Wind Repeater Display Add or replace the display on the Clipper Wind V2 – 3 wire wind mast unit and the Clipper Wireless wind unit.  The Clipper Wind NMEA Repeater has user a selectable pointer style and selectable wind speed scale. It requires the standard NMEA 0183 MWV data sentence. Technical Specifications: Works with NMEA 0183 NMEA protocol  7 levels of display backlighting Dimensions  (H x W x D) - 4.33" x 4.33" x 1.18" (110 x 110 x 30mm) In the Box: 16.5' (5 M) Cable Mounting 'O' ring  Weather cover *Sold as Individual  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

The Clipper Log Repeater has its own independent alarm function as well as repeating all data from the master unit. Technical Specifications: 40mm high digits 7 level display backlighting Complete with 5 meter cable, 'O' ring and weather cover Consumption 10mA + 25mA for display backlightThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

The Clipper GPS repeater has quickly established itself as the market leader in cockpit GPS repeaters. Typical of the Clipper range it boats large clear digits and simple operation. Installation coundn't be simpler with just two wing nuts to fasten the unit into the panel ans two wires to connect to the GPS. Technical Specifications: Standard 110mm case Super large high contrast LCD Four instantly accessable display screens Standard NMEA 0183 interface suits most Complete with weather cover and 10 meters of cableThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

If you are looking for cockpit instruments that feature cutting edge technology yet are intuitively simple to operate, look no further. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case. Ease of use and display clarity were top of the design brief. All Clipper instruments have giant digits and multilevel backlighting. Technical Specifications: 40mm high digits Depth below transducer/below keel/below surface Deep and shallow alarms (audio and visual) User selectable feet or meters Intellegent gain control & manual override Selectable display rate and depth averaging rate Depth trend indicator No echo indicator High transmit power All settings stored in non volatile memory Tactile keypad Consumption 20mA + 25Ma for backlight (max) ***Note - this is not a stand alone unit and cannot be connected to a depth transducer. It must be connecetd to the Clipper Depth master display unit. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

The Clipper Compass Repeater has all the features of the master unit and an independent off course alarm. Steer to course function When the steering function is selected a series of chevrons accumulate showing the magnitude and direction of the steering error. To stay on course simply turn the wheel in the direction of the chevrons until they are extinguished. The steering sensitivity can be preset by the user. An off course alarm provides a safety feature when not at the helm. If the heading deviates by more than a preset amount then the alarm will sound. Technical Specifications: Adjustable Damping 1 degree display resolution Display case size 110 x 110mm Depth behind panel 30mm Complete with 5 meter cable, 'O' ring and weather cover This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Tactical True Apparent Wind Display Repeater The Clipper True Wind Display shows apparent wind speed and direction, when connected to a log or GPS, it can also show true wind speed and direction. Requires NMEA boat speed input either VHW from log or RMC from GPS for True wind speed and direction. Features: Supply voltage nominal 12 Volts Supply current 10mA + (10mA for back light illumination Max) NMEA input sentence MWV Back light – 9 levels Pointer style – 2 Display wind speed – 0 to 99 Kts Display Wind angle – 0 to 360 degrees represented by 60 segments Display case size 110 x 110mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Wireless Masthead & Data Box The mast head transmitter is completely wireless and is supplied with a base unit, which is powered by the vessel's 12Vsupply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to any compatible NMEA display unit. Wireless wind speed and direction data to any compatible NMEA display The masthead transmitter requires only occasional bright daylight falling on the solar panel to top up its internal battery. It will operate for 2000 hours without further solar charging from its fu lly charged battery. Easy insta ll ation with mast in place no wires to run down Simple masthead alignment through base unit Light weight - 190 grams Specifications: Sleep time > 15,000 Hours * Operating time > 2,000 Hours * Charging time < 150 Hours of bright daylight * Fully charged with no further daylight NMEA 0183 4800 Baud 0/P Level 0 to 12 volt from 220 ohm source resistance. NMEA data sentence MWV Supply voltage 6 to 16 volts. (Nominal 12 volts) Supply current 17mA Fuse 1 Amp. Display Wind speed and direction data to any compatible NMEA device The Clipper Wind Repeater disp lay is presented in the industry standard 11Omm square case. It boasts an exceptionally large and clear display with 60 segments for full 360 degree direction indication. Display Unit Spcifications Supply voltage Nomina l12V DC NMEA 0183 input sentence MWV 9 levels of display backlighting Display case size 110 x 11Omm Depth behind panel 30mm Consumption, 1OmA+ (1OmA for display illumination max) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NEW - The Log without a paddlewheel and no moving parts The Clipper EASYLOG shows speed, trip and total distance on a high visibility liquid crystal display. It utilises the RMC sentence from any GPS or plotter with an NMEA 0183 output. Alternatively the EASYLOG can repeat, using sentences VHW and VLW from an existing NMEA log. Technical Specifications: 40mm high characters Industry standard 110mm square case Speed in Knots with 0.1 knot resolution Trip in N.Miles with 0.1 N.Mile resolution Total Distance (N.miles/miles) Total log up to 9999 N.Miles 20 levels of backlighting Tactile keypad Speed trend indicator Current consumption 1.5mA at 12V (10mA with backlight) Opto isolated balanced NMEA input Includes Sun Cover This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Instrument Pod for 2 Clipper Instruments CLZ-POD Robust POD moulding to suit 2 x Clipper Cockpit display units. Suitable for open cockpit mounting.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Wireless Long-Range Repeater with Solar Power For those who wish to send weather data much farther than 1,000' (300M), the Wireless Long-Range Repeater can extend the range up to two miles (3.2 km). Please note: Use of this product requires a pair of external antennas, sold separately.The Long-Range Repeater has a transmitting and a receiving cable, each with an end which will connect to an external antenna. Choose either our large omni directional antenna (#7656), range 1,560' (476 m) in all directions, or our Yagi directional antenna (#7660), range 5,000' (1.5 km) in one direction. You'll need two antennas for each Long-Range Repeater. The charging system is capable of performing continuously even under low light conditions. Includes solar panel, regulator circuit, and rechargeable battery. Compatible with Vantage Pro2 and Vantage Vue only. Not compatible with original Vantage Pro.

