R509C-LH CHIRP Transducer Features: Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) 25-Internal, Broadband Ceramic Elements Broadband / CHIRP / Spread Spectrum Operating frequencies: Low—Chirps from 28 kHz to 60 kHz High—Chirps from 130 kHz to 210 kHz Beamwidth (Adjustable): Low—23° to 9° High—8° to 4° 10 m (33’) cable, no connector Fast-response water-temperature sensor Boat size: 12 m (40’) and above Hull Type: Fiberglass, wood, or metal Exclusive Transducer ID® This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R509C-LHW CHIRP Transducer Features: Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) 25-Internal, Broadband Ceramic Elements Broadband / CHIRP / Spread Spectrum Operating frequencies: Low—Chirps from 28 kHz to 60 kHz High—Chirps from 130 kHz to 210 kHz Beamwidth (Adjustable): Low—23° to 9° High—8° to 4° 10 m (33’) cable, no connector Fast-response water-temperature sensor Boat size: 12 m (40’) and above Hull Type: Fiberglass, wood, or metal Exclusive Transducer ID® This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R509C-LM CHIRP 3KW Transducer Unlock the true potential of your fish-finder with the superior quality and performance of an AIRMAR Chirp-ready transducer. Features: Depth & fast-response water-temperature sensor Epoxy transducer housing with high-performance fairing For use on hulls up to 25° deadrise 82 kHz of total bandwidth from one transducer Benefits of Thru-Hull Transducers with High-Performance Fairing: The best performance on vessels 25 feet and up because the transducer face is in “clean” water below the boundary layer (bubbles running down the hull) The fairing compensates for hull deadrise and reduces turbulence over the transducer face, which allows tracking at speeds over 30 knots (35 MPH) When mounted in clean water (forward of propellers and running gear), thru-hulls produce the most effective signal return since nothing on the vessel interferes with the transducer’s active surface Specifications: Boat Size: 12 m (40 ft.) and above Hull Type: Fiberglass, wood, or metal Engine Type: Inboard, outboard or I/O Low (28 kHz to 60 kHz): 23° to 9° port/starboard 11° to 5° fore-aft beamwidth Maximum depth 10000 ft Medium (80 kHz to 130 kHz): 13° to 8° beamwidth Maximum depth 3000 ft. Bottom Coverage Relative to Frequency and Depth Depth (50 ft.): 10 ft. Depth (100 ft.): 24 ft. Depth (300 ft.): 68 ft. Depth (600 ft.): 136 ft. Depth (1000 ft.): 228 ft. Depth (1500 ft.): 340 ft. Depth (2000 ft.): 456 ft. Depth (2500 ft.): 570 ft. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Dock Edge "C" Guard Economy PVC Profiles 10ft. Roll - White This economy "C" Shape co-extruded Profile is made to exacting standards from Marine Grade PVC with UV Inhibitors and Fungicides. It will not crack or distort with temperature extremes. It comes in easy to install 10 Ft. coil. It can be used on flat surfaces as well as on pilings. Product Specifications: Part No.: 1132-F Description: "C" Guard Profile, (10 Ft/Roll), White WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Venus GX Control - No Display Features: Venus GX The Venus GX provides intuitive control and monitoring for all Victron power systems. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT solar chargers, BMV battery monitors, Lynx Ion + Shunt and more.  VRM Online Portal All readings are forwarded to our free remote monitoring website: the VRM Online Portal. To get an impression, try the demo on https://vrm.victronenergy.com. See also the screenshots below.  Remote Console on VRM The way to access the device for setting up, as well as monitoring, is via Remote Console. Either via VRM, via the built-in WiFi Access Point, or on the local LAN/WiFi network.  Automatic genset start/stop A highly customizable start/stop system. Use state of charge, voltage, load and other parameters. Define a special set of rules for quiet times, and optionally a monthly test run.  Data logging When connected to the internet, all data is sent to the VRM Portal. When there is no internet connection available, the Venus GX will store the data internally, up to 48 hours. By inserting a micro SD-card or USB stick, more data can be stored. These files can then be uploaded to the VRM Portal, or offline converted with the VictronConnect app, for analysis. Supported products - Multis and Quattros, including split-phase and three-phase systems. Monitoring and control (on/off and current limiter). Changing configuration is possible (only remotely via the internet, not without an internet connection). - EasySolar 1600VA - BlueSolar MPPT Solar Chargers with a VE.Direct port. - BlueSolar MPPT 150/70 and the MPPT 150/85 with VE.Can port. - SmartSolar MPPT 150/70 and the MPPT 150/100 with VE.Can port. When multiple BlueSolar MPPTs or SmartSolar MPPTs with VE.Can are used in parallel, all the information is combined as one. See also our blog-post about synchronizing multiple MPPT 150/70 solar chargers. - BMV-700 family can be connected directly to the VE.Direct ports on the Venus GX. Use the VE.Direct Cable for this. - BMV-600 family can be connected to the VE.Direct ports on the Venus GX. Requires an accessory cable. - Lynx Ion + Shunt - Lynx Ion BMS - Lynx Shunt VE.Can - Skylla-i battery chargers - NMEA2000 tank sensors - A USB GPS can be connected to the USB port. The data is sent to the VRM Portal for tracking purposes. The map on VRM will show the latest position. - Fronius PV Inverters When more than two VE.Direct products must be connected, USB can be used. Warranty Info WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Please contact your dealer for any returns, repairs or support issues related to this product.

