|
Deck Eye Hole Center - 24mm
This deck eye is made from 316 stainless steel. It underwent multiple machining and finishing operations to ensure that they were free of damaging sharp corners and burrs.
Specifications:
Height: 5mm
Width Between Centers of Holes: 24mm
Hole Diameter: 4.5mm
Weight: 0.001kg
|
5.39 |
|
|
PP4900-02 PowerPod Pre-Cut f/Humminbird ONIX Series 8.4" ONIX8ci - Carbon Black
The PP4900 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the p032.01future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long
lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
|
427.62 |
|
|
Genoa Car - Fits 25mm (1") T Track
Features a precision-turned Ertalyte sheave, through-bolted for extra strength. The positive action plunger mechanism has an easy-grip knob
A popular range of Genoa cars and sliders designed to run on a 25mm (1") 'T' track. All are manufactured from high-quality marine grade aluminum with our unique 'Spectro' grey anodized finish for added protection.
Features:
'Spectro' grey anodized finish
Anodized and supplied in metric lengths
The stainless steel plunger stops with positive action
Molded nylon slide inserts ensure free running
Large, easy-grip plunger knobs
Heavy-duty Genoa car options
Variety of applications on larger dinghies, dayboats, and light cruisers/racers
Cars and sliders are compatible with all makes of 'T' track
Modified slider inserts available for obscure sizes
25mm 'T' Section Track
Drilled for fastenings and plunger stops
Specifications and Dimensions:
Length: 80mm (3.15")
Width: 42mm (1.65")
Height: 87mm (3.43")
Sheave Ø: 40mm (1.57")
Max Rope Ø; 2 x 12mm (2 x 0.47")
Break Load: 2,280kg (5,026.54lbs)
SWL: 1,140kg (2,513.3lbs)
Weight: 247g (0.54lbs)
|
93.61 |
|
|
Deck Eye Hole Center - 28mm
This deck eye is made from 316 stainless steel, and it went through multiple machining and finishing operations to ensure that it is free of damaging sharp corners and burrs.
Specifications:
Weight: 0.001kg
Height: 9mm
Width Between Center of Holes: 28mm
Hole Diameter: 3.5mm
|
4.45 |
|
|
Deck Eye Hole Center - 42mm
This deck eye is made from 316 stainless steel, and it went through multiple machining and finishing operations to ensure that it is free of damaging sharp corners and burrs.
Specifications:
Weight: 0.001kg
Height: 14mm
Width Between Center of Holes: 42mm
Hole Diameter: 5mm
|
7.34 |
|
|
Deck Eye Hole Center - 31mm
This deck eye is made from 316 stainless steel, and it went through multiple machining and finishing operations to ensure that it is free of damaging sharp corners and burrs.
Specifications:
Weight: 0.001kg
Height: 10mm
Width Between Center of Holes: 31mm
Hole Diameter: 4.5mm
|
4.88 |
|
|
Towable Genoa End & Becket - Fits 25mm(1") T-Track
Length:88mm
Width:37mm
Height:50mm
Sheave Diameter:35mm
Max Rope Diameter:8mm
Break Load:N/A
Safe Working Load:N/A
Weight:121g
A popular range of genoa cars and sliders designed to run on 25mm (1") 'T'
track. All are manufactured from high quality marine grade aluminium and
finished with our unique
'Spectro' grey anodised finish for added protection.
All cars and sliders have moulded nylon inserts to ensure free, smooth
running under load and prevent damage to finish or potential corrosion.
'Spectro' grey anodised finish
Stainless plunger stops with positive action
Moulded nylon slide inserts ensure free running
Large, easy-grip plunger knobs
|
38.08 |
|
|
RDS-Series PRO 40" Spot LED - Black
RIGID revolutionized the lighting industry with the introduction of the RDS-Series, and recent advancements in LED technology have made them more powerful than ever before with the RDS-Series PRO, Professional Race Output. With an improved output of up to 70% more raw lumens, the RDS-Series PRO projects more usable light exactly where it's needed on the road ahead. By taking an E-Series light bar and treating it to a gentle arc, the RDS-Series PRO provides a sleek, integrated look with the curved windshields and bumpers on today's trucks and SUVs. The curve is for more than just looks, it is also functional: the arc of the RDS-Series PRO light bars provides a wider spread of LED light, providing unmatched lighting coverage with a single light bar. RDS-Series PRO also includes updated branding and blacked-out circuit boards for a more refined look.
