|
Raritan PHII PUMP Phii Pump Assy Complete
|
468.75 |
|
|
Check all of your impellers contained within the engine cooling pumps, bilge pumps, ballast pumps, and so on. One of the biggest contributors to impeller deterioration and damage is sitting idle in the same position for several months, so a proper check of the impeller(s) is vital to a reliable operation of the boat after storage and/or no operation.
Replacing an impeller is a fairly easy and straightforward process and one that you have probably done in the past. It is important to use the right tool to remove an impeller from the pump. Channel lock or needle-nose pliers are fine, but using an impeller removal tool is the best choice. Never use a screwdriver to pry an impeller out of a pump; you could accidentally score the bronze housing which can lead to leaks. Make sure you know how the impeller is being held in place. Some are sealed to the shaft with an O-ring; others are held in place with a set screw and others with a c-clip.
Make sure to check the pump and the water lines for any trash or chunks of rubber that may have broken off from the impeller. Even the smallest blockage can cause major engine cooling and overheating issues. Also, remember to properly lubricate your new impeller with Vaseline or the lubricant included with the new impeller. This will reduce friction for a brand new impeller on a dry startup.
Most importantly, make sure you are using the right impeller for the application. We have seen many instances of people who have replaced an impeller with something that is close to the original, but not exactly right, and this can cause major problems for the engine once normal operation resumes. You cannot match the size of the used impeller to a new one to determine the replacement, as a used impeller can be swollen and disfigured from its original specifications. The best method is to obtain the impeller number off of the impeller itself, usually located on the edge of the shaft hole of the impeller, or obtain the part number of the pump, usually stamped into the bronze housing.
You can find just about every impeller that needs to be replaced at CLR Marine. We carry Sherwood, Jabsco and Globe just to mention a few. We also carry many of the miner and major rebuild kits for many pumps. A minor repair kit consists of the impeller and any gaskets or O-rings that may be needed to replace the impeller. Our major rebuild kits include everything to rebuild that pump except for the shaft. All kits are put together at time of order so you will always see the Quantity on Hand as 0.
|
|
|
TZ Professional Additional Work Station - Digital Download
This is a digital download, please include your existing TZ Professional serial number along with your email address and the new unlock code will be sent via email.
Whether for Commercial Fishing or for a Workboat TZ Professional version 3 is the latest version of our marine navigation software and the one sole product that suits all the needs of professionals at sea. Close to 25,000 vessels currently use our TIMEZERO software. This version offers an incredible amount of features specifically designed for both professional fishermen and workboats.
Optional PBG module
The latest version of the PBG module will allow you to create charts of the seafloor even clearer and more realistic. The 2D and 3D imaging will now have customizable color coding scales which will allow for instantaneous precision research.The 3D view will make visualization of data even more simple and intuitive.
Optional Profile window, is a remarkable tool!
Instantaneously display a point to point depth profile window. This 2D view will allow you to identify the depth variations with unequalled precision (rocks, shipwrecks, etc.).
Fishing Workspace
A workspace exclusively dedicated for professional fishermen will allow for personalization of 2D/3D so accessing information that is most pertinent is shown first.Workboats
Compatibility with S57/S63 charts
Keeping up to date charts is an essential element to ensure the safety of all those at sea. TZ Professional is now compatible with the official S57/S63 formats.The official S57/S63 charts are updated every week. These maps respect the S52 standard developed by the International Maritime Organization (IMO). The iconography offers a simplified display in order to improve the readability of the marine charts on screens.
Advanced Route Management
Route Planning is of the utmost importance for all professions at sea.Our new technology assures the security of a route upon creation: Through color codes (green/red) it is instantaneously possible to know if the depth is sufficient for the safe passing of your boat. An automatic route wizard will provide you with information regarding to the optimal departure and arrival time, taking into account tides and currents.
AIS Features
The configuration of AIS can sometimes prove to be complex. Our new AIS module allows for complete configuration of all information directly within TZ Professional (Status, Destination, etc.). Furthermore, it is now possible to receive and send AIS text messages from TZ Professional. This system will allow for simplified communication, free and individual with all boats which are equipped with AIS.