TZ Navigator Weather Routing Module - Digital Download Navigate Safely & Efficiently Like all sailors know, the most direct route isn't always the best one. The new Routing Module now combines its revolutionary algorithm allowing you to calculate the optimal sailing route based on weather forecasts, currents, polars of your yacht and your own navigation style, with the powerful features of the former Advanced Routing Module to make one product. More performance in routing calculation The new Routing module offers accuracy and flexibility for the most demanding sailing conditions making the software routing calculation easier. It allows advanced sailors to manually control and adjust the weather file parameters in order to get more accurate results. It also introduces the variability notion, helping the skipper to identify the particular moments in the navigation where strategy choices are critical. Routing Module Features: Waves are used for routing computation along with wind and currents One click comparison between several routes and animations to evaluate multiple scenarios Option to pass a waypoint, leaving it Port or Starboard during multi waypoint routing computation Alternative Routing Routing variability calculation and display Weather File Adjustment Its use is more intuitive and user-friendly for recreational boaters, while offering multiple setting options for experienced sailors Routing variability calculation & display After having created a routing you can display on chart the variability.Variability's value allows identifying quickly important variation of wind direction and strength which require from the skipper a supplementary expertise of his forecasts, routing and sourcing files. The variability is equal to 100% if wind direction and strength are stable It will decrease to 80% if the routing shows important variations of the wind direction and strength. It indicates as well the weather transition for example a ridge with a gradient decreasing of pressure thus of wind Variability is symbolized in the Routing tree by a more or less strong display density (as it is shown in the picture above beside). Areas colored in Black indicate weather transitions. A very dense black corresponds to a variability < 70 % and it is thus necessary to cross it in the shortest after an analysis more refined and recalculating a new routing before changing criteria as well as modifying parameters and files sources Light areas show the "Corridors" where weather conditions are more stable depending to forecasts The ability to overlay both together variability and Sailset allows you to clearly view each transition of different ways (as ridge) across the routing. The Variability value is indicated in each line of the Routing center which corresponds to a time period of the weather routing. Weather File Adjustment It is possible to adjust the wind forecast data values, in order, for example, to take into account the hours or wind direction or wind speed, which has been prevailing in the zone for several days. Increase or decrease the wind speed (%): move the cursor along the slide bar to modify to increase or decrease the percentage Increase or decrease the wind speed (value): enter directly a value Change Weather File Time: enter a specific time HH:MM Change Weather File in Latitude and Longitude Change Weather File Direction Increase or decrease in percentage Waves and/or Current values

  There are plenty of benefits that come with starting a business, including having more flexibility and freedom with your schedule. For many individuals, however, the process of becoming an entrepreneur is a bit intimidating because it comes with so many questions.   The good news is, there are several opportunities and resources available for veterans these days that can make the path a little easier to travel. Start by reaching out to local businesses that are veteran-owned so you can network; forging a connection with a company like CLR Marine will give you some support as you start your journey. Then, think about how you can protect your business and grow your ideas at the same time.   Start with a sustainable idea   There are tons of business ideas out there, but only one will be perfect for you and your specific needs and skills. If you have the time and patience, you can build a company from the ground up based on something you enjoy doing, such as woodworking or baking. However, you might consider looking into a franchise, which includes benefits such as built-in branding that already has a customer following and a handbook for daily business operations. This is a great way to ease into the business world because it takes some of the pressure off your shoulders.   Look for funding   Once you have an idea of what sort of business you want to start, it’s time to look for funding. There are several resources available for veterans, but there may only be a few that are right for you. Decide whether you want to look for a loan or a grant, then do some research on which ones you qualify for. Keep in mind that some grants may depend upon the size of your business and whether you plan to have employees, while others factor in your years of service or whether you are living with a disability. It’s also important to note that there are many other resources available to help you cut down on costs and save money throughout the year.   