Features:
Family: RDS - Series | PRO
Optics: Hybrid - SpotLED
Color: Cool White
Finish Color: Black
Length: 40"
Mount Type: Surface
Shipping Dimensions: 6" × 43.25" × 6"
Product Weight: 12.404lb
Sold As: Single
Emits a 10° cone of light from each LED. Unmatched output for wider spread
Certified IP-68 for water & dust intrusion
Certified to MIL-STD-810G for shock/ vibration
Unbreakable polycarbonate lens
UV & Abrasion resistant powder coat.
Custom two-bolt mounting system for adjustability and strength.
Unmatched Output & Efficiency
Specifications:
Watts: 176
Amp Draw: 12.57
LED's: 80
Raw Lumens: 63360
Lux @ 10M: 1948.09
Beam Distance: 441.4M
Peak Beam Intensity: 194809 cd
|
1503.41 |
|
|
Flexible T-Handle Latch - Black
Features:
Material: Nylon/Rubber
Finish: Natural
Color: Black
Thread-Hole Type: 10 - 24
Mounting Style: Concealed Mount
Southco offers modifications to our standard products, explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.
|
14.47 |
|
|
RDS-Series PRO 30" Spot Curved - Black
RIGID revolutionized the lighting industry with the introduction of the RDS-Series, and recent advancements in LED technology have made them more powerful than ever before with the RDS-Series PRO, PROfessional Race Output. With an improved output of up to 70% more raw lumens, the RDS-Series PRO projects more usable light exactly where it’s needed on the road ahead.
By taking an E-Series light bar and treating it to a gentle arc, the patented RDS-Series PRO provides a sleek, integrated look with the curved windshields and bumpers on today’s trucks and SUVs. The curve is for more than just looks, it is also functional: the arc of the RDS-Series PRO light bars provides a wider spread of LED light, providing unmatched lighting coverage with a single light bar.
RDS-Series PRO also includes updated branding and blacked-out circuit boards for a more refined look. It’s all about stealth with RIGID’s new Midnight Optics. Utilizing our exclusive spot optic with a transparent black enamel coating, our Midnight Optics take the subtle “blacked out” look seriously featuring black oxide hardware. The Midnight Optics enable RIGID to “disappear” during the day while still providing powerful LED technology to light up the night. Thanks to improved LED technology, the Midnight Edition now offers more light output than ever before. Midnight Optics are available in E-Series, RDS-Series and D-Series product lines.
Features:
E-Series Housing with a Gentle Arc
GORE® Pressure Equalizing Vent
Harness & Switch Included (Exclusions Apply)
High-Grade Aluminum Alloy Heatsink
IP68 Compliant -Dust / Water Ingress
50,000+ Hour Lifespan
9-36 V DC
Patented Technology
Impact Resistant Polycarbonate Lens
Integrated Thermal Management System
Included:
2 Black Powder Coated, L-shape brackets
Open Leads, No Connector
Harness w/Switch
∗ Sold as an Individual
|
1237.50 |
|
|
SR-Q Series PRO Driving Surface Mount Black Light
The SR-Q PRO is a sleek low-profile lighting option that packs more lighting output than ever before thanks to recent improvements to the advanced LEDs inside. The SR-Q PROfessional Race Output now emits up to 102% more raw lumens, depending on optic. An excellent choice for any application where space is limited, the SR-Q PRO makes auxiliary lighting professional grade. A single row of LEDs and is available in multiple beam patterns, including Spot, Flood, Driving, Hyperspot, and Diffused. Other recent updates to the SR-Q PRO include updated RIGID branding and blacked-out circuit boards for a more refined look. Both surface and flush mount options are available and there are multiple mounting capabilities, such as the Suction Cup Mount and Angled Flush Mounts, just to name a few. The SR-Q PRO is also a perfect backup light and is available as a Back-Up Light Kit with a 25’ harness and a three-position switch for ease of wiring and usage.
Features:
50,000 Plus Hour Lifespan
9-36 V DC
Durable UV Resistant Powder Coat
High-Grade Aluminum Alloy
Integrated Thermal Management System
Impact Resistant Polycarbonate Lens
Over/Under Voltage Protection
RFI/EMI Protection
Reverse Polarity Protection
RoHS Compliant
IP68 Compliant - Dust/Water Ingress
Operating Temp -40 Deg F To +145 Deg F
SAE J575 Compliant - Shock/Vibration
Available In White And Black Housing
Pressure Equalizing Vent
Waterproof Connector (Exclusions Apply)
Limited Lifetime Warranty
Off Road Use Only
What's Included?
