|
N2KEXT-2RD 2' NMEA 2000 Cable
2' NMEA 2000 Cable
|
27.30 |
|
|
N2KEXT-15RD 15' NMEA 2000 Cable
15' NMEA 2000 Cable
|
50.06 |
|
|
N2KEXT-6RD 6' NMEA 2000 Cable
6' NMEA 2000 Cable
|
40.03 |
|
|
WS2-C06 NMEA 2000 Cable for Heading Sensor Weather
With NMEA 2000 output only. End in a standard male 5-Pin NMEA 2000 connector 6M cable.
6M/20'
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
87.68 |
|
|
NMEA 2000 Cable - 6M
Features:
Length: 6M
NMEA 2000 Cable
|
62.80 |
|
|
NMEA 2000 Cable & T Connector Connection Kit for Siren 3 Pro
Optimize the connectivity of your Connected Boat® system, allowing you to monitor engine data, water, fuel and waste tanks, and more! The NMEA 2000 Connection Kit includes a 2-meter connection cable and a 3-Way Connection "T" – everything you'll need to hook up to the NMEA 2000 data system 'backbone'.
*Compatible with the Siren 3 Pro Only
|
46.16 |
|
|
NavLink 2
“NavLink 2 is an easy to fit NMEA 2000 to Wifi server designed to make NMEA 2000 navigation data available for apps on smartphones, tablets, iPads and PCs.”
Features:
NavLink 2 is an easy to fit NMEA 2000 to Wifi server designed so that NMEA 2000 navigation data can be made available for apps on smartphones, tablets, iPads and PCs. Installation takes seconds as a result of direction connection to the NMEA 2000 back bone and self-powered from the data network.
Once installed, it creates a local WiFi network for devices to connect or can be programmed to join an existing wireless network if one is already installed. This is ideal for devices like the Furuno wireless radar which require operation through their own dedicated network but require NMEA 2000 data integration for charting apps.
NavLink 2 now works with the popular Navionics Boating App for Apple iOS and Android. Therefore allowing display of GPS and AIS data on your Navionics charts.
Specifications:
NMEA 2000 to WiFi server
Self powered from NMEA 2000 bus – fits in seconds
Supports TCP/IP and UDP connection modes
Provides AIS, navigation and instrument data to apps
Compatible with all popular apps like iNavX, TimeZero, Weather 4D, Navionics, SailGrib, NavLink, iSailor, SeaPilot, AquaMap etc
Up to 7 connected devices
Compatible with Windows, Linux, MAC OS, iOS and Android
Easy web interface for programming
Password protected
Can act as dedicated wireless server or rather can connect to an existing wireless network
Diagnostic data display mode and LED status lights
Internal hi gain WiFi antenna
Super-fast 230KBs operation
Optional raw data mode for developers and likewise advanced users
Supplied with NMEA 2000 cable
|
235.15 |
|
|
SeaTalk 2 / NMEA 2000 Interface Cable (1.5m)
Interface cable for connecting E-Series displays to Raymarine SeaTalk 2 or 3rd party NMEA 2000 Devices.
Twist-lock connector at the E-series display end, and a standard 5-pin waterproof SeaTalk 2 style connector at the other.
|
61.36 |
|
|
Lowrance Outboard Cable-Steer Pilot Pack
Everything you need in one box to fit an autopilot to your outboard motor, the Outboard Pilot lets you focus on fishing activity while keeping the boat on course.
When connected to a Lowrance HDS Gen2 or Gen2 Touch, the Outboard Pilot can steer to a waypoint or along a route, select a turn pattern or simply hold a constant heading.
The Lowrance SmartSteer™ user interface allows you to easily switch between electric-steer, trolling-motor control and outboard motor control directly from your HDS display. And, with your HDS display, you can easily convert trails to routes - so you can retrace a previous track and get your boat back to the dock from your fishing area.
