Foam Filter for AirForce Blaster Sidekick Dryer *3-Pack Package of 3 foam filters.  For use with the SK-1 and QD-1 Catalog P/N MVC-49BX *Sold as an Individual

Foam Filter for Master Blaster® & AirForce® Commander Dryer *3-Pack Package of 3 foam filters.  For use with the ED-500 and AFTD-3  Catalog P/N MB-3CD  *Sold as an Individual

AirForce® Blaster Sidekick Car & Motorcycle Dryer Dry your car or motorcycle in minutes with warm (30 degrees F above ambient), dry, filtered air generated by this handheld powerhouse.  Getting a professional quality, dry finish for your ride has never been easier than it is with the Air Force® Blaster® Sidekick™!  It is the perfect way to expel water from side-view mirrors, door jams, body seams, grills, lights, engines, and more. The Sidekick™ dryer does it all! The all-steel construction of the Air Force® Blaster® Sidekick™ makes it nearly indestructible, yet it only weighs about three pounds.  Don’t be fooled though, this lightweight car dryer packs a powerful 1.3 HP motor and single-stage fan that moves 18,000 feet of air per minute.  Its portable size means the Sidekick™ delivers powerful drying results without straining your muscles. The Sidekick™ features a 12-inch heavy-duty power cord, durable neoprene nozzle, and air flare, as well as an EZ Change foam filter. Best of all, this high-performance car and motorcycle dryer are designed to save you time and get your pristine ride back on the road in no time. Catalog P/N SK-1 Technical Specifications: Construction - All-steel w/matte finish Motor/Voltage - 1.3 HP Amps - 8.3 AMPS Airflow - 18,000 FPM Cord - 12'  Plug -  3 pong with conductor ground Weight - 3 Pounds Dimensions - 4.25" x 7.5" x 9.75" In the Box: Dryer EZ change foam filter x one (1) Heavy Duty Nozzles x 2 Instruction Manual *Sold as an Individual WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Foam Filter for DataVac® Electric Duster *3-Pack Package of 3 foam filters.  For use with the ED-500 Catalog P/N MVC-49ED *Sold as an Individual

AirForce® Blaster Car & Motorcycle Dryer The Air Force® Blaster® Car and Motorcycle Dryer is the fastest and safest way to dry any vehicle.  Water can run, but it can’t hide. All steel, yet weighing only eight pounds, the Air Force® Blaster® Car and Motorcycle Dryer offers a durable yet lightweight drying option.  This powerful dryer has a 4 Peak HP, two-stage, dual-fan motor.  It easily and safely dries cars and motorcycles in minutes. You’ll find that this high-powered dryer is perfect for getting water out of side-view mirrors, door jams, body seams, grills, lights, and other difficult areas.  The Air Force® Blaster® produces warm (up to 30 degrees above ambient), dry, filtered air that will not harm paint or chrome, while providing you with a flawless finish as water evaporates before water spots or streaks can form. Catalog P/N B3-CD Technical Specifications: Construction - All-steel  Motor/Voltage - 4 HP Amps - 10 AMPS Airflow - 29,250 FPM Cord - 12'  Plug - Three (3) pong w/conductor ground Weight - 8 Pounds Dimensions - 11.5" x 7" x 7" In the Box: Dryer 10' Commercial grade hose EZ change foam filter Heavy Duty neoprene blower Nozzle 5 Additional interchangeable attachments  Instruction Manual *Sold as an Individual WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Dometic DVF Vent Filter for Holding Tanks Dometic goes that extra mile so that you don't have to and reducing the use of chemicals is always our aim, especially in a marine environment.  The Dometic DVF vent filter ensures just that and is designed to absorb odors from a holding tank vent and keep the surrounding air clean and pleasant.   The vent filter eliminates the need for any holding tank chemicals since it is manufactured with superbly effective odor-absorbing filter material. Adapters for different vent hose sizes are included in the kit. Features: No chemicals needed Absorbs odors Environmental awareness Legacy P/N 309311004 and 309311001  *Sold as an individual  WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm, and ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

