|
13mm High-Load Trolley with 2X M4 Tapped Holes
This trolley features recirculating ball bearings housed in strong, lightweight, corrosion-resistant aluminum for dependable, low-friction linear travel. Use for moving loads and equipment, hoisting, and moving stage equipment, and architectural solutions.
Features:
High-load trolley with two M4-tapped holes on top
Torlon® ball bearings handle high loads, reducing friction so the trolley moves smoothly along the rail
Retaining clips keep ball bearings captive when the trolleys are removed for maintenance
Specifications:
Length (mm): 56 mm
Length (in): 2-3/16 in
Width (mm): 40 mm
Width (in): 1-9/16 in
Weight (g): 57 g
Maximum Rated Load (kN): 1.4 kN
Height (mm): 19 mm
Height (in): 3/4 in
Weight (oz): 2.01 oz
Breaking Load (kN): 6.7 kN
|
87.73 |
|
|
B Size Ball Add-On for 1.5" – 2" Torque™ Bases
Mount an additional device to your 1.5” – 2” Torque™ Rail Base with the RAM B Size Ball Add-On. Use the included hardware to easily attach the add-on to your Torque Rail Base. With an extra B Size Ball, you have the ability to mount multiple devices to your ATV or UTV, such as two action cameras or even two spotlights. The choice is yours and the possibilities are almost endless.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflecsts product packaged in a poly bag.
|
8.20 |
|
|
Intellian/KVH/Raymarine/Sea King/SeaTel Mounting Plate
With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68590 Vision Series Mounting Plate is designed for Intellian i4, k4, d4, Raymarine 45STV, Sea King 18, SeaTel C18 & C24, KVH M5 & TracPhone 50, & TV5.
Specifications:
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mounts sold separately
|
142.20 |
|
|
SUPRAX SUP Storage System - Dual Board Add-On
Stand Up Paddle Board Storage System
You've invested a lot of money into your beautiful boat. Why would you secure your SUP with ugly bungee cords? And that big board sure does take up valuable deck space. You need a storage system that is as stylish as the rest of your vessel.
Features:
Secure your board to your boat or your wall
061 Aluminum Alloy, sandblasted anodized
Heat press, diecut, EVA protective foam
Heavy duty shock cords keep boards in place
Fits 7/8" and 1" rails
Unique rotating clamp allows for mounting on angled stanchions
Dual Board Add-On Package Includes:
Two Add-On Racks for a Second Board - Sandblasted anodized 6061 aluminum with diecut EVA protective foam
Mounting Hardware & Bungee Cords - Easily attach racks to existing single rack system*, and secure with bungee cords
*Single Rack System (#50050) sold seperately
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
152.00 |
|
|
Offshore Sportfisherman First Aid Kit
Protection for your family and guests for all basic first aid needs. This kit contains all the necessities any offshore fisherman needs to prevent an early return to the dock. Orion has packed a full assortment of items into the waterproof case that can easily be mounted to the bulkhead.
Includes:
30 different items
165 total pieces
Adhesive strips (66 items)
CPR shock module (3 items)
Wound dressings (19 items)
Burn module (3 items)
Antiseptics and medicinals (67 items)
Additional items such as a cold pack, scissors, forceps, first aid instructions, latex exam gloves, and sterile eyewash
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
78.16 |
|
|
Add-On Instrument Pod - Uncut
Max Usable Face: 4.625" x 4.625"
Max Cut Out Area: 4.125" x 4.125"
This Seaview Accessory Pod can be mounted to Seaview Sail Pods, Deck Pods or Rail Pods. These Accessory Pods give you the flexibility to mount additional instruments.
Made from high quality marine grade UV resistant ABS plastic and is held together with tamper resistant security screws. A water tight gasket prevents water from intruding into the pod.
Depending on the size of your Sail Pod, Deck Pod or Rail Pod one to four Accessory Pods can be mounted.
|
120.00 |
|
|
Cruiser First Aid Kit
Perfect for the large boat cruiser to protect family and guests. The wall mounted waterproof case holds a larger selection of items to handle emergencies for the active boater.
