13mm High-Load Trolley with 2X M4 Tapped Holes This trolley features recirculating ball bearings housed in strong, lightweight, corrosion-resistant aluminum for dependable, low-friction linear travel. Use for moving loads and equipment, hoisting, and moving stage equipment, and architectural solutions. Features: High-load trolley with two M4-tapped holes on top Torlon® ball bearings handle high loads, reducing friction so the trolley moves smoothly along the rail Retaining clips keep ball bearings captive when the trolleys are removed for maintenance Specifications: Length (mm): 56 mm Length (in): 2-3/16 in Width (mm): 40 mm Width (in): 1-9/16 in Weight (g): 57 g Maximum Rated Load (kN): 1.4 kN Height (mm): 19 mm Height (in): 3/4 in Weight (oz): 2.01 oz Breaking Load (kN): 6.7 kN

8mm High Resistance "D" Shackle Forged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter. High-Resistance (HR) shackles are forged in 17-4PH stainless steel to handle high loads. They have an "HR" imprint for easy identification. Specifications: Shackle pin: 8mm / 5/16in Weight: 56.5g / 2oz Maximum working load: 2330kg / 5130lb Breaking load: 4650kg / 10260lb

Series 50 High Load Block - Single - Universal Head Ideal for high load applications. Wear resistant sheave material, in lightweight, self lubricating polymer, is suitable for use with rope or wire.Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required. Features: Exceptionally high working loads Lightweight Cheek cut-outs for easy bearing maintenance Suitable for both rope or wire Captive Lock™ universal head Slotted pin shackle eliminates fouled lines Applications: Mainsheet Spinnaker sheets Halyards and other primary applications on boats up to 10M(33') Materials: Nylatron® sheave Grade 316 stainless steel load strap and head fitting Impact and U.V. resistant, fiber reinforced Nylon cheeks Specifications: Sheave Ø: 50mm(2") Max. Rope Ø: 12mm(1/2") Max. Cable Ø:5mm(3/16") Max. Pin Ø: 5mm(3/16") M.W.L.: 800kg(1,760lbs) B. L.: 1,500kg(3,310lbs) Weight: 117g(4.1oz)

Series 40 High Load Block - Single Features: Exceptionally high working loads Lightweight Cheek cut-outs for easy bearing maintenance Suitable for both rope or wire Captive Lock™ universal head Slotted pin shackle eliminates fouled lines Ideal for high load applications. Wear resistant sheave material, in lightweight, self lubricating polymer, is suitable for use with rope or wire.Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required Applications: Halyards Backstays Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8m (26ft) Materials: Nylatron® sheave Grade 316 stainless steel load strap and head fitting Impact and U.V. resistant, fiber reinforced Nylon cheeks

Series 30 High Load Exit Box for Single Rope or Wire Plain bearing sheaves are ideal for halyards and other applications where high static loads are likely to be encountered Applications: Ideal applications where lines (rope or wire) need to be led through decks, bulkheads or spars minimizing friction and chafing Materials: Nylatron&regl sheave Grade 316 Stainless Steel cheeks Specifications: Sheave Ø: 30.0mm(1-3/16") Max. Rope Ø:8.0mm(5/16") Max. Cable Ø: 4.0mm(5/32") B.L.: 800kg(1,760lbs)

Series 40 High Load Exit Box for Single Rope or Wire Plain bearing sheaves are ideal for halyards and other applications where high static loads are likely to be encountered Applications: Ideal applications where lines (rope or wire) need to be led through decks, bulkheads or spars minimizing friction and chafing Materials: Nylatron&regl sheave Grade 316 Stainless Steel cheeks Specifications: Sheave Ø: 40.0mm(1-9/16") Max. Rope Ø:10.0mm(3/8") Max. Cable Ø: 5.0mm(3/16") B.L.: 1,000kg(2,200lbs)

Series 20 BB Block Single Becket Option Lashing High Load Features: Suits up to 4mm (5/32”) lashing Supplied with 750mm (30”) x 2mm (3/32”) diameter, Dyneema® single braid lashing line

Roper Pump 2835M High Viscous Pump W/Rv Roper's 2835 rotary pump is built for pumping highly viscous, molasses-based liquid feed supplements.  