Get some benefits   One resource available to all business owners is the formation of an LLC, or Limited Liability Company. This is a great way to add some protection to your company as well as some tax benefits, as Florida LLC owners aren’t required to pay state taxes on their business income. There are some other tax requirements, however, so it’s essential to find out the rules and regulations that are specific to the state of Florida. Read over the specific steps and guidelines for forming an LLC, and consider using a formation service that can help you get through the process with no issues.    It’s important to stay organized during this process, so create an area to safely file paperwork related to your business. Keep it separate from your personal files so there will be no confusion come tax-time.   Expand your education   One final consideration to make when you’re ready to start a business is how to expand upon your education. As a veteran, you already have an advantage in the business world due to your leadership skills and the ability to adapt to change, so now might be the time to focus on learning more about building a successful website or how to create a marketing plan. There are plenty of free educational opportunities for veterans online, including business classes and workshops, but you can also connect with other small business owners to learn how they’ve handled getting set up. Look for networking opportunities on social media and research more about how to create targeted ads on platforms like Facebook and Instagram to reach more customers.   Starting a business can be stressful, but you can minimize frustration by giving yourself plenty of time to set things up. By getting all your ducks in a row and staying organized, you can bring your business plan to fruition.   Ready to get in touch with CLR Marine? Fill out the contact us form or call 877-275-2576.   Kelli Brewer DeployCare.org   Photo via Pexels      

Join them live through a video webcasts September 29, 30 and October 1 http://epa.gov/greatlakes/live   Lake Michigan: State of the Lake and Great Lakes Beach Association Full agenda: http://aqua.wisc.edu/SOLM/   9:30 - 11:30 am Welcome and Opening Remarks 11:30 am – 1:00 The Collaboration Challenge, Maximizing the Economic Possibilities, Paul Linzmeyer and Sammis White 1:00 - 3:20 Rapid Assessment Methods and Predictive Models for Beach Management Moderator: Tom Edge 3:20 - 4:20 Socio-Economic Benefits of Green Infrastructure and LowImpact Development Moderator: Patty O'Donnell   Wednesday, September 30 7:30 - 9:40 Pathogens and QMRA Moderator: Sheridan Kidd Haack 10:00 - 12:00 Nutrient Management, TMDLs and Bacterial Source Tracking Moderators: Michael Sadowsky and Dean Maraldo 12:00-1:00 Milwaukee's Sustainable Future, Kevin Shafer, Director, Milwaukee MSD 1:00 - 1:40 Nutrient Management, TMDLs and Bacterial Source Tracking - Continued 1:40 - 4:20 Beach Restoration and Stormwater Management Session Chair:  Julie Kinzelman   Thursday, October 1 U.S. Areas of Concern Annual Meeting: Implementing Restoration Targets and Achieving On-The-Ground Results for the Great Lakes Full agenda: http://www.glc.org/rap/aocconference   9:00 - 9:30 Welcome and Opening remarks 9:30 - 10:45 Status Report on the U.S. Areas of Concern Program 11:00 - 12:00 President Obama's Great Lakes Restoration Initiative and Implications for Lake Michigan and the AOCs, Todd Ambs --------------------- Requirements: player for windows media files More information: http://epa.gov/greatlakes/live     Presentations from the State and Tribal Habitat/Species Workshops conducted in 2008 and 2009 as part of the Great Lakes Regional Collaboration's Habitat/Wetlands Initiative are now available online at: http://glrc.us/initiatives/wetlands/Workshops2008-2009.html.       As a side note: I thought everyone would be interested in reading this news release. Auctioning water in our lifetime…who would have thought it.   First Calif. auction will occur this fall (09/24/2009) In what is believed to be an unprecedented move, a Southern California water agency plans to auction off enough water in the Chino Basin this fall to supply about 70,000 homes for a year.   "Water in general has always been a very low-priced commodity, and I think the reality is, it's going to start catching up with other utilities. It's going to fluctuate with markets," said Ken Manning, chief executive of Chino Basin Watermaster, a quasi-public entity that manages the basin. "Whether that's right or wrong, I don't know. I just know where it's going."   Water sales are not uncommon in the state, especially in times of drought. But the water auction appears to be the first of its kind.   The Chino Basin is one of the largest groundwater basins in Southern California.   So far, there are expected to be three types of bidders, according to Manning: local water agencies, Southland developers who under state law must show there is enough water to supply new projects and private investment groups that deal in natural resources.   Chino Basin Watermaster plans to auction a total of 36,000 acre-feet, sold in four blocks, in the online auction, which will take place in November.   Manning said he believes the water will go for between $800 and $1,000 an acre-foot, or roughly $30 million. Underground storage in the basin will cost another $30 million.   "We think we're offering a reliable product. It's in the ground. So it will demand a higher price," he said (Bettina Boxall, Los Angeles Times, Sept. 24). – JK   Keeping You Informed CLR Marine