Mounting Hardware
Stainless Steel, U-Shape Bracket (Excludes FM)
Solid Black Light Cover (Excludes FM)
Harness w/Switch
Deutsch Connector
*Sold as a Single
|
181.10 |
|
|
XTM 9 DI 25 T Trolling Motor Mount Transducer
Trolling Motor Mount Transducer
Down Imaging™/DualBeam Plus™, 75°/45°, 455/800 kHz (DI) and 25°/16°, 200/455 kHz, with built in temperature, 15' Cable. Low profile design minimize snags. Easy installation, all hardware included.
For Use With:
700 Series, 788ci HD DI Combo
500 Series, 597ci HD DI Combo, 596c HD DI, 587ci HD DI, 581i HD DI, 571 HD DI, 570 DI, 561 DI
300 Series, 386ci DI Combo, 385ci DI Combo, 346c DI Combo, 345c DI Combo
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
163.63 |
|
|
Towable Genoa Car - Fits 25mm(1") T-Track
Towable genoa cars
With tow eye or sheave in place of plunger, allowing a control line to be lead aft so that genoa car adjustments can be made from the cockpit. Use in conjunction with end fittings shown.
Length:170mm
Width:42mm
Height:87mm
Sheave Diameter:40mm
Max Rope Diameter:2 x 12mm
Break Load:2,280kg
Safe Working Load:1,140kg
Weight:297g
A popular range of genoa cars and sliders designed to run on 25mm (1") 'T' track. All are manufactured from high quality marine grade aluminium and finished with our unique
'Spectro' grey anodised finish for added protection.
All cars and sliders have moulded nylon inserts to ensure free, smooth running under load and prevent damage to finish or potential corrosion.
'Spectro' grey anodised finish
Stainless plunger stops with positive action
Moulded nylon slide inserts ensure free running
Large, easy-grip plunger knobs
|
128.95 |
|
|
T-Handle Latch - Black Flexible Rubber w/Keeper
Small Size (50 Series) is 112mm (4.81") when latched
These flexible handle latches adapt well to alignment irregularities in field use. But no matter how they are mounted or latched, their non-corrosive non-conductive UV-resistant thermoplastic elastomer handles provide consistent vibration-absorbing benefits for quiet and secure closure.
The flexible, black thermoplastic elastomer handle is enhanced with a variety of additional features and options to provide smooth trouble-free performance under real-world conditions.
Built-in drag keeps latch handle stationary when unlatched
Curved T-handle style provides sure grip for operating latch
Different sizes and mounting styles accommodate a range of panel thicknesses
Indented keeper ensures positive latching
Provides intuitive ease of operation
Completely non-corrosive materials
Standards and Specifications
Flammability Rating: UL94-HB
Industry Applications
Automotive, Trucks
Construction Equipment, Off-Road Vehicles, Farm Equipment
Exhibits/Signs
Food Equipment
Industrial Machinery, Machine Tools, Metal Cutting
Lawn/Garden Equipment
Marine
|
8.35 |
|
|
D-Series PRO - Flood LED - Pair - Black
One of RIGID's most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter Professional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID's advanced Spot, Flood, or Driving optics, so there's a D-SS PRO lighting solution for nearly any application. The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.
Features:
Optics: Hybrid - Flood
LED Color: White
Finish Color: Black / Black
Mount Type: Surface
Shipping Dimensions: 6 × 8 × 6 in
Product Weight: 2.12 lb
Sold As: Pair
Hybrid Optics
20° Flood Pattern
50,000+ Hr LED Lifespan
Instant On / Off - No Warm Up
RoHS Compliant
Over / Under Voltage Protection
Cast Aluminum Housing
Durable Polycarbonate Lens
Integrated Thermal Management
GORE® Pressure Equalizing Vent
Designed, Engineered, & Assembled in the USA
Sealed Deutsch Connector
Specifications:
Watts: 30
Amp Draw: 2.14
LED's: 4
Raw Lumens: 3168
Lux @ 10m: 58.19
Beam Distance: 76.3 m
Peak Beam Intensity: 5819 cd
|
216.29 |
|