|
PUREWATER+All-In-One Water Filtration System 0.5 Micron Replacement Filters - 2-Pack
Features:
Simple filter change by twisting off faucet head simply dropping filter into cartridge without crawling under sink
On-demand ultra-clean tasting water from your tank
Elegantly styled
Simple to install
Compact filter housing maximizes under sink storage
|
49.91 |
|
|
Original Equipment Quality Replacement Tilt Trim Motor for Late Model Volvo Penta with Oildyne Pump - 2 Wire
Replacement tilt trim motor that will fit 6227, Late model Volvo Penta, w/Oildyne pump, 2-wire connection.
ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.
Features:
Tilt trim motors are dynamically tested to ensure out-of-the-box performance
Motor shafts induction case hardened at bearing surfaces for superior wear resistance
Epoxy Powder coated for maximum insulation protection
Warranty Information:
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration
Replaces:
VOLVO Tilt Trim Motor 3151278
VOLVO Tilt Trim Motor 3858071
VOLVO Tilt Trim Motor 854525-3
SIERRA Tilt Trim Motor 18-6805
SIERRA Tilt Trim Motor 18-6817
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
131.58 |
|
|
Sierra replacement thermostats for Johnson, Evinrude, BRP, Chrysler and Force outboards.
|
22.73 |
|
|
No-Drill Laptop Mount for the Chevrolet Silverado 1500/2500/3500, Suburban, Tahoe, GMC Sierra 1500/2500/3500
This No-Drill Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
Placement of Mount:
Passenger side floor board, in front of seat
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Material:
High Strength Composite and Powder Coated Steel
Features:
Quick installation with no drilling needed. Rock solid construction with a lifetime warranty.
Compatibility
Chevrolet
Colorado (2015-2021)
Silverado 1500 (2014-2018)
Silverado 1500 LD (2019)
Silverado 2500 (2014-2019)
Silverado 3500 (2014-2019)
Suburban (2015-2019)
Tahoe (2015-2020)
GMC
Canyon (2015-2021)
Sierra 1500 (2014-2018)
Sierra 2500/HD (2015-2019)
Sierra 3500/HD (2015-2019)
Yukon/Yukon XL (2015-2020)
|
338.51 |
|
|
Sierra oil seals for Volvo engines.
|
15.99 |
|
|
Sea Era
The SeaEra was designed to fit in small spaces and allows users to rotate the base in 90 degree increments when the floor space is oddly shaped or was designed for a manual toilet with a pump and long base. The “original” SeaEra has an integral intake pump so all connections are at the toilet. The SeaEra with integral pump has some design features that separate it from the competition. Our design separates the intake water from the discharge water by the full length of the motor. This ensures no possibility of cross contamination. Similar competitive units have the intake and discharge only separated by a seal which means a seal failure allows waste water back into the bowl. Another feature is the full size joker valve which provides better performance and substantially reduces the probability of clogs. This original design is only available in the SeaEra which Is the macerating base with an integral intake pump. The SeaEra QC offers the option of a remote intake pump or pressurized fresh water solenoid.
Engineering has developed a new built-in discharge fitting that can accept either 1-1/2" (38mm) or 1" (25mm) discharge lines without the need for an adapter. The SeaEra's discharge pump can handle a vented loop with a maximum height of five feet (1.52m) and utilizes a full-sized joker valve to help avoid clogging.
The inlet pump can lift water from four feet (1.22m) below the toilet and can be run dry without damaging the pump. To simplify a new installation or a retrofit, water can be routed from either side of the inlet pump using interchangeable 3/4" (19mm) hose barb fittings (two straight and one 90 Degrees), which are included.