Tighten up security before you shop on Cyber Monday. Make sure all software on your computer and mobile device is up-to-date, including your OS, browser, and other apps. And if you don't already have it, install a cybersecurity program on your desktop and mobile device (whether it's a Mac or PC) that prevents malware infection to insure maximum coverage. Never Ever use debit cards to shop online. Do you want to give cybercriminals direct access to your bank account?  Banks are not like credit card companies. They will bounce your mortgage payment, your car payment and any other bill you have.  It usually takes about ten days or more to get things straightened out. By then you have real bills that are bouncing. Make sure you are on a secure connection. Look for the padlock icon to the left of the URL when you go to check out.  The URL should read “https” and not just “http. Do Not open Cyber Monday emails with attachments, Dump them in the garbage. Cyber Monday emails with attachments, especially zip files, are super suspect that they have malware attached to them.  Delete them immediately. Watch out for social media scams, especially on Facebook Go directly to a store's website instead of using search engines to look for deals. Delete any Pop-Up it could be redirecting you to a fake site    

    Purchasing and owning a boat is a major investment. If you want to get the most from your investment, you must keep your boat in working order and in good condition.   Many new boat owners don’t know how to keep up with maintenance. Fortunately, it’s not impractical if you understand what boat maintenance entails and develop a system. Below, CLR Marine discusses some maintenance essentials to prolong your boat’s lifespan and avoid safety issues on the water!   Engines   No component is perhaps more critical than your boat’s engine. Engine failure is not only inconvenient but can also be dangerous when you’re out on the water. That’s why it’s important to prepare and repair your engine while you’re on land and have access to the necessary parts.   There are many steps to checking and maintaining a boat engine, but here are a few of the most crucial ones   ●Replace all engine filters and fluids each year. ●Inspect all hoses and clamps, replacing them as needed. ●Inspect the fuel system for leaks or damage, and replace any components that are not in tiptop shape.  ●Regularly evaluate the ventilation and exhaust systems. ●Regularly inspect the raw water pump, replacing the rubber impeller once a year.  ●Closely evaluate hoses, cables, and any other engine components.   The easiest way to keep up with the responsibilities is to use PDF files to track, update, and share maintenance schedules and duties. Use this tool to add pages to a PDF and easily modify the document as needed.   Electrical Components   Your boat’s electrical system is also challenging to maintain when you’re already on the water. Avoid leaving the radio, light, or other electrical parts on for extended periods when the engine is running; otherwise, you could face a dead battery.   Inspecting the battery and cable connection for corrosion and other damage is also a good idea. Replace the battery, cables, breakers, switches, fuses, and any other parts that need it. Further, you’ll want to ensure all the lights are functioning and that you have quality jumper cables for emergencies.   Hull, Propeller, and Motor   It’s critical to check the hull, propeller, and motor to ensure they are in top condition. Fight the temptation to procrastinate on replacing any necessary components until next season. The last thing you want to do is forget and face problems on the water.   The propellers should be properly secured, straight, and undamaged. Ensure the hull doesn’t have any distortions, cracks, or blisters, and give it a good deep cleaning. While you’re at it, evaluate your anchor and its rode to confirm they are up to the task.   Safety Gear   The importance of having a good set of jumper cables for emergencies. Several other items are necessary to protect you and others on the water. Make sure you have the following safety equipment and that they’re in working order:   ●Life jackets ●Fire extinguishers ●Carbon monoxide detector ●A basic first aid kit   ●An emergency signal kit   Cosmetics   Finally, you want to ensure your boat looks the part. This means cleaning it regularly and winterizing it for the cold months. Also, Make sure you have the right to use the right supplies and tactics to keep your vinyl upholstery sparkling and free of mildew stains.   Don’t allow your investment to go to waste. Keeping up with boat maintenance is essential for keeping your boat safe, functioning, and attractive. Coming up with a schedule and a checklist can make the difference between enjoying a long-lasting boat and paying for expensive repairs.     Would you like to read more helpful content or browse our wide selection of marine supplies? Visit CLRMarine.com today!   Written By Kelli Brewer

