|
Wind Repeater Display
Add or replace the display on the Clipper Wind V2 – 3 wire wind mast unit and the Clipper Wireless wind unit.
The Clipper Wind NMEA Repeater has user a selectable pointer style and selectable wind speed scale. It requires the standard NMEA 0183 MWV data sentence.
Technical Specifications:
Works with NMEA 0183 NMEA protocol
7 levels of display backlighting
Dimensions (H x W x D) - 4.33" x 4.33" x 1.18" (110 x 110 x 30mm)
In the Box:
16.5' (5 M) Cable
Mounting 'O' ring
Weather cover
*Sold as Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
115.70 |
|
|
Wireless Masthead & Data Box
The mast head transmitter is completely wireless and is supplied with a base unit, which is powered by the vessel's 12Vsupply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to any compatible NMEA display unit.
Wireless wind speed and direction data to any compatible NMEA display The masthead transmitter requires only occasional bright daylight falling on the solar panel to top up its internal battery. It will operate for 2000 hours without further solar charging from its fu lly charged battery.
Easy insta ll ation with mast in place no wires to run down
Simple masthead alignment through base unit
Light weight - 190 grams
Specifications:
Sleep time > 15,000 Hours *
Operating time > 2,000 Hours *
Charging time < 150 Hours of bright daylight
* Fully charged with no further daylight
NMEA 0183 4800 Baud
0/P Level 0 to 12 volt
from 220 ohm source resistance.
NMEA data sentence MWV
Supply voltage 6 to 16 volts. (Nominal 12 volts)
Supply current 17mA
Fuse 1 Amp.
Display
Wind speed and direction data to any compatible NMEA device
The Clipper Wind Repeater disp lay is presented in the industry standard 11Omm square case. It boasts an exceptionally large and clear display with 60 segments for full 360 degree direction indication.
Display Unit Spcifications
Supply voltage Nomina l12V DC
NMEA 0183 input sentence MWV
9 levels of display backlighting
Display case size 110 x 11Omm
Depth behind panel 30mm
Consumption, 1OmA+ (1OmA for display illumination max)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
532.49 |
|
|
The Clipper GPS repeater has quickly established itself as the market leader in cockpit GPS repeaters. Typical of the Clipper range it boats large clear digits and simple operation. Installation coundn't be simpler with just two wing nuts to fasten the unit into the panel ans two wires to connect to the GPS.
Technical Specifications:
Standard 110mm case
Super large high contrast LCD
Four instantly accessable display screens
Standard NMEA 0183 interface suits most
Complete with weather cover and 10 meters of cableThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
169.31 |
|
|
The Clipper Compass Repeater has all the features of the master unit and an independent off course alarm.
Steer to course function
When the steering function is selected a series of chevrons accumulate showing the magnitude and direction of the steering error. To stay on course simply turn the wheel in the direction of the chevrons until they are extinguished. The steering sensitivity can be preset by the user. An off course alarm provides a safety feature when not at the helm. If the heading deviates by more than a preset amount then the alarm will sound.
Technical Specifications:
Adjustable Damping
1 degree display resolution
Display case size 110 x 110mm
Depth behind panel 30mm
Complete with 5 meter cable, 'O' ring and weather cover
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
144.12 |
|
|
If you are looking for cockpit instruments that feature cutting edge technology yet are intuitively simple to operate, look no further. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case. Ease of use and display clarity were top of the design brief. All Clipper instruments have giant digits and multilevel backlighting.
Technical Specifications:
40mm high digits
Depth below transducer/below keel/below surface
Deep and shallow alarms (audio and visual)
User selectable feet or meters
Intellegent gain control & manual override
Selectable display rate and depth averaging rate
Depth trend indicator
No echo indicator
High transmit power
All settings stored in non volatile memory
Tactile keypad
Consumption 20mA + 25Ma for backlight (max)
***Note - this is not a stand alone unit and cannot be connected to a depth transducer. It must be connecetd to the Clipper Depth master display unit.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
115.70 |
|
|
The Clipper Wind system shares the same 110mm square case as its sister instruments in the Clipper range. the display is exceptionally large and clear, with 60 segments for full 360 degree direction indication. Windspeed is shown in knots, M.P.H. or Metres/second. The pointer style is selectable, from the single segment shown above, to multi segments for greater clarity or a 'windex' style indicator. The Masthead unit is well proven and supplied with 20 metres of cable as standard.