Features:
Integral pump
Straight and 90º discharge
Household style bowl
Benefits
Uncompromising quality for the most demanding boaters
Economical electric macerating marine toilet
Simple and flexible installation for mounting above or below waterline
Bowl can be rotated 90 Degrees for mounting into confined spaces and retrofit mounting
Heavy-duty marine push-button switch included with all models
Pressurized freshwater models include vacuum breaker
Fits 1-1/2" (38mm) or 1" (25mm) discharge line with no adapters
Easy to clean and maintain
Can be run dry without damaging the pump
Low power consumption and quieter operation for on-board pressurized freshwater models
Can be used with on-board treatment systems (such as the Lectra/San®) and/or holding tanks
Each unit is assembled by hand, individually tested and backed by Raritan's one-year Limited Warranty and legendary technical support team
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
655.93 |
|
|
Sea Era
The SeaEra was designed to fit in small spaces and allows users to rotate the base in 90 degree increments when the floor space is oddly shaped or was designed for a manual toilet with a pump and long base. The “original” SeaEra has an integral intake pump so all connections are at the toilet. The SeaEra with integral pump has some design features that separate it from the competition. Our design separates the intake water from the discharge water by the full length of the motor. This ensures no possibility of cross contamination. Similar competitive units have the intake and discharge only separated by a seal which means a seal failure allows waste water back into the bowl. Another feature is the full size joker valve which provides better performance and substantially reduces the probability of clogs. This original design is only available in the SeaEra which Is the macerating base with an integral intake pump. The SeaEra QC offers the option of a remote intake pump or pressurized fresh water solenoid.
Engineering has developed a new built-in discharge fitting that can accept either 1-1/2" (38mm) or 1" (25mm) discharge lines without the need for an adapter. The SeaEra's discharge pump can handle a vented loop with a maximum height of five feet (1.52m) and utilizes a full-sized joker valve to help avoid clogging.
The inlet pump can lift water from four feet (1.22m) below the toilet and can be run dry without damaging the pump. To simplify a new installation or a retrofit, water can be routed from either side of the inlet pump using interchangeable 3/4" (19mm) hose barb fittings (two straight and one 90 Degrees), which are included.
Features:
Integral pump
Straight and 90º discharge
Marine style bowl
Benefits:
Uncompromising quality for the most demanding boaters
Economical electric macerating marine toilet
Simple and flexible installation for mounting above or below waterline
Bowl can be rotated 90 Degrees for mounting into confined spaces and retrofit mounting
Heavy-duty marine push-button switch included with all models
Pressurized freshwater models include vacuum breaker
Fits 1-1/2" (38mm) or 1" (25mm) discharge line with no adapters
Easy to clean and maintain
Can be run dry without damaging the pump
Low power consumption and quieter operation for on-board pressurized freshwater models
Can be used with on-board treatment systems (such as the Lectra/San®) and/or holding tanks
Each unit is assembled by hand, individually tested and backed by Raritan's one-year Limited Warranty and legendary technical support team
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
669.53 |
|
|
Premium Replacement Ignition Coil for Johnson/Evinrude Outboard Engines 1972-2006
This ignition coil fits 1972-2006, Universal Replacement Kit, Carbureted 2 Stroke Engines, 1 per Cyl.
Replaces:
Johnson / Evinrude Ignition Coil 584561
Johnson / Evinrude Ignition Coil 582106
Johnson / Evinrude Ignition Coil 583737
Johnson / Evinrude Ignition Coil 582366
Johnson / Evinrude Ignition Coil 581861
Johnson / Evinrude Ignition Coil 581862
Johnson / Evinrude Ignition Coil 581686
Johnson / Evinrude Ignition Coil 581997
Johnson / Evinrude Ignition Coil 582330
Johnson / Evinrude Ignition Coil 581998
Johnson / Evinrude Ignition Coil 581685
Johnson / Evinrude Ignition Coil 581819
Johnson / Evinrude Ignition Coil 582062
Johnson / Evinrude Ignition Coil 582062
SIERRA Ignition Coil 18-5176
*ARCO Assurance 12-month part and labor warranty protection
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
21.59 |
|
|
Sierra lower unit seal kit for Johnson, Evinrude and BRP outboard engines and OMC/Cobra sterndrive engines.
|
33.49 |
|
|
Sierra o-rings for various applications on outboard and inboard/outdrive engines.
