Pontoon Bolster Bracket - 15-3/4" x 2" Pontoon bolster brackets support bunkboards in a shallow V cradle configuration that best suits pontoon hulls. Best when installed with 2x6, 2x8, or 2x10 carpeted bunk boards laid flat. A bracket should be installed at each frame cross member for maximum support and load capacity.

Pontoon Wing Bracket Pontoon bolster brackets support bunk boards in a shallow V cradle configuration that best suits pontoon hulls. This V-wing bracket is designed with a 7" lateral adjustment slot for perfect pontoon to trailer alignment. 1/8" thick steel Hot dip galvanized for durability Best when installed with 2x6, 2x8, or 2x10 carpeted bunk boards laid flat A bracket should be installed at each frame cross member for maximum support and load capacity.

Double U-Bolt Bolster Bracket - 8-3/4" Mounting bunk boards using double U-bolt bolster brackets provides the most rigid bolt-on bracket mounting possible. Made from heavy 7 ga galvanized steel, these brackets are 4” wide with slots that are 1/2” wide spaced 1-3/4” apart with a top hole diameter of 1/2”.

Hawse Pipe Inner Hole: 4-3/4" x 2-3/4" Flange: 8" x 5" Fastener:#10(3) Pipe Depth:1-3/4" Material: 316 Stainless Steel

Anchor Replacement Roller - 2-3/4" x 2-7/8" Features: Nylon Replacement Wheel Diameter: 2-3/4" Width: 2-7/8" Rope Size: 3/4"

Double Slot Swivel Bolster Bracket Assembly - 13" C.E. Smith's adjustable bracket is designed to support roller bunks. Hot dip galvanizing for years of use in the harsh marine environment. This bracket assembly uses bolster bracket-10102G and swivel bracket-10200G. Features: Bolster bracket: 12" bracket, 11 gauge material, 2-1/2" wide, slots 1/2" wide, swivel hole 1/2" dia., slots 4-3/4" Swivel bracket: 11 gauge material, bunk flange 1-3/8" x 3-1/2", bunk flange holes 3/8" dia., swivel flange 2" tall x 3-1/2", swivel flange hole 1/2" dia., hole centers 2-1/2" Overall assembly length is 13"

Trailer Hub Kit - 1-3/8" x 1-1/16" Tapered - 5 x 4-1/2" Galvanized Features: 1-3/8" x 1-1/16" Tapered 5 x 4-1/2" Galvanized WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm, and CADMIUM which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

Description: Plate: 3/4" x 2-1/4" Material: 304 Stainless Steel Stock: 3/8" Eye Ring Diameter: 1" Thread Length: 2-1/2"

C.E. Smith Company C. E. Smith Company, Inc. was established as a manufacturing firm producing precision metal stampings, fabrications and assemblies for a broad variety of industries. Stainless steel boating and fishing products are sold under the SMITH TM trademark. The line includes an adjustable, completely stainless steel t-top, fiberglass electronic boxes, t-top storage bags navigation lights and antenna bracket.

53696 Rod Safety Ring Attach the C.E. Smith Rod Safety Ring to the bottom of rod holders and stop worrying about dropping your equipment.   Made to secure into the 0.5" drain hole found at the bottom of the flush-mount cast-bottom rod holder from C.E. Smith, the rod safety ring gives you a convenient place for you to tether your rod and reel, boat fender, or any other valuable you don't want to fall overboard.  Features: Provides a convenient place to secure rods 316L Marine-grade stainless steel Quick and easy installation *Sold as an Individual

Pontoon Curved Corner-Gard - 3"W x 12"L This unique Corner-Gard offers a level of protection to areas on the Pontoon boat other fenders or bumpers can't provide. The Pontoon Corner-Gard comes shaped to mount on either a radius style or 90o pontoon corners. The Corner-Gard mounts over the original factory installed aluminum corner section to provide air-cushioning impact protection when docking. Special silver PVC formulated to match the aluminum color of the boat and secures with the included stainless fasteners.  Specifications: Dimensions: 3"W x 12"L Mounting hardware included

Pontoon Square Rail Adjustable Clamp On Rod Holder All the same great features as the 304L stainless adustable clamp-on (55105A) with a clamp made to fir the square rails found on pontoon boats. Each rod holder comes with 2 protective liners, one to fit 1" and one to fit 1-1/4" square rail. The liners are round on the outside allowing the rod holder to be adjusted to any angle above the water, and the hidden left or right adjustment allows even more adjustment choices. Our clamp fits 1" to 1-1/4" square rail Made from 304 stainless steel tube lined with a UV resistant black PVC and fitted with a chrome zinc alloy adjustable clamp Angle around the rail is infinitely adjustable Angle to the left or right adjusts in 15 degree increments 9" tall tube with 1-5/8" ID Includes 304 stainless mounting screws and the hex key needed to make the angle adjustment and to tighten the clamp in place. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Aluminum Horizontal Clamp-On Rod Holder OD - White Powder Coated with Sleeve C.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style. Features: Style: Horizontal Fits rails with 1.66" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Adjustable Mid Mount Rod Holder - 7/8" or 1" OD - White Powder Coat Aluminum with Sleeve & Hex Key C.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style. Features: Style: Adjustable Mid Mount Fits rails with 7/8" or 1" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Center Swivel Bracket - 2" Galvanized swivel top bracket provides vertical and tilting adjustment for trailer bunks. Swivel Bracket for mounting Bunk Boards to Bolster Brackets. Features: Bunk flange holes 3/8" dia. Bunk flange 1-3/8" x 3-1/2" Swivel flange hole 1/2" dia. Swivel flange 2" tall x 3-1/2" 2" bunk flange hole centers 11 gauge material Sold individually