Technical Specifications:
Supply voltage Nominal 12v DC
Consumption, 50mA+ (25mA for display illumination max)
Keypad adjustment of masthead alignment
7 levels of display backlighting
Display case size 110 x 110 mm
Depth behind panel 30mm
Anemometer head 210 x 140mm
5 and 20 meter extension cables available
Compatible with Standard Horizon CP180 and CP300 plotters
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
355.72 |
|
|
The Clipper Log Repeater has its own independent alarm function as well as repeating all data from the master unit.
Technical Specifications:
40mm high digits
7 level display backlighting
Complete with 5 meter cable, 'O' ring and weather cover
Consumption 10mA + 25mA for display backlightThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
115.70 |
|
|
MeteoMan Barometer
The rate of change of barometric pressure and history of wind speed can be an invaluable indicator of imminent conditions.
Many sailors rely on low cost domestic barometers, which are inaccurate, have low resolution and very poor history. Several quality paper recording instruments exist but are delicate, fiddly to use and rely on paper which can jam when damp. The MeteoMan overcomes all these problems. It provides an accurate, high resolution barograph recording in excess of five days data on barometric pressure and wind speed. It is easy to use, reliable, rugged and draws very little power from the boat's battery.
The MeteoMan is available with an optional NMEA Wind sensor which provides wind direction, wind speed and external temperature. The Meteoman provides reliable meteorological information for the yachtsman. The main display shows the wind speed and direction, the ambient temperature and the barometric pressure.
To assist in predicting future trends the unit also displays a precision barograph and an anemograph showing barometric pressure and wind speed for the previous five days.
In addition to the meteorological functions the unit includes a marine chronometer, a stop watch, a race countdown timer, display of internal temperature and battery voltage.
MeteoMan can be connected to an NMEA Clipper Wind system where it will get wind speed/direction data via the Clipper wind output.
NMEA Wind Sensor supplied with mounting brackets and 20 metres of two core screened cable.
NMEA 0183 sentences: Wind speed/direction MWV Temperature XDR
MeteoMan specifications
Atmospheric pressure range
850 to 1100mb (user adjustment to compensate
for altitude)
Pressure history
Range 1 950 to 1050mb
Range 2 980 to 1030mb with 0.5mb resolution
Recording time
0 to 120 hours
0 to 60 hours
0 to 30 hours
Wind speed (when fitted with NMEA wind sensor)
Maximum speed 100 knots
Wind speed history
Range 1 0 to 100 knots
Range 2 0 to 50 knots
Range 3 0 to 25 knots
Recording time
0 to 120 hours
0 to 60 hours
0 to 30 hours
Wind direction (when fitted with NMEA wind sensor)
0 to 360 degrees (in relative mode)
Port 180 degrees to Starboard 180 degrees (innautical mode)
Displayed in analogue and digital format
Resolution 1 degree
Real time clock
12 or 24 hour format
Race countdown timer 10 and 5 minutes
Stop watch with split timing
Temperature
Outside temperature (when fitted with NMEA wind sensor)
Cabin temperature
Resolution 1 degree centigrade
Supply voltage
9.0 to 15.0 volts
The voltage is shown on the display with a resolution of 0.1 volts
Supply current
Operating current 100mA (when fitted with NMEA wind sensor)
Operating current 150mA (with backlight illuminated)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
204.59 |
|
|
Raymarine i70s Sailing System Pack, Wind, Depth, Speed
i70s Multi Display E70327
Maximum Visibility and Maximum Versatility
The i70s multifunction gives you the flexibility to display instrument and
navigation data that is most important to you. Equipped with a bold and
bright 4.1_ display, the i70s is easy-to-customize with digital, analogue
and graphical displays of depth, speed, wind and more. Add the i70s to your
existing Raymarine instrument system or create a network of i70s displays
and sensors, the choice is yours.
