|
No-Drill Laptop Base for the Dodge Challenger, Charger, Magnum, Sprinter Van, Freightliner Sprinter Van & Mercedes Sprinter Van
Compatible Vehicles:
Chrysler
300 (2011-2021)
Dodge
Challenger (2011)
Charger (2005, 2011-2021)
Charger Police Package (2005, 2011-2021)
Magnum (2005)
Magnum Police Package (2005)
Sprinter Van (2007-2011)
Freightliner
Sprinter Van (2010-2020)
Mercedes
Metris (2016-2021)
Sprinter Van (2010-2019)
Ram
Promaster (2014-2021)
Promaster
City (2014-2020)
Placement of Mount:
Passenger side on the floor, in front of seat
Drilling Requirements:
No - uses existing seat bolts
Seat Configuration:
Bucket
Pole:
Purchased Separately
Weight:
4.9 lbs.
Material:
Powder Coated Steel
Features:
Quick installation with no drilling needed. Rock solid construction with a lifetime warranty.
|
63.79 |
|
|
No-Drill Laptop Base for the Ford Police Interceptor Sedan
Compatible Vehicles:
Ford Police Interceptor Sedan (2013)
Ford Taurus (2013)
Placement of Mount:
Between the seat cushion and seat frame on passenger side
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Pole:
Purchased Separately
Weight:
3.5 lbs.
Material:
Powder Coated Steel
|
88.24 |
|
|
No-Drill Laptop Base for the Ford Explorer and Police Interceptor Utility
Compatible Vehicles:
Ford Explorer (2011-2012)
Ford Police Interceptor Utility (2013)
Placement of Mount:
Passenger side floor board, in front of seat
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Pole:
Purchased Separately
Material:
Powder Coated Steel
Notes:
Utilizes existing vehicle hardware. Plastic trim may be re-installed once the No-Drill base has been secured into vehicle.
|
45.35 |
|
|
No-Drill™ Vehicle Base f/ '10-13 Ford Transit Connect + More
Compatible Vehicles:
Ford
Transit Connect (2010-2013)
Transit Connect Wagon Premiun (2013)
Transit Connect XL Van (2013)
Transit Connect XLT Van (2013)
Transit Connect XLT Wagon (2013)
Dodge
Grand Caravan (2008-2009 2012-2016)
Grand Caravan AVP (2013)
Grand Caravan Crew (2013)
Grand Caravan RT (2013)
Grand Caravan SE (2013)
Grand Caravan SXT (2013)
RAM C/V Tradesman Van (2014-2015)
Chrysler
Town & Country (2008-2009 2012-2016)
Placement of Mount:
Passenger side, front, where seat rail frame attaches to floor board
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Pole:
Purchased Separately
Weight:
4.5 lbs.
Material:
Powder Coated Steel
|
47.48 |
|
|
No-Drill Laptop Mount for the Chevrolet 2500 C/K, 3500 C/K, Silverado, Suburban, Tahoe, GMC Sierra & Yukon
Part #: RAM-VB-102-SW1
Compatible Vehicles:
Chevrolet 2500 C/K (2000-2006)
Chevrolet 3500 C/K (2000-2006)
Chevrolet Silverado (1999-2006)
Chevrolet Suburban (2000-2006)
Chevrolet Tahoe (2000-2006)
GMC Sierra Truck (2000-2006)
GMC Yukon (2000-2006)
This No-Drill Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
Placement of Mount:
Passenger side floor board, in front of seat
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Material:
High Strength Composite and Powder Coated Steel
Notes:
Angled step moves mount away from passenger leg space. There are a total of 3 pieces of steel that make this part, 2 are welded together and the 3rd is bolted. Base will not interfere with factory installed console or 4WD lever.
|
245.35 |
|
|
No-Drill Laptop Mount for the Chevrolet Express Van & GMC Savana Van
Compatible Vehicles:
GMC Savana Van (1998-2013)
Chevrolet Express Van (1998-2013)
This No-Drill Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
Placement of Mount:
Attaches between seat frame and floor board. Uses front and rear, inside seat studs
Drilling Requirements:
No - uses existing seat bolts
Seat Configuration:
Bucket
Material:
High Strength Composite and Powder Coated Steel
|
233.02 |
|
|
RAM® No-Drill™ Vehicle Base for 2019 RAM 1500
This heavy duty, steel RAM® No-Drill™ laptop vehicle base is custom-designed for the 2019 Dodge RAM 1500. Using the passenger side seat rail bolts as attachment points, provided hardware is used to secure the mounting base in the vehicle.