High Performance Cylinder w/Straight Arm for SilverSteer V1 Specially designed for high performance, high torque applications, the SilverSteer™ UC128 SVS cylinder is recommended for bass boats, flats boats and tournament fishing boats.  Compatible with competing helms, hoses and oil, the UC128-SVS is built to last with heavy duty stainless steel cylinder rod, seals and link assemblies.  Simple to install and fits almost every 2 and 4 stroke outboard engine in the market.

Deluxe Anchor Trolley with Pulleys The Deluxe Anchor Trolley will help users stop being victims of changing winds and currents while fishing in an anchored position. The YakGear Deluxe Anchor Trolley Kit allows the deployment of any anchor, drift chute, or stake-out pole before judging the current and wind while still remaining in a favorable fishing position. Without a trolley, users are limited to anchoring where it is reachable, causing the boat to swing back and forth. Mounted just off of the gunwale of any kayak or canoe, the deluxe trolley kit uses a nylon pulley system to select a desirable position anywhere from bow to stern, then maintains the positioning through the use of a 2-5/16-inch mini zig-zag cleat. The deluxe system uses Harken pulleys to seamlessly pass trolley rope from bow to stern without the standard rubbing of rope along slightly less smooth pad eyes. The mounted pulleys are raised off of the boat enough to eliminate any unnecessary rubbing or scratching of the boat.  As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone and anchors are recommended but not included. Features: Deluxe anchor trolley system with Harken pulleys It allows the bow of your vessel to turn into the current for a smoother experience A mini zig-zag cleat is included, assisting in maintaining stable positioning Installation instructions and hardware are included The kit also includes 30 ft. of rope 1-year warranty

13mm Low Beam Track - 2M This track is extruded from high-grade 6061-T6 aluminum and hard coat-anodized for a hard, long-lasting surface. Specifications: Weight (g): 429 g Weight (oz): 15.1 oz Mounting Hole Spacing (mm): 50 mm Mounting Hole Spacing (in): 1-31/32 in Fasteners (mm): 4 FH mm Fasteners (in): #8 FH in Minimum Curved Track Radius (m): 1.52 m Minimum Curved Track Radius (ft): 5 ft Length (m): 2 m Length (ft in): 6' 7" ft in Line Shedding Endstop: 2706 Splice Link: 2711

1 Ton Twing Block The Twing block features a spring-loaded side opening mechanism for true one-handed rigging, even while wearing sailing gloves. Black anodized aluminum sideplates are edged with robust bumpers to protect the block, topsides, and deck. The sheave is aluminum rolling on a bearing system shared with Harken's existing 2.3T high-load snatch block.  Features: Side opening side plate - Easy to rig and remove from sheet Spring loaded button release - Quick one-handed rigging Anti-capsize bar - Keeps sheave aligned on sheet ULC main bearing - Sheave turns smoothly under extreme loading Sideload balls - Carry loads especially when the block is not aligned in light air Thimble at pivot base - Use 1:1 or 2:1 up-down control Machined aluminum inner sideplates - High strength, low weight Soft polyurethane outer side plate bumpers - Protects block and deck Uses: Twing, tweaker control for code zero sheets Can be used as a snatch block when combined with a soft shackle Spinnaker sheet and guy control Specifications: Sheave Ø (mm): 38.5 mm Sheave Ø (in): 1-1/2 in Maximum line Ø (mm): 11 mm Maximum line Ø (in): .43 in Maximum working load (kg): 1000 kg Maximum working load (lb): 2205 lb Breaking load (kg): 2000 kg Breaking load (lb): 4409 lb

57mm Carbo Air Block with Swivel Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications: Sheave: 57mm / 2-1/4in Length: 110mm / 4-5/16in Weight: 87g / 3.1oz Shackle pin: 5mm / 3/16in Maximum line: 10mm / 3/8in Maximum working load: 359kg / 792lb Breaking load: 1079kg / 2380lb

40mm Carbo Air Block with Swivel Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications: Sheave: 40mm / 1-9/ 16in Length: 86mm / 3-3/8in Weight: 44g / 1.6oz Shackle pin: 4mm / 5/32in Maximum line: 10mm / 3/8in Maximum working load: 220kg / 485lb Breaking load: 735kg / 1620lb

75mm Carbo Air Block with Swivel Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications: Sheave: 75mm / 2-15/16in Length: 137mm / 5-3/8in Weight: 195g / 6.9oz Shackle pin: 6mm / 1/4in Maximum line: 14mm / 9/16in Maximum working load: 550kg / 1213lb Breaking load: 1650kg / 3638lb