Features:
4.1" super bright oversized LCD for maximum visibility
All weather optically bonded display technology delivers brighter
colors, sharper contrast, and a wide viewing angle
Glass bridge industrial design compliments Raymarine eS and gS Series
multifunction displays
Simple user interface with sculpted rubber keypad for precise operation
in all conditions
Customizable data displays of depth, speed, wind and more
SeaTalkng networking for seamless connectivity to Raymarine systems and
NMEA2000* networks
NMEA2000 connectivity* for engine, environment fuel and navigation data
Convenient AIS repeater mode allows you to visually track nearby AIS
targets
Combine the i70s with the ITC-5 instrument transducer convertor and
connect to analog depth, speed, and wind sensors
Network the i70s with Airmar DST800 transducers and the new in-hull P70s
smart transducer
Supplied with both black (eS Series style) & (e Series style) gunmetal
bezels and protective suncover
*NMEA2000 certification pending. A DeviceNet to SeaTalknj adatop is required
for connecting the i70s to NMEA2000 backbone.
Intuitive LightHouse User Interface
The i70s places frequently used navigation functions right at your
fingertips. The LightHouse instrument interface is consistent with Raymarine
LightHouse multifunction displays, so Raymarine MFD users will feel right at
home with the i70s.
Networking
Raymarine i70s allows for connectivity to the following on board networks:
First generation SeaTalk networks using a SeaTalk to SeaTalkng
adapter cable
Current generation SeaTalkng networks
NMEA2000 networks using a SeaTalkng to DeviceNet adaptor
In addition to flexible networking capability the i70s features
user-selectable data sources, for integration with multi-sensor
networks.
AIS Repeater
Display AIS targets from NMEA 2000 AIS receivers. View the closest 25
AIS-equipped vessels and select individual targets to obtain vessel
information.
iTC5 Transducer Converter E70010
The iTC5 Instrument Transducer Converter enables the use of common analog
transducer signals with new digital instrument displays like Raymarine's i70
and ST70 Plus. The ultra-compact iTC5 has connections to host the five most
common analog transducers; depth, speed/temperature, wind, compass and
rudder. The iTC5 instantly converts these 5 analog signals to digital
SeaTalkng protocol.
In addition to providing analog-to-digital conversion, the iTC5 provides all
of the necessary power and communications connections to the transducers.
This greatly simplifies the installation of new systems, and also provides a
simple and cost-effective means for owners of older analog instrument
displays to upgrade to the latest digital display technology. The iTC5
eliminates the need for expensive "smart" transducers or individual
instrument pods. Complete control for calibration and alarms is performed
through the i70 or ST70 Plus instruments.
The iTC5 connects to Raymarine's SeaTalkng network and works with
most analog transducers from legacy Raymarine ST30, ST40, ST50, ST60, ST80
and ST290 series instruments. Additionally the iTC5 works with Raymarine
fluxgate compass modules as well as rotary and linear rudder feedback
transducers to support compass heading and rudder angle instruments.
Features:
All-in-one analog to digital converter for depth,
speed/temperature, wind, compass and rudder transducers
Outputs SeaTalkng and NMEA2000 data to digital instruments,
MFDs and more
Enables easy upgrade of legacy analog instrument displays without
replacing transducers
SeaTalkng network provides all necessary power and data
connections
Ideal for use with Raymarine i70 and ST70 Plus digital instrument
systems
Wind Vane E22078
Standard Forward Wind Transducer, Standard Length: 14 1/2" Includes 100ft. Cable.
DST800 Nylon Thru hull A22154
Raymarine DST800 Nylon Thru Hull Transducer with Depth, Speed, and Temp for
ST60, ITC-5
PACKAGE CONTAINS:
1ea E70327 i70s Instrument
1ea E70010 ITC-5
1ea A22154 DST800 Transducer
1ea E22078 Standard Wind Transducer
1ea A06031 Backbone Terminator
1ea A06074 Inline Terminator
1ea A06068 Backbone Cable 9M
1ea A06049 Power Cable
|
1373.68 |
|
|
i70s System Pack with Color Instrument & Wind, DST Transducers, iTC-5, 3M Backbone, T-Piece, Power & 2 Backbone Terminators
Instrument Data is Now Beautiful
Maximum Visibility and Maximum Versatility
The i70s multifunction gives you the flexibility to display instrument and navigation data that is most important to you. Equipped with a bold and bright 4.1” display the i70s is easy-to-customize with digital, analog and graphical displays of depth, speed, wind and more. Add the i70s to your existing Raymarine instrument system or create a network of i70s displays and sensors, the choice is yours.