WeatherLink for Vantage Pro2™ & Vantage Vue® For the ultimate in weather monitoring, add WeatherLink to your Vantage Pro2™ or Vantage Vue®. The data logger fits neatly into the weather station console or Weather Envoy, storing weather data even when its not connected to your PC. Later, download the data and use the software to create graphs, generate summaries, and more. Expanded Reporting: See current conditions at a glance on the instant weather bulletin. Graph data on a daily, weekly, or yearly basis. Or view multiple weather variables at the same time to see their relationships. Create Weather Watcher Reports in NOAA National Climatic Data Center Format View special reports on heating degree days, cooling degree days, and fuel-oil demand. With optional sensors, see reports on evapotranspiration, leaf wetness, soil moisture, soil temperature, sunburn risk for each skin type, and solar energy. Sharing Your Weather Data Help the National Weather Service develop improved weather prediction models by submitting your data to the Citizen Weather Observer Program via APRS or the Internet. Create your own weather website or post weather conditions to a LAN using our included HTML templates. Upload other files (such as images from a webcam) along with your weather data. Participate in The GLOBE Program, an international weather-related science program for students from elementary through high school, supported by NASA and NSF.

WeatherLink®, Windows, Serial Port Add WeatherLink to your Vantage Vue or Vantage Pro2. The data logger fits neatly into the weather station console or Weather Envoy, storing weather data even when it's not connected to your PC. Add this popular model of WeatherLink to any Vantage station or Weather Envoy. Suitable for everyone from the home weather buff to the most demanding scientific user. Store weather data even when it's not connected to a computer. Later, download the data and use the software for detailed analysis and graphing. Our popular WeatherLink with standard data logger is ideal for most purposes, while other models add special features designed for specific user groups. Features Expanded Reporting Graphs Graph data on a daily, weekly, or yearly basis Compare Data See current conditions at a glance with an instant weather bulletin or view multiple weather variables at the same time for comparison NOAA Create Weather Watcher Reports in NOAA National Climatic Data Center Format More Weather Data View weather information not available on the console, including heating degree days, cooling degree days, and fuel-oil demand Optional Sensor Reporting With optional UV and solar radiation sensors, get details on sunburn risk and solar energy Moon Phase With Vantage Pro2 and Vantage Vue, you can see the phase of the moon right on the console.But now even Perception and Weather Wizard III owners can view the phases of the moon using WeatherLink Sharing Your Weather Data Create Your Own Reports Data can be exported to most popular spreadsheets, databases, and word processing programs Weather Website Create a weather website or post weather conditions to a LAN. Add graphs, text lines, or scrolling ticker tapes, and upload other files (such as webcam images) along with weather data Citizen Weather Observer Program Submit your data to the National Weather Service to help develop improved weather prediction models The GLOBE Program Participate with other schools in the Global Learning and Observations to Benefit the Environment program, an international weather-related program for students from elementary through high school. Supported by NASA and NSF Includes Data logger Software on CD Download cable to connect the data logger to your computer Getting Started Guide and Online Help Specifications Compatibility Data logger fits neatly into all of the following models: Vantage Pro, Vantage Pro2, Vantage Vue, and Weather Envoy. Data Storage & Transfer User-Selectable Storage Interval. Choose 1, 5, 10, 15, 30, 60, or 120 minutes. Store up to six months' worth of data depending on the storage interval. (Up to four months for Perception or Weather Wizard III.) Standard Data Logger. Log and store data, even when the data logger is not connected to your PC. Transfer the data as often as you like, or leave the software running to transfer it automatically each day System Requirements Requires Windows XP and above with an available USB port

Major Rebuild Kit for Sherwood G-1009 This kit contains the following items   ON 509-0450 1 MOUNTING GASKET SH 10514C 1 LIP SEAL SH 10515C 1 SCREW & WASHER SH 10615K 1 IMPELLER KIT SH 10944 1 CAM BRASS LARGE CHRYSLER SH 12710 7 LOCKWASHER SH 12855 1 GASKET SH 12857 7 SCREW SH 12859 1 SEAL/SEAT ASSEMBLY SH 14161 2 EXT RETAINING RING SH 23448 2 BEARING SH 24629 1 SLINGER SH 25150 1 WEAR PLATE SH 4258 1 SNAP RING (SMALL) SH 4259 1 SNAP RING (LARGE) SH 4264 1 WASHER SH 4432 1 KEY SH 5133 1 SPACER      This kit is put together at time of order.