Wireless Repeater with Solar Power For longer distances or to improve reception in troublesome areas, add one or more Wireless Repeaters. Transmitting and receiving range for each repeater is up to 1000' (300M) outdoors, line of sight; typical range through walls under most conditions is 200' to 400' (60 to 120M). Includes solar panel, regulator circuit, and rechargeable battery. Use up to eight repeaters with a single wireless station, or form a network of weather stations by linking eight repeaters to eight different wireless stations. Compatible with Vantage Pro2 and Vantage Vue only; not compatible with original Vantage Pro.

Omni Antenna for Long-Range Repeater Use with Long-Range Repeater to extend range up to 1,560' in all directions. Each repeater requires two antennas. You can combine omni and Yagi antennas to collect data from all directions and transmit in a single direction, or vice versa.Includes mounting hardware. NOTE: FCC regulations require that U.S. customers select either the Omni Antenna (#7656) or the Yagi Antenna (#7660); customers outside the U.S. must purchase third-party antennas in compliance with local regulations

Yagi Antenna for Long-Range Repeater Use with Long-Range Repeater (Davis 7654) to extend range up to 5,000' in one direction. Each repeater requires two antennas. You can combine one Omni and one Yagi antenna to collect data from all directions and transmit in a single direction, or vice versa. Includes mounting hardware. NOTE: FCC regulations require that U.S. customers select either the Omni Antenna (#7656) or the Yagi Antenna (#7660); customer outside the U.S. must purchase third-party antennas in compliance with local regulations

Tire Pressure Monitoring System - 4 Sensor & Repeater Package Monitor the air pressure and temperature of up to 22 tires in real-time with the iN•Command® Tire Pressure Monitoring System. The waterproof sensors use Bluetooth technology to communicate important safety information right to your smart device with the iN•Command TPMS App.  The repeater extends the Bluetooth signal for longer vehicle (up to 100 Meters or 300+ Feet) applications when mounted between the smartphone and rear tires.   Just open the Apple or Android App to assign a sensor to each tire by scanning the QR code with your device's camera to receive audible alerts and notifications. Features: Works with RVs, Trailers, Passenger Vehicles, and More Each Tire can be Monitored Individually for Pressure and Temperature (F° or C°) Ability to Monitor up to 22 Tires at Once w/ the iN-Command app Lets you Access Tire Pressure and Temperature History Free App is Available on Android and Apple Smartphones Pressure monitoring range: 0 to 185 PSI In the Box: Four (4) Bluetooth-Enabled Tire Pressure Monitoring Sensors w/ Locking Anti-Theft Bolts Four (4) 3V - CR1632 Batteries Bluetooth Repeater Installation Wrench Instruction Manual *Sold as an Individual

If you are looking for cockpit instruments that feature cutting edge technology yet are intuitively simple to operate, look no further. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case. Ease of use and display clarity were top of the design brief. All Clipper instruments have giant digits and multilevel backlighting. Technical Specifications: 40mm high digits Depth below transducer/below keel/below surface Deep and shallow alarms (audible and visual) User selectable feet or metres Intelligent gain control & manual override Selectable display rate and depth averaging rate Depth trend indicator High transmit power All settings stored in non-volatile memory Tactile keypad Complete with weather cover and transducer Consumption 20mA +25Ma for backlight (max)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.