Features:
4.1” super bright oversized LCD for maximum visibility
All weather optically bonded display technology delivers brighter colors, sharper contrast, and a wide viewing angle
New glass bridge industrial design compliments Raymarine eS and gS Series multifunction displays
Simple user interface with sculpted rubber keypad for precise operation in all conditions
Customizable data displays of depth, speed, wind and more
SeaTalkng networking for seamless connectivity to Raymarine systems and NMEA2000* networks
NMEA2000 connectivity* for engine, environment fuel and navigation data
Convenient AIS repeater mode allows you to visually track nearby AIS targets
Combine the i70s with the ITC-5 instrument transducer convertor and connect to analog depth, speed, and wind sensors
Network the i70s with Airmar DST800 transducers and the new in-hull P70s smart transducer
Supplied with both black (eS Series style) & (e Series style) gunmetal bezels and protective suncover
*NMEA2000 certification pending. A DeviceNet to SeaTalkng adaptor is required for connecting the i70s to NMEA2000 backbone.
Intuitive LightHouse User Interface
The i70s places frequently used navigation functions right at your fingertips. The LightHouse instrument interface is consistent with Raymarine LightHouse multifunction displays, so Raymarine MFD users will feel right at home with the i70s.
Networking
Raymarine i70s allows for connectivity to the following on board networks:
First generation SeaTalk networks using a SeaTalk to SeaTalkng adapter cable
Current generation SeaTalkng networks
NMEA2000 networks using a SeaTalkng to DeviceNet adaptor
In addition to flexible networking capability the i70s features user-selectable data sources, for integration with multi-sensor networks.
AIS Repeater
Display AIS targets from NMEA 2000 AIS receivers. View the closest 25 AIS-equipped vessels and select individual targets to obtain vessel information.
Transducer Connectivity
Pair i70s instruments with the innovative iTC-5 instrument transducer converter for seamless integration with analog depth, wind, speed, compass and rudder transducer. Alternatively, you can network the i70s to DST800 and p79s Airmar smart tranducers.
Customization
The Raymarine i70s instrument is easily customized to suit your personal boating requirements.
From traditional analog dials to engine information and tank levels, i70s has the capabilities to show it all.
Package Contains:
1ea E70327 i70s Instrument
1ea E70010 ITC-5
1ea A22154 DST800 Transducer
1ea E22078 Standard Wind Transducer
2ea A06031 Backbone Terminator
1ea A06064 5-Way Connector
1ea A06035 Backbone Cable 3M
1ea A06049 Power Cable
|
1373.68 |
|
|
i70s Multifunction Instrument Display
Maximum Visibility and Maximum Versatility
The i70s multifunction gives you the flexibility to display instrument and navigation data that is most important to you. Equipped with a bold and bright 4.1_ display, the i70s is easy-to-customize with digital, analogue and graphical displays of depth, speed, wind and more. Add the i70s to your existing Raymarine instrument system or create a network of i70s displays and sensors, the choice is yours.
Features:
4.1" super bright oversized LCD for maximum visibility
All weather optically bonded display technology delivers brighter colors, sharper contrast, and a wide viewing angle
Glass bridge industrial design compliments Raymarine eS and gS Series multifunction displays
Simple user interface with sculpted rubber keypad for precise operation in all conditions
Customizable data displays of depth, speed, wind and more
SeaTalkng networking for seamless connectivity to Raymarine systems and NMEA2000* networks
NMEA2000 connectivity* for engine, environment fuel and navigation data
Convenient AIS repeater mode allows you to visually track nearby AIS targets
Combine the i70s with the ITC-5 instrument transducer convertor and connect to analog depth, speed, and wind sensors
Network the i70s with Airmar DST800 transducers and the new in-hull P70s smart transducer
Supplied with both black (eS Series style) & (e Series style) gunmetal bezels and protective suncover
*NMEA2000 certification pending. A DeviceNet to SeaTalknj adatop is required for connecting the i70s to NMEA2000 backbone.
Intuitive LightHouse User Interface
The i70s places frequently used navigation functions right at your fingertips. The LightHouse instrument interface is consistent with Raymarine LightHouse multifunction displays, so Raymarine MFD users will feel right at home with the i70s.
