Hatch Handle Latch - 3-1/8" x 2-11/16" Constructed of sand cast brass with a chrome plated finish. These Hatch Handle Latches are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Adjustable locking arm adds additional security. Installs with four #8 FH fasteners (not included). Once installed, the locking arm can be trimmed to length. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Hatch Handle Latch - 3-3/4" x 3"  Constructed of sand cast brass with a chrome plated finish. These Hatch Handle Latches are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Adjustable locking arm adds additional security. Installs with four #8 FH fasteners (not included). Once installed, the locking arm can be trimmed to length. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Zinc U-Bolt 7/16"-14 X 3-1/8" X 4" with Washers & Nuts - Square Zinc-plated u-bolt for mounting brackets & accessories to trailer frames. Features: Square bend Grade 5 7/16"-14 diameter/thread 3-1/8" W x 4" L *Comes packaged with nuts and washers.

Zinc U-Bolt 7/16"-14 X 3-1/8" X 3" with Washers & Nuts - Square Zinc-plated u-bolt for mounting brackets & accessories to trailer frames. Features: Square bend Grade 5 7/16"-14 diameter/thread 3-1/8" W x 3" L *Comes packaged with nuts and washers.

Take-Apart Hinge Allows engine boxes, hatches, etc. to be easily removed, or laid back completely when open for full access. Size:3-7/8" x 2-1/16" Fastener: #10(4) Material: Chrome Plated Brass

Description: 316 S.S. Hinged Chain & Rope Deck Pipe Inside diameter - 3-7/8" x 2-1/2" Flange - 4-1/8" x 2-7/8" Fastener - #12(4) Max. Rope Diameter - 1-1/4" Slide top to right to lock into place.

Description: 316 S.S. Chain Stopper Dimensions: L: 3-1/8" W: 2-1/2"

Cast Stainless Steel Handle/Latch - 3-3/4" x 3" The Hatch Handle Latches feature a handle that pivots out to open hatches and lays flush when not in use for a clean appearance. Ideal for use on doors, hatches, lazarettes, and dock boxes. Adjustable locking arm adds additional security. Once installed, the locking arm can be trimmed to length. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four #8 FH fasteners (not included).

T-Handle Latch  Investment cast 316 stainless steel construction for corrosion resistance and durability. This latch features a recessed T-handle for a flush, clean installation. Installs with four #8 FH fasteners (not included).

March MDX-3 5/8 Pump 115V Motor 5/8" Ports

Door Handle Latch - Locking - Investment Cast 316 Stainless Steel This Locking Door Handle Latch is highly polished for a modern, sleek look. Features open from outside deadbolt with cylinder lock mechanism. Includes strike plate, mounting template and two keys. For doors 3/4” – 1-1/2” thick. Constructed of corrosion resistant investment cast 316 stainless steel. Latch and strike plate install with four #8 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Solid Braid Polyester Cord Hank - 1/8" x 50' - White Utility Cordage Features: Solid braid polyester cord Mildew and rot resistant Excellent for many quick tie and flag halyard applications

ALTUS Ventilation Hatch - OD 13-1/8" x 13-1/8" ALTUS is made of a sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of 3/8” (10 mm) and is ‘dark smoke’ colored. These hatches come with adjusters which are stylish and easy to operate, allowing the lid to be held open at almost any angle up to 90º. Type ALTUS can be fitted on the deck and opened from the inside or outside. It has a ventilation position and can be locked completely watertight. They are CE-classified AII, which means to say that they are designed for ocean use and can be fitted on deck. These hatches are provided with carefully designed hatch adjusters, which are both stylish and easy to operate. Like other VETUS hatches, the ALTUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position. The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”. An aluminum counter flange and a mosquito screen are available for these hatches. Features: External Dimensions -  13 1/8" x 13 1/8" Cut Out Dimensions - 10 1/4" x 10 1/4"  Number of Handles - 1 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Stainless Steel Louvered Vent - 9-1/8" x 4-5/8"  Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.

Stainless Steel Louvered Vent - Oval - 9-1/8" x 4-5/8"  Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.