Specifications:
Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board
Drilling Requirements: No - attaches to seat studs
Seat Configuration: Bucket
Pole: Purchased Separately
Material: Powder Coated Steel
|
46.96 |
|
|
Compatible Vehicles:
Chevrolet Impala Police Package (2006-2013)
This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
Material:
High Strength Composite and Powder Coated Steel
Notes:
If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit
|
340.79 |
|
|
No-Drill™ Laptop Base for the Ford F-150 & Lincoln Mark LT
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Placement of Mount:
Passenger side floor board, under seat
Drilling Requirements:
No - uses existing seat bolts
Hole Pattern:
Seat Bolt Distance: 11.5" center to center
Pole:
Purchased Separately
Material:
Powder Coated Steel
Features:
Quick installation with no drilling needed. Rock solid construction with a lifetime warranty.
Compatible Vehicles:
Ford
F-150 (2004-2014)
F-150 Crew Cab (2010)
F-150 FX2/FX4 (2012-2014)
F-150 Harley Davidson (2012)
F-150 King Ranch (2012-2013)
F-150 Lariat (2012-2013)
F-150 Limited (2012-2013)
F-150 Platinum (2012-2013)
F-150 Raptor (2013)
F-150 Regular Cab (2011)
F-150 STX (2012-2013)
F-150 Super Cab (2011)
F-150 Super Crew (2011)
F-150 SVT (2013)
F-150 SVT Raptor (2012)
F-150 XL (2012-2013)
F-150 XLT (2013)
Lincoln
Mark LT (2005-2011)
Note:
If you are installing this product into a 2009-2010 F-150 with the slide out cup holder, the RAM-VB-109A is the preferred kit. The standard RAM-VB-109 kit will install but limit the use of the cup holder. To use the RAM-VB-109 with the slide out cup holder, pull the cup holder all the way out if you plan to use it prior to installation. Once installed, the cup holder will not be able to slide back under the center console. The RAM-VB-109A has an adjustable riser that can be positioned so that the cup holder is not interfered with. For base model trucks without the slide out cup holder, the standard RAM-VB-109 kit is ideal.
|
81.37 |
|
|
No-Drill™ Vehicle Base for '05-18 Toyota 4Runner & Tacoma
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Features:
Material: Powder Coated Steel
Placement of Mount: Passenger side on the floor, under front seat
Drilling Requirements: None - attaches to seat bolts
Seat Configuration: Bucket
Pole: Purchased Separately
Weight: 9.0 lbs.
Note: Quick installation with no drilling needed. Rock solid construction with a lifetime warranty. The RAM-VB-138 will not fit bench seat trucks. This base is not compatible with bench seat vehicles.
|
108.56 |
|
|
Compatible Vehicles:
Chevrolet Impala Police Package (2006-2013)
Placement of Mount:
Passenger side on the floor, under front seat
Drilling Requirements:
No-uses existing seat leg clips. For added support base can also be drilled to floor board.
Seat Configuration:
Bucket
Weight:
9 lbs.
Material:
Powder Coated Steel
Features:
Quick installation with no drilling needed. Rock solid construction with a lifetime warranty.