Networking
Raymarine i70s allows for connectivity to the following on board networks:
First generation SeaTalk networks using a SeaTalk to SeaTalkng adapter cable
Current generation SeaTalkng networks
NMEA2000 networks using a SeaTalkng to DeviceNet adaptor
In addition to flexible networking capability the i70s features user-selectable data sources, for integration with multi-sensor networks.
AIS Repeater
Display AIS targets from NMEA 2000 AIS receivers. View the closest 25 AIS-equipped vessels and select individual targets to obtain vessel information.
Transducer Connectivity
Pair i70s instruments with the innovative iTC-5 instrument transducer converter for seamless integration with analogue depth, wind, speed, compass and rudder transducer. Alternatively, you can network the i70s to DST800 and p79s Airmar smart tranducers.
Customization
The Raymarine i70s instrument is easily customised to suit your personal boating requirements. From traditional analogue dials to engine information and tank levels, i70s has the capabilities to show it all.
|
535.48 |
|
|
Alpha 7 Performance Display
Alpha Performance Displays are the most versatile marine data displays. High-bright touchscreen instruments with wide view angles offer excellent visibility from anywhere onboard. Alpha's extensive data dashboard options and widgets make critical sailing, navigation, and engine data easy to interpret at a glance.
Alpha & Axiom Systems
Alpha Performance Displays are companion instruments for Raymarine Axiom chartplotters. A simple RayNet Ethernet cable between Axiom and the Alpha display gives Alpha access to Axiom's connected transducers and NMEA2000/SeaTalk NG devices.
Once paired with an Axiom network, users can customize and configure your Alpha display into a powerful performance sailing, navigation, and engine data instrument.
High Visibility
Polarized sunglass-friendly displays with extra wide viewing angles, viewable on the mast or remote location
Rugged Build
Tested to the extreme and built with our exclusive HydroToughTM nano-coating that repels water and oils for reliable touchscreen control
Fully Scaleable
A single power and data cable for fewer cables running through the deck and mast. Support for daisy-chaining up to 4 Alpha displays
Tactical Awareness
Intuitively designed graphical instrument displays, aimed at enhancing tactical awareness and facilitating better decision-making on the water.
SailPoint™ Target
SailPoint™ mode provides you with a visual reference of the target wind angle, so you achieve your maximum VMG upwind or downwind
Dynamic Wind
The dynamic wind performance display provides automatic zoom to the most critical part of the instrument display based on wind direction.
Other Features:
7 in. bright, high-contrast sailing instrument display
Power cables sold separately
What’s in the Box:
Alpha 7 performance display - 2 x mounting brackets
Suncover
Waterproof gasket
Documentation pack
4 x Threaded studs, M4 x 40 mm
4 x Thumb nuts
Physical Specifications:
Width: 120.1 mm (4.72 in.)
Height: 188.4 mm (7.42 in.)
Depth: 32 mm (1.26 in.)
Post Separation Distance: 5.71 mm (0.22 in)
Weight: 0.72 kg (1.59 lbs)
Power Specifications:
Nominal Supply Voltage: 12 V / 24 V dc
Operating Voltage Range: 10.8 V to 32 V dc
Current: 0.84 A (nominal) @ 12 V dc / 0.43 A (nominal) @ 24 V dc
Power Consumption: 10 W (maximum)
Inline Fuse Rating: 8 A
Thermal Breaker Rating: 8 A
Network Specifications:
Axiom: The Alpha Performance Displays require an Axiom Chartplotter in order to operate.
Data Connections: 1 x Daisy-chain connector & 1 x Power / RayNet Ethernet connector
Environmental Specifications:
Operating Temperature Range: -25°C to +55°C (-13°F to +131°F)
Storage Temperature Range: -30°C to +70°C (-22°F to +158°F)
Relative Humidity: 93% Max
Waterproof Rating: IPx6 and IPx7
Display Specifications:
Display Screen: 7 in. IPS TFT LCD
Brightness / Luminance: 1500 nits / 1500 cd/m2
Viewing Angles: Portrait — 85 + / 85 + & Landscape — 85 + / 85 +
Resolution: 1024 (H) x 600 (V)
PPI (Pixels Per Inch): 7 in. display — 170 PPI
Color: 24-bit color (16.7 million colors)
Refresh Rate: 60 Hz
Conformance:
Europe, Australia & New Zealand: EN 60945:2002
Canada: ICES-003
USA: CFR47 Part 15
Japan / China: IACS section E10
Product Markings
UKCA, CE, Australian Tick, WEEE Directive, Industry Canada
|
1439.99 |
|
|
Alpha 9 Performance Display
Alpha Performance Displays are the most versatile marine data displays. High-bright touchscreen instruments with wide view angles offer excellent visibility from anywhere onboard. Alpha's extensive data dashboard options and widgets make critical sailing, navigation, and engine data easy to interpret at a glance.