Security Cone
The new security cone is a feature in adherence with the official rules of the IMO. It takes into account the information of vector charts in order to detect isolated dangers and shallow areas. If an obstacle is detected inside this cone in front of the boats trajectory, an anti-grounding alarm will automatically be triggered.
Optional Voyage Data Recorder Module
This new module that comes as an option, offers the possibility to save all the information received from the connected sensors to TZ Professional (GPS, radar, AIS, etc.). It is particularly useful in the case of an incident as it allows one to look back at all the available information relative to the surrounding environment of the boat at that given date and time.
System Requirements:
Microsoft Windows 7 SP1, Windows 8.1 or Windows 10
CPU 2 GHz
4GB of RAM
Video Board:
Minimum - Integrated Intel Graphic Chipset (i5 4th generation with HD4400 or above)
Recommended - (for PBG and Multi monitor) Dedicated Video Board with 1GB VRAM
Screen Resolution: 1024 X 600 or higher
Hard Disk: 20 GB of free memory
USB or Serial Port for connecting instruments or Serial Port for connecting instruments 100 Base-T Network Adapter for Furuno Ethernet Sensors
|
1020.00 |
|
|
Flotec N76-46P Pump Body
This is the durable plastic pump body, that is specially designed for use with Flotec shallow well jet pumps.
Replacement pump body N76-46P covers the pump impeller and directs water flow through the pump. This part replaces a worn or damaged body to restore proper pumping.
The Flotec, Simer and Sta-Rite pumps have interchangeable parts. If the part number is the same, it will work in any of the Flotec, Simer and Sta-Rite pumps.
|
122.85 |
|
|
Jabsco 18610-0271 Flexible Impeller Utility Pump
FEATURES
Pump Body: Bronze
Port Size: 1/2" NPT Female. Includes Two 3/4" Male Garden Hose Adapters.
Flow: 6.0 GPM at 10 feet of head
Pressure: to 17.3 PSI
Impeller: Neoprene
Shaft Seal: Lip Type
Shaft: Stainless Steel
Motor: 1/4hp - 115 Vac, 60 Hz. TENV Motor
Thermal Overload Protector Stainless Steel Shaft 8' Cord with 3 Prong Grounded Plug
APPLICATIONS
INDUSTRIAL: Circulating and transferring, velocitymixing, pumping machine tool coolants, return spill, sump drainage, pharmaceuticals, soap, liquors, ink, dyes, alcohol, glycerine, brine and pumping water for cooling heliarc welding equipment
FARMING: Pumping water for stock, pumping water from shallow wells and cisterns
MARINE: Washdowns, utility dock side pump
PLUMBING & HOME EMERGENCY USE: Pumping out flooded basements, cesspools, sumps, water heaters and water closets, drains and sinks, draining fishponds and small pools
PUBLIC UTILITIES AND MUNICIPALITIES: De-watering and draining meter boxes and excavations, dust control and sampling.
NOTE: In stock shows 0, these are put together at time of order.
|
813.66 |
|
|
Micropump GA-T23.J9FS.A Pump Head A Mount
The GA Series high-performance pumps provide precise and pulseless flows. Featuring Micropump's suction-shoe design, GA Series pumps self-compensate for wear, ensuring near zero slip and a longer pump life. Pumps are available in a wide range of materials and configurations.
