Propeller for BOW125/130/160 Propeller 6 blade, diameter 246mm, for 125/130/160 kgf bow thrusters. Set includes all mounting hardware for propeller. Working in close collaboration with the Maritime Institute Netherlands (MARIN), the world-famous hydrodynamic laboratory, VETUS has optimized the performance of its thrusters. This has been achieved by utilizing a unique propeller blade profile, which creates little or no cavitation. As cavitation produces unwanted noise, this new blade design offers a major reduction in the operating sound levels for VETUS bow thrusters. Moreover, the application of this propeller has reduced the current consumption by up to 10%. *Zinc sold separately.

BOW PRO 651 Bow Thruster 65KGF - 12V Our BOW PRO thrusters are fitted with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has indefinite* run-time! The (AC) induction motor is controlled by the VETUS MCV motor controller. This in-house-engineered motor controller can handle both 12V, 24V and AC motors, making the new bow thruster suitable for almost all boats! The BOW PRO thruster is controlled by a proprietary CANBUS protocol. There are two different panels available for this thruster; one fully-proportional basic panel and one fully-proportional panel with lock-function. This allows the boat to be moored without the use of ropes. Letting passengers board your vessel have never been this easy! Evolution is to continue on a set of good properties, so there are similarities with its predecessors: remained are the very silent propeller blades and the streamlined tailpiece. Retrofitting a BOW PRO thruster, therefore, is a piece of cake as the new motor is interchangeable with the tailpiece and flange of our thruster range. Features: Range of Boat Size: 34ft - 36ft Thrust in pounds force: 143 lbs Motor horse power: 4 Tunnel- center line below the waterline: 185MM Voltage: 12V  Precision proportional control Endurance Rated Run-time - up to 10 minutes (dependant on model) at full power Maintenance-free brushless motor Sealed ingression protection construction - motor sealed for improved corrosion resistance in damp bilge environments Built-in over-temp and low battery voltage protection Suitable for high demanding applications (e.g. for use in rental & charter vessels) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

BOW PRO 301 Bow Thruster 30KGF - 12V The BOW PRO thrusters are fitted with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has indefinite* run-time! The (AC) induction motor is controlled by the VETUS MCV motor controller. This in-house-engineered motor controller can handle both 12V, 24V and AC motors, making the new bow thruster suitable for almost all boats! The BOW PRO thruster is controlled by a proprietary CANBUS protocol. There are two different panels available for this thruster; one fully-proportional basic panel and one fully-proportional panel with lock-function. This allows the boat to be moored without the use of ropes. Letting passengers board your vessel have never been this easy! Evolution is to continue on a set of good properties, so there are similarities with its predecessors: remained are the very silent propeller blades and the streamlined tailpiece. Retrofitting a BOW PRO thruster, therefore, is a piece of cake as the new motor is interchangeable with the tailpiece and flange of our thruster range. Features: Range of Boat Size: 20ft - 25ft Thrust in pounds force: 66 lbs Motor horse power: 2 Tunnel- center line below the waterline: 110MM Voltage: 12V  Precision proportional control Endurance Rated Run-time - up to 10 minutes (dependant on model) at full power Maintenance-free brushless motor Sealed ingression protection construction - motor sealed for improved corrosion resistance in damp bilge environments Built-in over-temp and low battery voltage protection Suitable for high demanding applications (e.g. for use in rental & charter vessels) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

BOW PRO 361 Bow Thruster 36KGF - 12V The BOW PRO thrusters are fitted with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has indefinite* run-time! The (AC) induction motor is controlled by the VETUS MCV motor controller. This in-house-engineered motor controller can handle both 12V, 24V and AC motors, making the new bow thruster suitable for almost all boats! The BOW PRO thruster is controlled by a proprietary CANBUS protocol. There are two different panels available for this thruster; one fully-proportional basic panel and one fully-proportional panel with lock-function. This allows the boat to be moored without the use of ropes. Letting passengers board your vessel have never been this easy! Evolution is to continue on a set of good properties, so there are similarities with its predecessors: remained are the very silent propeller blades and the streamlined tailpiece. Retrofitting a BOW PRO thruster, therefore, is a piece of cake as the new motor is interchangeable with the tailpiece and flange of our thruster range. Features: Range of Boat Size: 23ft - 28ft Thrust in pounds force: 80 lbs Motor horse power: 2 Tunnel- center line below the waterline: 125MM Voltage: 12V  Precision proportional control Endurance Rated Run-time - up to 10 minutes (dependant on model) at full power Maintenance-free brushless motor Sealed ingression protection construction - motor sealed for improved corrosion resistance in damp bilge environments Built-in over-temp and low battery voltage protection Suitable for high demanding applications (e.g. for use in rental & charter vessels) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