22-18 AWG Heat Shrink Butt Connector - 3 Pack Butt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection. Features: Made from tinned copper and various insulations Up to 600 Volts Not applicable to all styles Operating Temp: -55°C to 125°C UL, CSA, RoHS Compliant Benefits & Protections Impact Resistant Multiple Uses Long Term Protection Easy to Install Specifications: Wire Range: #22-18 AWG Insulation Color: Red Max Wire Insulation Outer Diameter (inch): 0.19" Package Size: Three

16-14 AWG Heat Shrink Butt Connector - 3 Pack Butt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection. Features: Made from tinned copper and various insulations Up to 600 Volts Not applicable to all styles Operating Temp: -55°C to 125°C UL, CSA, RoHS Compliant Benefits & Protections Impact Resistant Multiple Uses Long Term Protection Easy to Install Specifications: Wire Range: #16-14 AWG Insulation Color: Blue Max Wire Insulation Outer Diameter (inch): 0.21" Package Size: Three

12-10 AWG Heat Shrink Butt Connector - 3 Pack Butt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection. Features: Made from tinned copper and various insulations Up to 600 Volts Not applicable to all styles Operating Temp: -55°C to 125°C UL, CSA, RoHS Compliant Benefits & Protections Impact Resistant Multiple Uses Long Term Protection Easy to Install Specifications: Wire Range: #12-10 AWG Insulation Color: Yellow Max Wire Insulation Outer Diameter (inch): 0.28" Package Size: Three

DS-H10-BLK Horizontal Cable Seal- Black *3-Pack This horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting.  Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during installation. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .24" to .39" (6 - 10 mm)   Height - 1.06" (27 mm) Width - 1.75" (44.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Three (3) Pack

DS-H6-BLK Horizontal Cable Seal - Black *3-Pack This horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting.  Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during installtion. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .08" to .24" (2 - 6 mm)   Height - .79" (20 mm) Width - 1.12" (28.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as a Three (3) Pack

Oval Kite Floats - Multi-Color  *3-Pack These floats are made from high-density foam with nickel-plated brass inserts which are corrosion resistant.  The grommet inserts help prevent your fishing line from chafing.  All of these features mean less friction and more extended durability.  Tigress multi-colored 3-pack of oval kite floats provides one (1) pink, one (1) green and one (1) orange kite float. *Sold as a Pack of three (3)

22-18 AWG Heat Shrink Ring Terminal - #10 Stud Size - 3 Pack Ring terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use. Features: Tinned copper 600 Volts Operating temperature is -55°C to 125°C Highly compliant Benefits & Protections: Solid connections Extremely durable Long-lasting Tin-plated Easy to install Specifications: Color: Red Wire AWG: 22-18 AWG Stud Size: #10 Terminal Pad Width (inch): 0.32” Package Size: Three included

22-18 AWG Heat Shrink Ring Terminal - 1/4" Stud Size - 3 Pack Ring terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use. Features: Tinned copper 600 Volts Operating temperature is -55°C to 125°C Highly compliant Benefits & Protections: Solid connections Extremely durable Long-lasting Tin-plated Easy to install Specifications: Color: Red Wire AWG: 22-18 AWG Stud Size (inch): 1/4" Terminal Pad Width (inch): 0.48” Package Size: Three included

22-18 AWG Heat Shrink Ring Terminal - 5/16" Stud Size - 3 Pack Ring terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use. Features: Tinned copper 600 Volts Operating temperature is -55°C to 125°C Highly compliant Benefits & Protections: Solid connections Extremely durable Long-lasting Tin-plated Easy to install Specifications: Color: Red Wire AWG: 22-18 AWG Stud Size (inch): 5/16" Terminal Pad Width (inch): 0.48” Package Size: Three included