt 5/16" mounting hardware 6 foot cable WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Door Stop & Catch - Brass - 2"  The Sea-Dog® Door Stop and Catch holds the door securely against the rubber stop, effectively reducing rattling common with most door hooks. The spring-loaded latch allows for quick and easy release. Constructed of sand cast brass with a plain polished or chrome plated finish. These door stops are both decorative and functional. Installs with five #6 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.