Feature:
Small Size
Smooth, Pulseless Delivery
Chemically Resistant
Easy to Service
Proven Reliability
Advanced Pump Technology
Wide Range of Options
OEM Configurations
Enhanced Efficiency
Pump Series: GA Series
Ports/Fittings: 1/8-27 (F) NPT Side Ports
Min Speed (RPM): 500
Max Speed (RPM): 5500
Max Pressure (psi): 300
Min Temperature (°C): -46
Max Temperature (°C): 177
Max Diff. Pressure (psi): 75
Displacement (ml/rev): 0.092
Design: Standard Design
Gear Set: 0.125/2/40 (0.092 ml/rev)
Gear Material: PEEK (hex drive)
Static Seals: PTFE
Base Materials: 316SS
Drive Mount: MP Housing
Bypass: No
Driven: Ferrite
Driving Magnet: Not Included
High System Pressure: No
Bushings: None
Shafts: 316SS
Gear TrimNone
Model: GA-T23.J9FS.A
|
1147.03 |
|
|
Oberdorfer Cent Pump Ped Mnt 3/4 X 1/2
Ag Pump for Heat and Humidity Control
Oberdorfer Ag pumps are the right product for the job. Our Ag pumps can pump fuel oil to the oil burner and heat water. Water Is heated to approximately 120 degrees Fahrenheit, and sprayed into the cotton batt, making it suitable for any need. Your company’s processing, bailing, and shipping efforts will be much more efficient after being outfitted with these hard working ag pumps.
Max Flow 25 GPM
Max Pressure 29 PSI
Rugged Bronze Construction
Quiet Operation
O-Ring Housing seal eliminates gasket problems
Mechanical Seal - Carbon/Ceramic, Nitrile - standard, Fluoroelastomer (S10) or Polytetrafluoroethylene (PTFE) (S11) - options
Designed for Pulley Drive
Heavy Duty Integral Steel Shaft and Ball Bearings
Handles Contaminated Liquids
No bearing lubrication required
|
674.06 |
|
|
Jabsco 12210-0003 Pump 115V Motor
Pump Body: Bronze
Port Size: 3/8" NPT Internal Pipe Thread and Adaptors for 3/4" garden hose thread
Flow: 3.4 GPM at 10ft
Pressure: 17.4 PSI Max
Impeller: Neoprene or Nitrile
Shaft Seal: Lip Type
Motor: 115 Volt AC Intermittent duty with Replaceable Brushes, Stainless Steel Shaft, 6' cord, three prong grounding plug
APPLICATIONS
The 12210-Series Pumps are the most compact self-priming flexible impeller 115 Volt AC Utility Pumps Jabsco offers.
INDUSTRIAL: Transferring liquids. Velocity-mixing. Pumping coolants. Pumping waste water to sewer. Cellar, yard and sump drainage. Cooling Heliarc welding equipment.
MARINE: Washing down decks and docks. Water for ship's service supply. Pumping out crank-case oil.
FARMING: Pumping water for stock, poultry houses, farmhouse. Pumping water from wells and cisterns. Pumping liquid ballast into tractor tires. Pumping water from flooded basements.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, cesspools, sumps, etc. Draining water heaters and water closets. Draining laundry tubs below sewer level. Removing water trapped between walls, draining inaccessible places when pipes break or leak. Draining fishing ponds and garden pools. Removing sludge, lye water and other caustics from stopped up drains and sinks.
Jabsco Flexible Impeller Utility Pump 115V 3.4GPM Nitrile Impeller
|
510.49 |
|
|
Flotec FPDMP21SA Drill Pump for Water Removal - 225 GPH
Thermoplastic drill pump works with electric drills. Ideal to pump water or change oil with your electric drill as a power source.
FEATURES
Multi-purpose pump
Maximum pumping capacities up to 225 GPH
Minimum drill speed 1200 RPM
|
14.70 |
|
|
500GPH Electronic Sensing Bilge Pump - 12V
In the next generation sensing bilge pumps, the 500GPH S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes.
Water is kept in check between 1/8" and 3/8"!!! Great idea when power conservation is needed and as an added benefit, no float switch is needed!
All that plus the added benefits of our standard bilge pump:
Check valve included with hidden air vent to prevent airlocking
True electromagnetic suppression (EMC)
A built-in thermal cell that protects the pump and the vessel when things get too hot
These are the smallest automatic pumps available on the market!!!
Features:
Completely automatic with manual override - No Float Switch Needed!
Submersible and Ignition Protected
High efficiency, low amp motor
Stainless-steel shaft
Includes backflow preventer
WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
86.78 |
|
|
500GPH Electronic Sensing Bilge Pump - 24V
In the next generation sensing bilge pumps, the 500GPH 24V S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes.
Water is kept in check between 1/8" and 3/8"!!! Great idea when power conservation is needed and as an added benefit, no float switch is needed!