BOW PRO 421 Bow Thruster 42KGF - 12V The BOW PRO thrusters are fitted with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has indefinite* run-time! The (AC) induction motor is controlled by the VETUS MCV motor controller. This in-house-engineered motor controller can handle both 12V, 24V and AC motors, making the new bow thruster suitable for almost all boats! The BOW PRO thruster is controlled by a proprietary CANBUS protocol. There are two different panels available for this thruster; one fully-proportional basic panel and one fully-proportional panel with lock-function. This allows the boat to be moored without the use of ropes. Letting passengers board your vessel have never been this easy! Evolution is to continue on a set of good properties, so there are similarities with its predecessors: remained are the very silent propeller blades and the streamlined tailpiece. Retrofitting a BOW PRO thruster, therefore, is a piece of cake as the new motor is interchangeable with the tailpiece and flange of our thruster range. Features: Range of Boat Size: 25ft - 30ft Thrust in pounds force: 93 lbs Motor horse power: 4 Tunnel- center line below the waterline: 125MM Voltage: 12V  Precision proportional control Endurance Rated Run-time - up to 10 minutes (dependant on model) at full power Maintenance-free brushless motor Sealed ingression protection construction - motor sealed for improved corrosion resistance in damp bilge environments Built-in over-temp and low battery voltage protection Suitable for high demanding applications (e.g. for use in rental & charter vessels) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Bow Thruster 7512D 75KGF-12V-D185MM VETUS bow thruster with 75 kgf thrust force, suitable for boats from 10.5M to 15M in length. 12V version. Features A single propeller creates less flow disturbance in the tunnel The VETUS unique propeller blade design minimizes cavitation noise The use of a flexible coupling between tail piece and motor eliminates vibration All VETUS systems use a streamlined tail piece for optimum flow A strong synthetic propeller eliminates corrosion and reduces weight Systems are easy to install, supplied with clear installation and operation instructions VETUS systems use a new line of high quality aluminium control panels which are interchangeable with older panels All VETUS manoeuvring systems meet the EMC requirements This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Bow Thruster - 95 kgf - 12V The Vetus 95 kgf is suitable for yachts and powerboats from 39 to 56 feet in length. Manufactured using the highest quality materials to give high power and long service life. Features: A single propeller creates less flow disturbance in the tunnel Unique propeller blade design minimizes cavitation noise Spiral gears minimize transmission noise Flexible coupling between tail piece and motor eliminates vibration Streamlined tail piece for optimal flow Strong synthetic propeller eliminates corrosion and reduces weight Easy to install, supplied with clear installation and operation instructions All Vetus maneuvering systems meet the EMC requirements This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Set spare 6 blade prop D 185mm f/BOW45/80, until '98 This is a 6 bladed propeller suitable as replacement for the BOW45/80, until '98 Working in close collaboration with the Maritime Research Institute Netherlands (MARIN), the world-famous hydrodynamic laboratory, VETUS has optimised the performance of its thrusters. This has been achieved by utilising a unique propeller blade profile, which creates little or no cavitation. As cavitation produces unwanted noise, this new blade design offers a major reduction in the operating sound levels for VETUS bow thrusters. Moreover, the application of this new propeller has reduced the current consumption by up to 10%.

