|
StructureScan 3D Thru Hull with L/H Chirp and StructureScan 3D
StructureScan 3D thru hull transducer with Low and High CHIRP. Single transducer for flat to hull mounting or fits deadrises up to 5 degrees with fairing block.
StructureScan 3D connectors connect to a StructureScan 3D module, CHIRP connector includes XID in the 9 pin connector and connects directly to the MFD.
|
1362.08 |
|
|
StructureScan 3D Thru-Hull Transducer Fairing Block Only
Navico's high-performance fairing block gives you greater StructureScan performance at speed.
|
81.92 |
|
|
StructureScan 3D® Thru-Hull Transducer with Medium/High CHIRP
StructureScan 3D thru-hull transducer with Medium and High CHIRP. Single transducer for flat to hull mounting or fits deadrises up to 5 degrees with fairing block.
StructureScan 3D connectors connect to a StructureScan 3D module, CHIRP connector includes XID in the 9 pin connector and connects directly to the MFD.
|
1362.08 |
|
|
xSonic Bronze 12° HDI Transducer Thru Hull 50/200 455/800 with 9 pin connector and 10M Cable
Bronze Hybrid Dual Imaging™ (HDI) tilted element thru hull transducer
Provides 50/200kHz traditional frequencies PLUS 455/800kHz Down Scan Imaging plus temperature
12 degree tilt
10M Cable
Beam Width: 50kHz @ 45°, 200kHz @ 11° 455kHz- Fore to aft 2.8°, Port to starboard 56°, 800kHz Fore to aft 1.6° Port to starboard 32°
|
456.37 |
|
|
xSonic Bronze 0° HDI Transducer Thru Hull 50/200 455/800 with 9 pin connector and 10M Cable
Bronze Hybrid Dual Imaging™ (HDI) tilted element thru hull transducer
Provides 50/200kHz traditional frequencies PLUS 455/800kHz Down Scan Imaging plus temperature
0 degree tilt
10M Cable
Beam Width: 50kHz @ 45°, 200kHz @ 11° 455kHz- Fore to aft 2.8°, Port to starboard 56°, 800kHz Fore to aft 1.6° Port to starboard 32°
|
456.37 |
|
|
|
|
|
Temperature Sensor Thru-Hull
Replaces EP-80 Pre-configured as Water Temperature Can be reconfigured* to
output the following temperature types:
Outside
Inside
Engine Room
Cabin
Live Well
Bait Well
Refrigeration
Heating System
*can only be controlled/configured on Navico MFDs
|
90.13 |
|
|
Groco Th-3000-L Thru Hull 3" Less Nut
Groco- Thru Hull 3" Less Nut
|
247.60 |
|
|
SS75H Stainless Steel Thru-Hull 20° Tilt 600W Chirp - High Frequency
High-Frequency CHIRP Transducer with Temperature with Stainless Steel Thru-Hull.
Features:
Function: Depth,Temperature
Frequency: 130-210 kHz
Mount Style: Thru-Hull, Flush, 20 Degree Tilt
Housing Material: Stainless Steel
Install Type: Thru-Hull
Power Rating: 600W
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
800.00 |
|
|
Double Barb Inline Scupper Check Valve - 3/4" - Black
A great solution to provide a scupper check valve in the drain line. Allows use of standard thru-hull fittings in the cockpit and on the hull exterior.
Features:
Prevents Backwash
Chemical Resistant Materials
Thermo-Plastic Flapper
|
18.85 |
|
|
Double Barb Inline Scupper Check Valve - 1-1/8" - Black
A great solution to provide a scupper check valve in the drain line. Allows use of standard thru-hull fittings in the cockpit and on the hull exterior.
Features:
Prevents Backwash
Chemical Resistant Materials
Thermo-Plastic Flapper
|
18.85 |
|
|
Double Barb Inline Scupper Check Valve - 1-1/2" - Black
A great solution to provide a scupper check valve in the drain line. Allows use of standard thru-hull fittings in the cockpit and on the hull exterior.
Features:
Prevents Backwash
Chemical Resistant Materials
Thermo-Plastic Flapper
|
18.85 |
|
|
StructureScan 3D® Stainless Steel Thru-Hull Transducer - Single
Lowrance and Simrad Yachting announce the release of new thru-hull StuctureScan 3D® Stainless Steel transducer for the StructureScan 3D® Sonar Imaging product line, providing more range and greater resolution.
As with transom-mount StructureScan 3D® transducers, the thru-hull Stainless Steel version deliver extreme target detail, bottom discrimination plus bait and game fish separation at depths to 300'(92M) and a wider range of 600'(183M) Left & Right coverage.
These Stainless Steel StructureScan 3D® transducers from Airmar® are available only from Navico exclusively for StructureScan 3D® systems. These sturdy, Stainless Steel StructureScan 3D® transducers are resistant to the electrical forces in the environment where it will be used.
Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan plus DownScan Imaging™ & 3D Imaging technology; an optional high-performance fairing is avaliable (000-13581-001) give you greater StructureScan performance at speeds; and feature a 30'(9M) transducer cable.
For boats with steep or variable deadrise hull angles, consumers must purchase the StructureScan® 3D Stainless Steel Thru-Hull Pair (000-13560-001).
|
1362.08 |
|
|
StructureScan 3D® Stainless Steel Thru-Hull Transducer - Pair
The Dual thru-hull StuctureScan 3D® Stainless Steel transducer for the StructureScan 3D® Sonar Imaging product line, providing more range and greater resolution.
These transducers are designed for boats with steep or variable deadrise hull angles, for seamless display of SideScan and DownScan and 3D Imaging.
As with transom-mount StructureScan 3D® transducer, the Dual thru-hull Stainless Steel version deliver extreme target detail, bottom discrimination, plus bait and game fish separation at depths to 300'(92M) and a wider range of 600'(183M) Left & Right of coverage.
These Dual thru-hull Stainless Steel StructureScan 3D® transducers from Airmar® are available only from Navico exclusively for StructureScan 3D® systems. These sturdy, Dual thru-hull Stainless Steel StructureScan 3D® transducers are resistant to the electrical forces in the environment where it will be used.
Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan, DownScan Imaging™ and 3D Imaging technology; an optional high-performance fairing is avaliable (000-13581-001) give you greater StructureScan performance at speed; and feature a 30'(9M) transducer cable.
**Note if you require a longer cable you will need 2 each 000-12752-001 transducer extension cable**
|
2329.33 |
|
|
TotalScan Thru-Hull Transducer Medium/High CHIRP, DownScan, StructureScan HD®
TotalScan thru-hull transducer with Medium and High CHIRP. Single transducer for flat to hull mounting or fits deadrises up to 5 degrees with fairing block.
The TotalScan™ Transducer allows anglers to access Medium CHIRP, High CHIRP, DownScan™ Imaging and StructureScan™ using only a single transducer.
Features:
All-in-one transducer featuring Broadband, CHIRP, StructureScan HD and DownScan Imaging™
Supports 83/200kHz Broadband sonar frequencies
Supports Medium and High CHIRP frequencies
Supports 455/800kHz StructureScan® frequencies
Supports Water Temperature
|
922.80 |
|