|
1.01 |
|
|
Sierra hgh performance ignition coils for inboard and inboard/outdrive engines. Oil filled for better cooling and long life. Produces higher voltage needed to run larger spark plug gaps for added power and better fuel economy. Compatible with capacitive discharge systems.
|
112.68 |
|
|
Sierra hgh performance ignition coils for inboard and inboard/outdrive engines. Oil filled for better cooling and long life. Produces higher voltage needed to run larger spark plug gaps for added power and better fuel economy. Compatible with capacitive discharge systems.
|
107.60 |
|
|
Original Equipment Quality Replacement Tilt Trim Motor for Mercruiser I/O & Mercury O/B with Oildyne Pump
Replacement tilt trim motor that will fit Mercruiser I/O and Mercury Outboards with Oildyne pump. 12 Volt, Ring Terminal Ends
ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.
Features:
Tilt trim motors are dynamically tested to ensure out-of-the-box performance
Motor shafts induction case hardened at bearing surfaces for superior wear resistance
Epoxy Powder coated for maximum insulation protection
Warranty Information:
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration
Replaces:
MERCURY Tilt Trim Motor 17649
MERCURY Tilt Trim Motor 17649A1
MERCURY Tilt Trim Motor 17649A02
MERCURY Tilt Trim Motor 17649T
MERCURY Tilt Trim Motor 87828
MERCURY Tilt Trim Motor 891736T
SIERRA Tilt Trim Motor 18-6772
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
131.99 |
|
|
Premium Replacement Tilt Trim Motor for Late Model Mercruisers with Oildyne Pump
Replacement outboard tilt trim motor that will fit late model Mercruiser w/Oildyne pump, Ring Terminal Ends.
ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.
Features:
Tilt trim motors are dynamically tested to ensure out-of-the-box performance
Motor shafts induction case hardened at bearing surfaces for superior wear resistance
Epoxy Powder coated for maximum insulation protection
Warranty Information:
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration
Replaces:
MERCURY 14336A6
MERCURY 14336A8
MERCURY 14336A9
MERCURY 14336A12
MERCURY 14336A15
MERCURY 14336A17
MERCURY 14336A20
MERCURY 14336A25
MERCURY 14336A31
MERCURY 865380A03
MERCURY 865380A13
MERCURY 88183A5
MERCURY 88183A6
MERCURY 88183A8
MERCURY 88183A11
MERCURY 88183A12
MERCURY 88183A13
MERCURY 88183A25
SERRA 18-6769 / 18-6769-1
SIERRA 18-6813
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
425.99 |
|
|
52 MM (2-1/16") AcquaLink Transmission Oil Pressure 30 Bar/440 PSI - Black Dial & Bezel
AcquaLink realizes state-of-the-art solutions to provide customers with instantaneous and accurate nautical information. The instruments are designed for performance, with ease of use remaining an important attribute. The use of premium material - such as mineral glass lenses - guarantees the highest level of reliability and readability, as well as low energy consumption.
Features:
Maximum precision and the deployment of pioneering technologies are equally important as ease of use and stylish design.
AcquaLink components are made of high class materials, like mineral glass, stainless steel and aluminum.
All products are manufactured below ISO 9001 certified environment.
Our plug and play solution design concept offers a high level of installation flexibility.
A cross-platform standard offers maximum freedom in respect of cockpit customization.
We ensure seamless integration and optimum utilization of AcquaLink devices for extreme conditions at sea.
Harmonized dashboard look.
Technical Specifications:
Operating Range - +0 to +30 Bar /+0 to 400 PSI
Input Signal - EasyLink
Nominal Voltage -12 / 24 V
Color - Black/Aluminum
Installation Diameter - 52 mm (2-1/16")
Installation Depth - 50 mm
Lens - Mineral Glass - Anti-fog
IP Class - IPX6
Connector Type - AMP Superseal IP65 3-Pole
In the Box:
Gauge
Install/Safety Manual
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
27.59 |
|