Radiance + 40" Light Bar - RGBW The stylish versatility of the RIGID Radiance light bars just got better. Now introducing Radiance+ RBGW light bars. The latest addition to the Radiance light family provides you with the ability to toggle between eight available backlight options with the flip of a switch: red, green, blue, light blue, purple, amber, white, or demo mode. The RIGID Radiance+ RGBW bars are built with the same high-grade aluminum alloy housing as RIGID's legendary E-Series but include a stylish color-changing backlight. Inside, the Radiance+ RGBW bars are feature-packed, with a black exposed circuit board and optimized forward-projecting Spot Drive optics that combine the attributes of a spot and a drive beam pattern. The Radiance+ RGBW light bars take customization to the next level. Own the night in style with Radiance+ RBGW lighting. Features: 8 backlighting options (red, green, blue, light blue, purple, amber, white, or demo mode) Backlighting is independently controlled using switch logic. Fits all E-Series light covers and mounts Black exposed printed circuit board 10-year warranty 9-15 V DC Black powder coat finish Pressure equalizing vent IP68 compliant - dust and water ingress High-grade aluminum alloy housing and heat sink Over/under voltage protection high-impact polycarbonate lens Mounting brackets are included RFI/EMI protection Rohs compliant Off-road use only Product Comes with: 40-inch Radiance+ RGBW light bar Harness Mounting brackets Media pack Specifications: Size (inch): 40"  Weight (Lbs): 11.30     Optics: Spot drive Watts: 179 Amp Draw: 12.8 Raw Lumens: 16632 Lux at 10m: 2595.99 Beam Distance at 1Lux: 509.5 Beam Distance at .25 Lux: 1019     Peak Beam Intensity (cd): 259599 Horizontal Beam Angle: 18.5

Vessel Data Recorder Includes M003029 VDR100 Maretron's Vessel Data Recorder (VDR100) is used to record messages transmitted from every product interconnected on the vessel's NMEA 2000® network. Each message is stored using solid-state memory technology with simple data retrieval via a removable USB flash drive. The supplied 16 Gbyte USB Flash Drive will hold weeks or more of data, and with the optional purchase of a larger USB Flash Drive, a year or more of data can be stored. And you never have to worry about losing the most recent data because the VDR100 uses a circular buffer where the oldest data is overwritten only after the entire memory is filled. Recorded vessel data can be used in many ways including performance analysis, vessel tracking, preventative maintenance, network diagnostics, warranty incident, and accident investigation, all in an effort to reduce operating cost and improve safety. As an example of how the recorded data might be used, consider an NMEA 2000® fuel flow monitor plugged into the network, which will provide a complete record of how much fuel was used and how fast it was used. With a GPS antenna/receiver plugged into the NMEA 2000® network, you will have a complete record of where the vessel has been including its speed and course over ground. Analyzing and graphing recorded data is done using a spreadsheet program like Microsoft® Excel®. Simply remove the USB Flash Drive and plug it into a PC or Mac and run Maretron's free extraction software (N2KExtractor®). Choose any or all of the recorded data including the associated dates and times and the program will create a comma delimited file (.csv) that can be read into a spreadsheet for graphing or any other type of data analysis. With the VDR100, you have a complete record of all the information produced by NMEA 2000® products connected to the vessel's network. And because the VDR100 is engineered and manufactured to the highest standards (IEC 60945 Maritime Navigation and Radio Communication Equipment), your data is safely protected in a compact waterproof housing. USB Flash Drives Depending on how much data you wish to record without overwriting older data, the following table can be used to determine the capacity of the USB Flash Drive you need. These figures are estimated assuming a 25% loaded system (approx 463 frames/second). Features: Data recorded on solid state memory via removable USB flash drive Circular buffer preserves latest recorded data while oldest data overwritten when memory is full Recorded data available for performance analysis, vessel tracking, preventive maintenance, and more Optional waterproof USB flash drive cover Free data extraction software (N2KExtractor®) builds comma delimited files for data analysis