Alpha & Axiom Systems
Alpha Performance Displays are companion instruments for Raymarine Axiom chartplotters. A simple RayNet Ethernet cable between Axiom and the Alpha display gives Alpha access to Axiom's connected transducers and NMEA2000/SeaTalk NG devices.
Once paired with an Axiom network, users can customize and configure your Alpha display into a powerful performance sailing, navigation, and engine data instrument.
High Visibility
Polarized sunglass-friendly displays with extra wide viewing angles, viewable on the mast or remote location
Rugged Build
Tested to the extreme and built with our exclusive HydroToughTM nano-coating that repels water and oils for reliable touchscreen control
Fully Scaleable
A single power and data cable for fewer cables running through the deck and mast. Support for daisy-chaining up to 4 Alpha displays
Tactical Awareness
Intuitively designed graphical instrument displays, aimed at enhancing tactical awareness and facilitating better decision-making on the water.
SailPoint™ Target
SailPoint™ mode provides you with a visual reference of the target wind angle, so you achieve your maximum VMG upwind or downwind
Dynamic Wind
The dynamic wind performance display provides automatic zoom to the most critical part of the instrument display based on wind direction.
Other Features:
9 in. bright, high contrast sailing instrument display
Power cables sold separately
What’s in the Box:
Alpha 9 performance display - 2 x mounting brackets
Suncover
Waterproof gasket
Documentation pack
4 x Threaded studs, M4 x 40 mm
4 x Thumb nuts
Physical Specifications:
Width: 148.9 mm (5.86 in.)
Height: 235.9 mm (9.29 in.)
Depth: 34 mm (1.34 in.)
Post Separation Distance: 5.71 mm (0.22 in)
Weight: 1.18 kg (2.60 lbs)
Power Specifications:
Nominal Supply Voltage: 12 V / 24 V dc
Operating Voltage Range: 10.8 V to 32 V dc
Current: 1.02 A (nominal) @ 12 V dc / 0.52 A (nominal) @ 24 V dc
Power Consumption: 12 W (maximum)
Inline Fuse Rating: 8 A
Thermal Breaker Rating: 8 A
Network Specifications:
Axiom: The Alpha Performance Displays require an Axiom Chartplotter in order to operate.
Data Connections: 1 x Daisy-chain connector & 1 x Power / RayNet Ethernet connector
Environmental Specifications:
Operating Temperature Range: -25°C to +55°C (-13°F to +131°F)
Storage Temperature Range: -30°C to +70°C (-22°F to +158°F)
Relative Humidity: 93% Max
Waterproof Rating: IPx6 and IPx7
Display Specifications:
Display Screen: 9 in. IPS TFT LCD
Brightness / Luminance: 1500 nits / 1500 cd/m2
Viewing Angles: Portrait — 85 + / 85 + & Landscape — 85 + / 85 +
Resolution: 1280 (H) x 720 (V)
PPI (Pixels Per Inch): 9 in. display — 163 PPI
Color: 24-bit color (16.7 million colors)
Refresh Rate: 60 Hz
Conformance:
Europe, Australia & New Zealand: EN 60945:2002
Canada: ICES-003
USA: CFR47 Part 15
Japan / China: IACS section E10
Product Markings
UKCA, CE, Australian Tick, WEEE Directive, Industry Canada
|
2399.99 |
|
|
Wind Vane Kit Wireless Tactical for Version 2 - 3 Wire Units
Spare wind vane assembly with fixings and illustrated fitting instructions
For Clipper, Target, Cruiser and Wireless, Tactical masthead units.
Clipper / Target / Cruiser Version 2 – three wire / Wireless / Tactical mast unit.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
24.31 |
|
|
Wind Vane Kit
Spare wind vane assembly with fixings and illustrated fitting instructions for Clipper, Target and Cruiser masthead units with 5 wires.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
25.85 |
|