|
Scot Pump 189-001-157-3.75 IMPELLER 3.75" 48378 X&J
|
139.23 |
|
|
March 0155-0159-0500-2.75 Imp Mag Assy W/Ryton Bushin
|
329.68 |
|
|
Moeller waste tanks meet the material and pressure specifications for sanitation tanks as called out in federal regulations. Each tank features a nominal wall thickness of 0.30 in. (7.6 mm) to control odor which would otherwise permeate through the walls. Resin meets FDA spec CTF177 1520 requirements. Satisfies all U.S. Coast Guard standards. Provides standard NPT openings for vent, fill & drain. DROP SHIPPED DIRECT FROM FACTORY, FREIGHT NOT ALLOWED.
|
242.99 |
|
|
Water tank sizes ensures you the right fit for your boat. The resin used in Moeller each water tank meets FDA specs for polymers used in contact with food, which ensures safe, odor-free water. A multitude of water/waste tank sizes ensures you the right fit for your vessel needs. Feature nominal wall thickness of 0.300. Resin meets FDA spec CTF177 1520 requirements. Satisfies all U.S. Coast Guard standards. Provides standard NPT openings for vent, fill & drain. Polyethylene tanks will not filter taste into water or emit waste odors. DROP SHIPPED DIRECT FROM FACTORY, FREIGHT NOT ALLOWED. EXTENDED LEAD TIME MAY APPLY.
|
194.99 |
|
|
Manufactured from high-density polyethylene with UV inhibitors. Meets low permeation standards to satisfy EPA/CARB regulations, USCG and ABYC standards. Seamless one-piece construction with reserve fuel area designed into tank by means of a partitioned bottom. When gauge registers empty, simply tilt the tank to access reserve fuel supply. Features 90° fuel withdrawal assembly that rotates 360° to reduce fuel line kinks. Direct sight fuel gauge with glass lens, 2-stage self-venting fuel cap required by EPA/CARB.
|
147.99 |
|
|
Provides positive seal with exclusive injection molded 2-1/4" fill neck. High density polyethylene with UV-stabilized resin for guaranteed no-leak construction. Mechanically vented fuel cap with innovative easy-grip ribbed design that floats. Mechanical direct sight gauge with easy to read indicator. Features 90 degree 1/4 NPT fuel withdrawal elbow that rotates 360 degrees, eliminating kinked fuel hose. Designed for use in boats built pre-2011 EPA regulation with traditional kelch cap/site gauge option without barrier technology.
|
519.99 |
|
|
Water tank sizes ensures you the right fit for your boat. The resin used in Moeller each water tank meets FDA specs for polymers used in contact with food, which ensures safe, odor-free water. A multitude of water/waste tank sizes ensures you the right fit for your vessel needs. Feature nominal wall thickness of 0.300. Resin meets FDA spec CTF177 1520 requirements. Satisfies all U.S. Coast Guard standards. Provides standard NPT openings for vent, fill & drain. Polyethylene tanks will not filter taste into water or emit waste odors. DROP SHIPPED DIRECT FROM FACTORY, FREIGHT NOT ALLOWED. EXTENDED LEAD TIME MAY APPLY.
|
164.99 |
|
|
Water tank sizes ensures you the right fit for your boat. The resin used in Moeller each water tank meets FDA specs for polymers used in contact with food, which ensures safe, odor-free water. A multitude of water/waste tank sizes ensures you the right fit for your vessel needs. Feature nominal wall thickness of 0.300. Resin meets FDA spec CTF177 1520 requirements. Satisfies all U.S. Coast Guard standards. Provides standard NPT openings for vent, fill & drain. Polyethylene tanks will not filter taste into water or emit waste odors. DROP SHIPPED DIRECT FROM FACTORY, FREIGHT NOT ALLOWED. EXTENDED LEAD TIME MAY APPLY.
|
156.99 |
|
|
PP4400 PowerPod Uncut (Usable Face = 8.75"W x 6"H) (22.2cm W x 15.2cm H) - Carbon Black
PowerPods are designed for the serious boater who is blasting offshore. He demands the most from his boat and his electronics. He needs a tough and rugged mount to protect vital electronics from the harshest of offshore boating conditions. Sturdy and secure, yet clean and attractive, PowerPods are better than bracket mounting. Over 70 Pre-Cut PowerPods are available for all popular manufacturers products. 1.8" opening in the swivel tube provides plenty of room for running wires and connectors through. PowerPods are positioned at a 20 degree tilt back veiwing angle.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
Structural Rigidity
The Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it's potentially damaging effects on plastic. These NavPods are really strong!
Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.
Nickel Chrome Plated Stainless Steel
NavPod uses all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
Commitment to Quality
We are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty.
|
305.44 |
|
|
PED4400-C PedestalPod Uncut (Usable Face = 8.75"W x 6"H) (22.2cm W x 15.2cm H) - Carbon Black
PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your fishfinder/chartplotter from the harshest of wet boating conditions. PedestalPods provide the convenience of easily reaching and controlling the fishfinder/chartplotter while providing added security with protection from theft.
PedestalPods position your fishfinder/chartplotter at 20" off the deck and located near the bow and at the 45° angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor.
PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal keeping spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics.
Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look and provides protection for wires and electrical connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets.
NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft.
There are pre-cut models available for 7", 9" and 12" LCD displays from all major marine electronic manufacturers.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
305.44 |
|
|
975 MSD Portable Toilet with Mounting Brackets - 5 Gallon - Grey
Powerful flushing at the touch of a button sets the new 970 portable toilet series apart from the rest. Requires no manual pumping or batteries, yet delivers a robust bowl-clearing flush every time. The 9.8 L tank, with a tank level indicator, contains enough water for 27 flushes. When it is time to empty it, the extra-long discharge pipe is a sure safeguard against mess.
Just as convenient as a household toilet.
Due to an innovative product design this high-quality toilet offers powerful flushing with less pumping as well as splash-free operation and discharge. Easy to use push-button operation.
Features:
High-strength ABS construction withstands harsh environments; smooth, easy-to-clean finish
Prismatic tank level indicator allows easy tank level monitoring
Less mess due to an extra long pivoting discharge spout
Push-button flush clears bowl instantly
Full-size seat for comfort
Latching lid for security
Includes mounting brackets
Comes with Marine Sanitary Device (MSD) which allows toilet to be plumbed for direct overboard, dockside pump-out or remote tank discharge
Technical Specifications:
Color - Grey
Flush Method - Manual Handle
Capacity - 5 Gallon/18.9 L
Seat Close - Standard
Weight - 14 Pounds
Set Height - 15.25"
Size - 15.25" Depth x 15.25" Height x 13-2/16" Wide
Water Supply - Freshwater (self-contained)
Discharge - Spout on bottom of tank or MSD fitting kit
New Item # 9108552692
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
208.79 |
|
|
Moeller waste tanks meet the material and pressure specifications for sanitation tanks as called out in federal regulations. Each tank features a nominal wall thickness of 0.30 in. (7.6 mm) to control odor which would otherwise permeate through the walls. Resin meets FDA spec CTF177 1520 requirements. Satisfies all U.S. Coast Guard standards. Provides standard NPT openings for vent, fill & drain. DROP SHIPPED DIRECT FROM FACTORY, FREIGHT NOT ALLOWED.
|
214.99 |
|
|
Poly-Flex II 100 HP Universal Motor Cover - 25"L x 26"H x 19"W - Grey
Universal Motor Covers are a great option if you are upgrading your motor or simply need a replacement motor cover. Each motor cover has 1/4″ draw rope sewn into the hem for easy installation and snug fit.
Poly-Flex II
Good Quality
Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty).
|
30.84 |
|
|
Sun-DURA® 100 HP Universal Motor Cover - 25"L x 26"H x 19"W - Grey
Universal Motor Covers are a great option if you are upgrading your motor or simply need a replacement motor cover. Each motor cover has 1/4″ draw rope sewn into the hem for easy installation and snug fit.
Sun-DURA®
Excellent Quality
100% Solution Dyed Polyester means colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7oz. marine grade polyester that offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Our own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Made in USA and Imported. (7 Year Limited Warranty)
|
34.62 |
|
|
19 Gallon (72L) Waste Water Tank CPL Macerator - 12V
Complete waste water tank kit with pump ready to install.
Including a 72L (19 G) rectangular tank in reinforced polyethylene, waste water macerator pump 12V, gas vent, active carbon filter, control panel and probe for level control.
Linear low density polyethylene is the best suited material for holding tanks because of resistance to corrosion and odor permeation.
Specifications:
Weight: 25 kg/55 Lb
Dimensions: 700/27.5L x 300/11.8H x 400/15.75W mm/in
Type: Black water
*Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
559.96 |
|