|
173.35 |
|
|
No-Drill™ Laptop Mount for the Chevrolet Avalanche, Silverado, Suburban, Tahoe, GMC Sierra, Yukon & Hummer H2
Compatible Vehicles:
Chevrolet Avalanche (2007-2013)
Chevrolet Silverado (2007-2013)
Chevrolet Silverado 1500 (2007-2013)
Chevrolet Silverado 2500HD (2007-2014)
Chevrolet Silverado 3500HD (2007-2014)
Chevrolet Suburban (2007-2014)
Chevrolet Tahoe (Front Bucket Seats Only) (2007-2014)
GMC Sierra (2007-2013)
GMC Sierra 1500 (2007-2013)
GMC Sierra 2500HD (2007-2014)
GMC Sierra 3500HD (2007-2014)
GMC Yukon (2007-2014)
Hummer H2 (2003-2011)
This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
Placement of Mount:
Passenger side floor board, in front of seat
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Material:
High Strength Composite and Powder Coated Steel
|
285.68 |
|
|
No-Drill™ Vehicle Base for '07-13 Chevrolet Silverado + More
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Placement of Mount:
Passenger side floor board, in front of seat
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Hole Pattern:
Seat Bolt Distance: 15"-15.5625" center to center
Pole:
Purchased Separately
Material:
Powder Coated Steel
Features:
Quick installation with no drilling needed. Rock solid construction with a lifetime warranty
Compatible Vehicles
Chevrolet
Avalanche (2007-2013)
Avalanche LS/LT/LTX (2009)
Silverado (2007-2013)
Silverado 1500 (2007-2013)
Silverado 1500 Hybrid (2008)
Silverado 1500HD (2008)
Silverado 2500HD (2007-2013)
Silverado 3500HD (2007-2013)
Suburban (2007-2014)
Suburban 12-Ton (2012)
Suburban 34-Ton (2012)
Tahoe (Front Bucket Seats Only) (2007-2014)
GMC
Sierra (2007-2013)
Sierra 1500 (2007-2013)
Sierra 1500 Denali (2012)
Sierra 1500 Hybrid (2008 2012)
Sierra 1500HD (2008)
Sierra 2500HD (2007-2014)
Sierra 2500HD Denali (2007-2012)
Sierra 3500HD (2007-2014)
Sierra 3500HD Denali (2007-2014)
Sierra Hybrid (2011)
Yukon (2007-2014)
Hummer
H2 (2003-2011)
|
118.24 |
|
|
RAM® No-Drill™ Laptop Mount f/ '19-21 RAM 1500
This RAM® No-Drill™ laptop stand system installs quickly and easily into the 2019 Dodge RAM 1500 using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation.
The spring-loaded RAM® Tough-Tray™ laptop holder accommodates 10” to 16” wide laptops, and 17” wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM® Tough-Tray™. In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM® mounting solutions.
Specifications:
Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board
Drilling Requirements: No - attaches to seat studs
Seat Configuration: Bucket
Material: High Strength Composite and Powder Coated Steel
Notes: If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit. Laptop base will fit under seat air duct in vehicles that have that option.
Compatible Vehicles
RAM
1500 (2019-2021)
|
216.88 |
|
|
No-Drill™ Laptop Mount Vehicle System for '17-20 Ford F-Series + More
This RAM® No-Drill™ laptop stand system installs quickly and easily into a variety of Dodge, Ford, and Jeep vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation. The spring-loaded RAM® Tough-Tray™ laptop holder accommodates 10” to 16” wide laptops, and 17” wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM® Tough-Tray™. In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM® mounting solutions.
Features:
Placement of Mount: Passenger side, in front, where seat frame meets floor board
Drilling Requirements: None. Utilizes existing vehicle mounting points and hardware
Seat Configuration: Bucket
Material: High Strength Composite and Powder Coated Steel
Custom, No-Drill™ mounting base offers lowest profile in the industry
Ball and socket mounting system offers shock and vibration dampening
Dual articulating swing arm offers the simplest and most comfortable adjustment points in the industry
Combination Telescoping pole adjusts both height and swing with one knob
Modular system makes changing your vehicle, or your device, simple and cost effective
Ability to mount laptops, tablets and other devices using the same mounting system
Universal Laptop Tray accommodates most laptops
Compatible Devices
10" to 16" Wide Laptops & (17" Wide Screens)
Compatible Vehicles
Dodge
Journey (2011-2020)
Ford
F-150 (2015-2020)
F-250-F-550 (2017-2020)
Escape (2013-2019)
Expedition (2018-2021)
Transit Connect (2014-2021)
C-Max (2014-2018)
Focus (2011-2018)
Raptor (2015-2020)
Jeep
Compass (2013-2021)
Patriot (2013-2017)
|
214.90 |
|