VETUS Bow Thruster Zinc Washer Anode Set - 25 KGF with Hardware VETUS Bow Thruster Zinc Washer Anode. Specifically 25 KGF with Hardware

VETUS Bow Thruster Zinc Washer Anode Set - 75/95 KGF with Hardware  VETUS Bow Thruster Zinc Washer Anode. Specifically 75/95 KGF with Hardware.

VETUS Bow Thruster Zinc Cone Propeller Nut Anode Set 125/130/160 KGF with Hardware VETUS Bow Thruster Zinc Cone Propeller Nut Anode. Specifically for 125/130/160 KGF with Hardware.

BOW PRO 761 Bow Thruster 76KGF - 12V The BOW PRO thrusters are fitted with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has indefinite* run-time! The (AC) induction motor is controlled by the VETUS MCV motor controller. This in-house-engineered motor controller can handle both 12V, 24V and AC motors, making the new bow thruster suitable for almost all boats! The BOW PRO thruster is controlled by a proprietary CANBUS protocol. There are two different panels available for this thruster; one fully-proportional basic panel and one fully-proportional panel with lock-function. This allows the boat to be moored without the use of ropes. Letting passengers board your vessel have never been this easy! Evolution is to continue on a set of good properties, so there are similarities with its predecessors: remained are the very silent propeller blades and the streamlined tailpiece. Retrofitting a BOW PRO thruster, therefore, is a piece of cake as the new motor is interchangeable with the tailpiece and flange of our thruster range. Features: Range of Boat Size: 35ft - 39ft Thrust in pounds force: 167 lbs Motor horse power: 6 Tunnel- center line below the waterline: 185MM Voltage: 24V  Precision proportional control Endurance Rated Run-time - up to 10 minutes (dependant on model) at full power Maintenance-free brushless motor Sealed ingression protection construction - motor sealed for improved corrosion resistance in damp bilge environments Built-in over-temp and low battery voltage protection Suitable for high demanding applications (e.g. for use in rental & charter vessels) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

BOW PRO 571 Bow Thruster 57KGF - 12V The BOW PRO thrusters are fitted with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has indefinite* run-time! The (AC) induction motor is controlled by the VETUS MCV motor controller. This in-house-engineered motor controller can handle both 12V, 24V and AC motors, making the new bow thruster suitable for almost all boats! The BOW PRO thruster is controlled by a proprietary CANBUS protocol. There are two different panels available for this thruster; one fully-proportional basic panel and one fully-proportional panel with lock-function. This allows the boat to be moored without the use of ropes. Letting passengers board your vessel have never been this easy! Evolution is to continue on a set of good properties, so there are similarities with its predecessors: remained are the very silent propeller blades and the streamlined tailpiece. Retrofitting a BOW PRO thruster, therefore, is a piece of cake as the new motor is interchangeable with the tailpiece and flange of our thruster range. Features: Range of Boat Size: 28ft - 34ft Thrust in pounds force: 125 lbs Motor horse power: 4 Tunnel- center line below the waterline: 150MM Voltage: 24V  Precision proportional control Endurance Rated Run-time - up to 10 minutes (dependant on model) at full power Maintenance-free brushless motor Sealed ingression protection construction - motor sealed for improved corrosion resistance in damp bilge environments Built-in over-temp and low battery voltage protection Suitable for high demanding applications (e.g. for use in rental & charter vessels) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Bow Thruster - 45 kgf - 12V Features: A single propeller creates less flow disturbance in the tunnel Unique propeller blade design minimizes cavitation noise Spiral gears minimize transmission noise Flexible coupling between tail piece and motor eliminates vibration Streamlined tail piece for optimal flow Strong synthetic propeller eliminates corrosion and reduces weight Easy to install, supplied with clear installation and operation instructions All Vetus maneuvering systems meet the EMC requirements This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Bow Thrusters from Quick and Vetus Bow thrusters make docking easier, since they allow the captain to turn the vessel to port or starboard side, without using the main propulsion engine.   Use our Shipping Cost and Time Estimator on the Shopping Cart page of CLR Marine. You will need to add the item to the cart to get an estimate. We ship Monday-Friday (excluding Holidays and some weather days) and almost always ship same day when your order is placed before 2:30 PM Eastern Time if in stock.