All that plus the added benefits of our standard bilge pump:
Check valve included with hidden air vent to prevent airlocking
True electromagnetic suppression (EMC)
A built-in thermal cell that protects the pump and the vessel when things get too hot
These are the smallest automatic pumps available on the market!!!
Features:
Completely automatic with manual override - No Float Switch Needed!
Submersible and Ignition Protected
High efficiency, low amp motor
Stainless-steel shaft
Includes backflow preventer
WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
93.54 |
|
|
800GPH Electronic Sensing Bilge Pump - 12V
In the next generation sensing bilge pumps, the 800GPH 12V S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes.
Water is kept in check between 1/8" and 3/8"!!! Great idea when power conservation is needed and as an added benefit, no float switch is needed!
All that plus the added benefits of our standard bilge pump:
Check valve included with hidden air vent to prevent airlocking
True electromagnetic suppression (EMC)
A built-in thermal cell that protects the pump and the vessel when things get too hot
These are the smallest automatic pumps available on the market!!!
Features:
Completely automatic with manual override - No Float Switch Needed!
Submersible and Ignition Protected
High efficiency, low amp motor
Stainless-steel shaft
Includes backflow preventer
WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
107.23 |
|
|
1100GPH Electronic Sensing Bilge Pump - 12V
In the next generation sensing bilge pumps, the 1100GPH 12V S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes.
Water is kept in check between 1/8" and 3/8"!!! Great idea when power conservation is needed and as an added benefit, no float switch is needed!
All that plus the added benefits of our standard bilge pump:
Check valve included with hidden air vent to prevent airlocking
True electromagnetic suppression (EMC)
A built-in thermal cell that protects the pump and the vessel when things get too hot
These are the smallest automatic pumps available on the market!!!
Features:
Completely automatic with manual override - No Float Switch Needed!
Submersible and Ignition Protected
High efficiency, low amp motor
Stainless-steel shaft
Includes backflow preventer
WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
131.83 |
|
|
Jabsco 11870-0007 Electric Clutch Pump 32V
Pump Body: Bronze
Port Size: 1-1/4" NPT Internal
Electric: 32V
Pulley: Single B groove or Double A groove
Impeller: Nitrile
Shaft Seal: Mechanical Carbon-Ceramic, Face Type
Shaft: Stainless Steel
Bearings: Shielded Ball Bearings
APPLICATIONS
This electrically activated clutch pump offers all the benefits of flexible impeller pumps with a substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation.
MARINE: Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock-side pump.
INDUSTRIAL: Circulating and transferring, Velocity mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning Liquors, Glycerine, Brine, etc.
FARMING: Pumping water stock, Pumping water from shallow wells and cisterns.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.
PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for draining meter boxes, manholes, excavations; For pollution control and watering for dust control.
Jabsco Electric Clutch Pump 32V, 1-1/4" NPT Ports, Double "A" Groove Pulley
|
1569.71 |
|
|
Jabsco 23670 Series Junior Puppy Flexible Impeller Pump
FEATURES
Pump Body:
Bronze
Port Size:
3/8"BSP Threads or 3/4" (19mm) ID Hose.
Flow:
15.5 Litres/min (3.4 USgallons/min)
Impeller:
Nitrile
Shaft Seal:
Lip Type
Shaft:
Stainless Steel
Motor:
Continuous duty 12V or 24V. Motor meets ISO 8846 MARINE (Ignition protection) and ISO 8849 MARINE (Bilge pump standard).
APPLICATIONS / CHARACTERISTICS
Continuous rated, medium duty flexible impeller pumps for bilge and general purpose use.
Self Priming to 8 feet (2.5m).
Small bilge debris present no problem to these bronze bodied, flexible impeller pumps. Simple design means fewer wearing parts. Use for bilge pumping, livewell circulation, washdown and general pumping requirements
Jabsco Junior Puppy Flexible Impeller Pump 12Volt, 3.4GPM, 3/8" British Standard Pipe Threads or 3/4" Hose Ports, Nitrile Impeller
|
521.94 |
|