Includes:
23 different items
158 total pieces
Adhesive strips (66 items)
Wound dressings (19 items)
Anticeptics and medicinals (67 items)
Additional items such as a cold pack, scissors, forceps, first aid instructions and latex exam gloves
|
47.99 |
|
|
Add-A-Snap - Black - 1-1/2"
For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
4.26 |
|
|
Add-A-Snap - Black - 4"
For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
4.49 |
|
|
Add-A-Snap - White - 2-1/2"
For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
4.42 |
|
|
Add-On Uncut Single Instrument Pod for Triton2
Max Usable Face: (5" x 5")
Max Cutout Area: (4.38" x 4.38")
This Seaview Accessory Pod can be mounted to Seaview Sail Pods, Deck Pods or Rail Pods. These Accessory Pods give you the flexibility to mount additional instruments.
Made from high quality marine grade UV resistant ABS plastic and is held together with tamper resistant security screws. A water tight gasket prevents water from intruding into the pod.
Depending on the size of your Sail Pod, Deck Pod or Rail Pod one to four Accessory Pods can be mounted.
|
144.00 |
|
|
Add-A-Battery
7650
The 7650 Add-a-Battery simplifies switching and automates charging for a complete two battery bank management solution.
A complete two battery bank management solution
Dual Circuit Plus™ Battery Switch isolates engine and house circuits, and combines battery banks for emergency starting
The 120 Amp SI ACR automatic charging relay combines for charging
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
149.92 |
|
|
7650 Add-A-Battery Kit - Boxed Packaging
The 7650 Add-a-Battery simplifies switching and automates charging for a complete two battery bank management solution.
Features:
A complete two battery bank management solution
Dual Circuit Plus Battery Switch isolates engine and house circuits, and combines battery banks for emergency starting
The 120 Amp SI ACR automatic charging relay combines for charging
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
154.85 |
|
|
V10-D104K 4 Gauge Add-A-Amp Kit for 1/0 Gauge Wire
If you've already installed a 1/0 AWG amplifier wiring kit in your boat, the T-Spec V10-D108K 4 AWG wiring kit will let you add another amplifier to your system. This water-resistant kit includes everything you need to send power to your new marine amplifier.
With 4 AWG wire, you'll get long life and maximum power transfer. This kit includes two brass distribution blocks, 10' power and ground wires, a 20' remote turn-on wire, installation hardware and wire ties for installation.
Does not include RCA cables or speaker wire.
Features:
Complete marine amplifier wiring kit
Includes power wire, ground wire, turn-on wire, circuit breaker, ring terminals, wire ties, and more
Marine-compliant cable
In the Box:
4 AWG pearl White OFC copper wire - 10'
4 AWG matte Grey OFC copper wire - 10'
18 AWG Blue wire - 10'
2 Distribution blocks w/snap-on covers (One 1/0 AWG input to 4 AWG ouptut)
Ten (10) 6" Wire ties
Two (2) 4 AWG crimp-on spade terminals (non-insulated)
One (1) 18 AWG crimp-on spade terminal (insulated)
One (1) 18 AWG crimp-connector
Four (4) 12 mm Phillips-head screws
Two (2) Insulating boots for 4 AWG spade terminals
Instruction sheet
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
111.12 |
|
|
V10-D108K 8 Gauge Add-A-Amp Kit for 4 Gauge Wire
If you've already installed a 4 AWG amplifier wiring kit in your boat, the T-Spec V10-D108K 8 AWG wiring kit will let you add another amplifier to your system. This water-resistant kit includes everything you need to send power to your new marine amplifier.
With 8 AWG wire, you'll get long life and maximum power transfer. This kit includes two brass distribution blocks, 10' power and ground wires, a 20' remote turn-on wire, installation hardware, and wire ties for installation.
Does not include RCA cables or speaker wire.
Features:
Complete marine amplifier wiring kit
Includes power wire, ground wire, turn-on wire, circuit breaker, ring terminals, wire ties, and more
Marine-compliant cable
In the Box:
8 AWG pearl White OFC copper wire - 10'
8 AWG matte Grey OFC copper wire - 10'
18 AWG Blue wire - 10'
2 Distribution blocks w/snap-on covers (One 4 AWG input to 8 AWG ouptut)
Ten (10) 6in Wire ties
Four (4) 8 AWG crimp-on spade terminals (non-insulated)
One (1) 18 AWG crimp-on spade terminal (insulated)
One (1) 18 AWG crimp-connector
Four (4) 12 mm Phillips-head screws
Two (2) Insulating boots for 8 AWG spade terminals
Instruction sheet
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
71.71 |
|