HDS Units require 3.5 Software
Steer your outboard motor to a heading, waypoint, route or cursor, with control from your HDS Gen2 or Gen2 Touch display
Lowrance SmartSteer™ interface provides control of your cable-steered outboard motor, as well as the MotorGuide Xi5 Pinpoint electric-steer trolling motor
"One-touch" route creation from trails
Pre-set turn patterns for more effective fishing/trolling presentations
Recommended for single-outboard setups, on boats that are 30 feet and less, in length
VRF (Virtual Rudder Feedback).simplifies pilot installation eliminating the need for a rudder position sensor
Easy setup.straightforward guide steps you through first-time install
Easy-to-install, plug-and-socket connection with no complex terminal wiring
Supported by Lowrance Advantage Service program
Dash-mount button for one-touch Auto/Standby activation
Steer to Heading, Course or Route
High efficiency, super-quiet 0.8L hydraulic gear pump
Lowrance Outboard Pilot Cable-Steer Pack replaces the manual helm-drive unit
Morse 290, Morse 304411 and Teleflex SSC52 cable compatibility
Helm-1 is only compatible with the NAC-1.Helm-1 includes variable-voltage feedback interface
2 Year Limited Warranty
Package Includes:
NAC-1 Autopilot Computer - 000-11769-001
The brains behind the Lowrance Outboard Pilot system. It contains the steering computer and electronics for the drive unit motor and clutch.
Helm-1 for Outboard Pilot - 000-11771-001
This drive unit replaces your manual helm-drive unit on single cable installations. Compatible with Morse 290, 304411 and Teleflex SSC52 cables. Includes voltage rudder-feedback sensor, and is only compatible with NAC-1.
N2K 4 Way - 000-10996-001
NMEA2000 4-way joiner. Connect four NMEA2000 Micro-C devices to the NMEA2000 Network.
N2KEXT-2RD - 000-0119-88
0.6M (2') NMEA 2000® cable for backbone extension or or drop cable to connect an additional network device
N2KEXT-6RD - 000-0127-53
1.82M (6') NMEA 2000® cable for backbone extension or drop cable to connect an additional network device
N2KEXT-15RD - 000-0119-86
4.55M (15') NMEA 2000® cable for backbone extension or or drop cable to connect an additional network device
TR-120-KIT - 000-0127-52
Set of 1 male and 1 female NMEA 2000® terminators
MICRO-C POWER CABLE ONLY - NO T CONN - 000-12202-001
|
1738.80 |
|
|
NMEA 2000 Compatibility Kit
This NMEA 2000 Kit allows Polk's Ultra Marine Certified P1 and PA4A to be seamlessly added to your boat's onboard NMEA 2000 network, enabling control and two-way communication from your boat's Garmin and Raymarine Chartplotter/Fish Finder Multi-Function Display (MFD) device.
Control functions include source selection, playback functions, volume up/down and more. Two-way communication between the Polk P1 and PA4A and your MFD also allows the display of source selection, song/track/album title (no album art), radio frequency and more to display on the MFD interface.
Comaptable With:
Polk PA4A receiver
Polk P1 Marine receivers
In the Box:
NMEA2000 interface module
12" NMEA 2000 cable
11" Y-adapter cable
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
203.48 |
|
|
AISnode NMEA 2000 Boat AIS Class B Receiver
AISnode is the first AIS Receiver to be designed exclusively for NMEA 2000. With a single, integral 0.75m NMEA 2000 cable that takes power from the network and outputs the AIS data on to the network, the AISnode is incredibly easy to install. Just find or fit a spare NMEA 2000 "T Piece", screw the AISnode cable to the connection, connect a VHF antenna and the installation is complete.
Utilizing the same high performance, true dual channel receiver that our latest Class B Transponders have, AISnode will receive every AIS equipped vessel within VHF range and never miss or drop a single target. All of the latest NMEA 2000 AIS message types are supported, including AIS SARTs, AtoNs and Class B static data, ensuring full compatibility with all of the latest AIS enabled chart plotters.
NMEA 2000 is becoming more and more popular on new boats and nearly all new chart plotters have an NMEA 2000 interface, with one or two models only providing an NMEA 2000 interface. With its reliability, easy plug and play connectivity and industry standard compatibility, it is not surprising why NMEA 2000 is gradually replacing the older NMEA0183 standard.
