3 Blade aluminum propeller for Honda 75-130 horsepower engines and Nissan/Tohatsu 60-90 horsepower engines. Both with 15 tooth spline and thru hub exhaust. 4-1/4" gearcase.

Snap Gate Hook - Body Only - 1/4" - 28 Left Hand For those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook.  Specifications: 1/4"-28 LH

MAGNUS Escape Hatch - OD 26-3/4" x 26-3/4" Heavy Duty Ocean Hatch MAGNUS is a complete range of extra heavy-duty hatches. They are CE-classified AI, which means to say that they are designed for ocean use and can be fitted in any part of the hull or deck. These hatches are provided with friction hinges, which will keep the hatch open in any position, without the need for stays. The hatch can be opened through 180° and there are virtually no obstructions in the hatch opening. Like other VETUS hatches, the MAGNUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position. The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”. The build-in dimensions (the cut-out sizes) of the Magnus hatches are in conformity which those that are currently in the market. Features: External Dimensions -  26 3/4" x 26 3/4" Cut Out Dimensions - 24 11/16" x 24 11/16" Number of Handles - 4  *VETUS strongly advises against using MAGNUS hatches as an A1 escape hatch in the underside of a multihull. Due to the flexible nature of these types of vessels, water tightness cannot be guaranteed unless the hatch is installed on a flat and inflexible structure. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame

3 Blade aluminum propeller for Honda 75-130 horsepower engines and Nissan/Tohatsu 60-90 horsepower engines. Both with 15 tooth spline and thru hub exhaust. 4-1/4" gearcase.

3 Blade stainless propeller for 40-140 horsepower outboard and 1.6L-3.0L sterndive engines with 4-1/4" large Gearcase, 13 tooth spline and thru hub exhaust.

3 Blade stainless propeller for Honda 75-130HP engines and Nissan/Tohatsu 60-90HP. Both with 15 tooth spline and thru hub exhaust. 4-1/4" gearcase.

3 Blade stainless propeller for Honda 75-130HP engines and Nissan/Tohatsu 60-90HP. Both with 15 tooth spline and thru hub exhaust. 4-1/4" gearcase.

3/4" x 25' Nylon Double Braid Dock Line - Grey  Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque-balanced construction, and a unique stabilization process, which produces this long-wearing line that resists kinking. Applications: Dock line - ≤55' (16.8 M) vessel Mooring line - ≤ 30' (9.1 M) vessel  Technical Specifications: Color: Grey Material: Double braid nylon  Rope Diameter: 3/4"  Rope Length: 25' Tensile Strength: 13,100 lb *Sold as an Individual

3/4" x 35' Nylon Double Braid Dock Line - Grey  Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque-balanced construction, and a unique stabilization process, which produces this long-wearing line that resists kinking. Applications: Dock line - ≤55' (16.8 M) vessel Mooring line - ≤ 30' (9.1 M) vessel  Technical Specifications: Color: Grey Material: Double braid nylon  Rope Diameter: 3/4"  Rope Length: 35' Tensile Strength: 13,100 lb *Sold as an Individual

Oberdorfer Cent Pump Ped Mnt 3/4 X 1/2 Ag Pump for Heat and Humidity Control Oberdorfer Ag pumps are the right product for the job. Our Ag pumps can pump fuel oil to the oil burner and heat water. Water Is heated to approximately 120 degrees Fahrenheit, and sprayed into the cotton batt, making it suitable for any need. Your company’s processing, bailing, and shipping efforts will be much more efficient after being outfitted with these hard working ag pumps.   Max Flow 25 GPM   Max Pressure 29 PSI   Rugged Bronze Construction Quiet Operation O-Ring Housing seal eliminates gasket problems Mechanical Seal - Carbon/Ceramic, Nitrile - standard, Fluoroelastomer (S10) or Polytetrafluoroethylene (PTFE) (S11) - options Designed for Pulley Drive Heavy Duty Integral Steel Shaft and Ball Bearings Handles Contaminated Liquids No bearing lubrication required

Oberdorfer Cent Pump Ped 3/4 X 1/2 FEATURES Pump Body: Bronze Ports: Inlet: 3/4" NPT, Outlet: 1/2" NPT Flow: 24 GPM Max Pressure: 23 PSI Max, 53 feet of head Impeller: Centrifugal Shaft Seal: Mechanical seal carbon/ceramic Buna Standard, Viton or Teflon Optional Shaft: Heavy Duty Integral Steel Shaft and Ball Bearings Motor / Drive: Designed for Pulley Drive.   BRONZE CENTRIFUGAL PEDESTAL PUMPS   The special pump alloys used provide corrosion resistance to many liquids including water, water solutions, and a wide range of commercial chemicals. Rugged bronze construction. A standard in the marine air conditioning, industry, and agriculture. Extremely quiet operation. O-ring housing seal eliminates gasket problems. Handles contaminated liquids. Discharge port orientation flexibility 8 positions. The 60P centrifugal pump has an external ball bearing isolated from the liquid being pumped. The ball bearing is greased and sealed for life, requiring no maintenance.

Hatch Handle Latch - 3-3/4" x 3"  Constructed of sand cast brass with a chrome plated finish. These Hatch Handle Latches are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Adjustable locking arm adds additional security. Installs with four #8 FH fasteners (not included). Once installed, the locking arm can be trimmed to length. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Cast Stainless Steel Handle/Latch - 3-3/4" x 3" The Hatch Handle Latches feature a handle that pivots out to open hatches and lays flush when not in use for a clean appearance. Ideal for use on doors, hatches, lazarettes, and dock boxes. Adjustable locking arm adds additional security. Once installed, the locking arm can be trimmed to length. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four #8 FH fasteners (not included).

3 Blade stainless propeller for 150-300 horsepower engines with 15 tooth spline and thru hub exhaust. 4-3/4" Gear Case.