The AIT2000 and AIT3000 Class B Transponders already provide NMEA 2000 connectivity but not all customers want the extra expense of purchasing and installing a transponder and for small chart plotters an AIS receiver is still a popular choice.
Features:
Application Domain: For Boats
Type: Class B Receiver
|
545.95 |
|
|
NMEA 2000 T-Connector - 1-Way Extension Block
As the NMEA 2000 network expands beyond the 3-device limit of Digital Yacht’s NMEA 2000 Starter Kit, users can use one of these single T-pieces to add devices. With male > female > female connectors, multiple T-pieces can be plugged together or added to the 4-way T-piece included in the starter kit. The lower “drop cable” connector is female so that there are no exposed pins when the drop cable is removed.
*Digital Yacht can supply NMEA 2000 cables and connectors to expand the NMEA 2000 to whatever size is needed (up to the maximum 50 NMEA 2000 device limit).
Features:
NMEA 2000 Single T-Piece
Standard “Micro C” connectors make it very easy for future network expansion
Metal connectors improve reliability
Waterproof rating of IP68
|
26.83 |
|
|
NMEA 2000 T-Connector - 6 Ports
As the NMEA 2000 network expands beyond the 3-device limit of Digital Yacht’s NMEA 2000 Starter Kit, users can use this 4-way T-piece to add another four additional devices. With male > female > female connectors, multiple T-pieces can be plugged together or added to the 4-way T-piece included in the starter kit. Also, The 4x lower “drop cable” connector is female so that there are no exposed pins when the drop cable is removed.
*Digital Yacht can supply NMEA 2000 cables and connectors to expand the NMEA 2000 to whatever size is needed (up to the maximum 50 NMEA 2000 device limit).
Features:
NMEA 2000 4 x T-pieces
Standard “Micro C” connectors make it very easy for future network expansion
Metal connectors improve reliability
Waterproof rating of IP68
|
78.07 |
|
|
DST800L-235-N2 235kHz Bronze Thru-Hull - Long Stem - NMEA 2000
The DST800 is a Smart Triducer multi-sensor that offers depth, speed, and temperature functions in one compact thru-hull fitting. Digital signal processing inside the housing provides depth, speed, and temperature data to a chart plotter, radar screen, or digital display, eliminating the need for a dedicated depth sounder.
One hole in the boat's hull makes this Triducer multi-sensor attractive to both boat builders and boat owners. And the retractable multi-sensor is available with NMEA 0183, NMEA 2000®, or custom CAN protocols. The wide port-starboard, fan shaped beam is able to find bottom even when installed on high-deadrise hulls or on sailboats when heeled.
Features:
Thru-Hull, Long-Stem
Depth, Speed, and Temperature
NMEA 2000® output , 100 W RMS power
235kHz output will not interfere with fishfinders
Maximum depth range 100 m (330’)
Minimum depth range 0.5 m (1.6’)
Retractable Insert
6 m (19.8’) NMEA 2000® cable and connector
Usable Shaft Length: 102 mm (4”)
Can be installed with High-Performance Fairing (sold separately)
Can be installed with Low-Profile adapter ring
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
665.48 |
|
|
P79 NMEA 2000 In-Hull 235 kHz
The P79 in-hull transducer easily adjusts to hull deadrise angles up to 22 °. This ensures that the beam is vertically oriented to receive echos, resulting in accurate depth readings. Unlike traditional "puck" type transducers, our P79 consists of a base that is bonded to the hull and filled with liquid. The separate transducer then attaches to the base with a twist lock. The sound waves travel more efficiently though the liquid, giving the best possible performance.
The unique adjustable-angle design ensures the beam is vertically oriented for maximum echo returns and the best possible performance. Because the transducer is mounted inside the hull, it is the perfect solution for rigid inflatable boats (RIBS) and racing sailboats.
Features:
Adjusts to hull deadrise angles up to 22°
No holes to drill
Depth Only
Frequency: 235 kHz
Cone: 11°
Recommended for solid fiberglass hulls
Epoxies to aluminum hulls under 0.38 mm (0.150”) thick
Recommended for planing-hull power boats, trailered boats, rigid inflatable boats
No hull protrusions
6M (20’) NMEA 2000® cable & connector
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
373.09 |
|