|
Smart Tabs II Series Trim Tabs 16 X 10 f/23-30' Boats - 6500lbs Max
IMPROVES YOUR BOATS OVERALL PERFORMANCE - GUARANTEED!!!
If these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.
Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self adjust and performance better for less money?
Designed for boats 23' - 30' weighing up to 6500 lbs The ST 1610 Series is ideal for low profile Fiber Glass, Aluminum, and RIB design boat with transom widths less than 10 feet (trailerable boats). This heavy duty system provides an active suspension system for the boat that increases stability and smooths the ride even in rough seas. Easier planning at slower speeds, increased payload performance, improved tracking and handling are available automatically without the need for pilot interface. No switches, no electric or hydraulic connections, and no maintenance. Just get in and go!
Specially designed for boats between 23' and 30", under 10' in width, and up to 8,500 Lbs gross weight. The ST1610 series features two nitrogen gas actuators per plate providing increased stern lift and twice the reactive dampening, eliminating any instant changes from water pressure variances. This fully automatic and active system provides smooth and undetectable reaction to boat speed, and water conditions creating a level more comfortable ride.
Our breakthrough technology in trim tabs is completely automatic requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.
Reduce the minimum planning speed by up to 33%
Faster Acceleration
Increase top speed
Provide a level, more comfortable ride at lower speeds
Improve fuel economy, handling and safety
NO HYDRAULICS - NO ELECTRIC SWITCHES
Nauticus trim tabs are completely automatic requiring no operator adjustment while underway.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.(see installation instruction).
SPEED REGULATION
Nauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.
Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizontal position eliminating any drag.
BOAT STABILIZERS
Even when cruising SMART TABS continue to work like shock absorbers. The constant adjustment to sea conditions allow SMART TABS to provide remarkable stability in turns, while crossing waves, while cruising, and while running at maximum speeds. No more sliding, porpoising, or chine walking.
ONE OF A KIND
The unique system is the only one of its kind in the industry. The internal valve system is truly "smart" in its design of controlling you boats performance.
It will reduce the minimum planning speed by 33%
Provide a level, more comfortable ride at lower speeds
Improve economy, handling and safety
As the boat speed increases, the water pressure also increases. Once the water pressure exceeds the Actuator load rating (maximum LIFT period) the trim plates begin to move upward until they are horizontal with the bottom of the boat.
The internal valve system dampens the trim plate movement which eliminates any instant reaction to minor water pressure variances. Nauticus trim tabs provide smooth and undetectable reaction to boat speed creating a level, more comfortable ride at lower speeds.
INSTALLATION IS SIMPLE
With an electric drill, small drill bit, a phillips screwdriver, and two wrenches, just about anyone can install SMART TABS in less than an hour. Professional installers should be able to install SMART TABS in 30 minutes or less.
All mounting hardware, instructions, and templates are included.
SMART TABS require NO THROUGH HULL DRILLING
|
237.46 |
|
|
Smart Tabs II Series Trim Tabs 16 X 10 f/23-30' Boats - 8500lbs Max
IMPROVES YOUR BOATS OVERALL PERFORMANCE - GUARANTEED!!!
If these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.
Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self adjust and performance better for less money?
Designed for boats 23' - 30' weighing up to 6500 lbs The ST 1610 Series is ideal for low profile Fiber Glass, Aluminum, and RIB design boat with transom widths less than 10 feet (trailerable boats). This heavy duty system provides an active suspension system for the boat that increases stability and smooths the ride even in rough seas. Easier planning at slower speeds, increased payload performance, improved tracking and handling are available automatically without the need for pilot interface. No switches, no electric or hydraulic connections, and no maintenance. Just get in and go!
Specially designed for boats between 23' and 30", under 10' in width, and up to 8,500 Lbs gross weight. The ST1610 series features two nitrogen gas actuators per plate providing increased stern lift and twice the reactive dampening, eliminating any instant changes from water pressure variances. This fully automatic and active system provides smooth and undetectable reaction to boat speed, and water conditions creating a level more comfortable ride.
Our breakthrough technology in trim tabs is completely automatic requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.
Reduce the minimum planning speed by up to 33%
Faster Acceleration
Increase top speed
Provide a level, more comfortable ride at lower speeds
Improve fuel economy, handling and safety
NO HYDRAULICS - NO ELECTRIC SWITCHES
Nauticus trim tabs are completely automatic requiring no operator adjustment while underway.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.(see installation instruction).
SPEED REGULATION
Nauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.
Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizontal position eliminating any drag.
BOAT STABILIZERS
Even when cruising SMART TABS continue to work like shock absorbers. The constant adjustment to sea conditions allow SMART TABS to provide remarkable stability in turns, while crossing waves, while cruising, and while running at maximum speeds. No more sliding, porpoising, or chine walking.
ONE OF A KIND
The unique system is the only one of its kind in the industry. The internal valve system is truly "smart" in its design of controlling you boats performance.
It will reduce the minimum planning speed by 33%
Provide a level, more comfortable ride at lower speeds
Improve economy, handling and safety
As the boat speed increases, the water pressure also increases. Once the water pressure exceeds the Actuator load rating (maximum LIFT period) the trim plates begin to move upward until they are horizontal with the bottom of the boat.
The internal valve system dampens the trim plate movement which eliminates any instant reaction to minor water pressure variances. Nauticus trim tabs provide smooth and undetectable reaction to boat speed creating a level, more comfortable ride at lower speeds.
INSTALLATION IS SIMPLE
With an electric drill, small drill bit, a phillips screwdriver, and two wrenches, just about anyone can install SMART TABS in less than an hour. Professional installers should be able to install SMART TABS in 30 minutes or less.
All mounting hardware, instructions, and templates are included.
SMART TABS require NO THROUGH HULL DRILLING
|
237.46 |
|
|
Groco S-84 Tie Rod, Monel .5 X 12.125
|
188.44 |
|
|
Replacement Portlight Lens Only - 5" x 12" - Smoke
Replacement lens only for Beckson Opening Ports
Features:
5" x 12"
Smoke
|
61.33 |
|
|
5" x 12" x 2" Self Drain™ Opening Port
The Beckson Self Drain™ Opening Port is innovatively designed with an angled drainage ramp molded on the inside of the spigot. This design promotes drainage without having the hassle of making angled cuts in the hull. This also allows for thru-bolting, which is impossible in windows where an angled spigot extends below the bolt holes. The internal angle seats tightly against the gasket and lens, thus omitting an exterior water retention ledge present in most other ports. (No water-fall when you open the port after a rain.) Self Drain™ Opening Ports are ideal for mounting where installation is within 15° of vertical (with spigot length up to one inch). Longer spigots are available for vertical installations. For greater angles use Beckson Rain Drain™ Ports.
|
193.73 |
|
|
5" x 12" x 1" Self Drain™ Opening Port
The Beckson Self Drain™ Opening Port is innovatively designed with an angled drainage ramp molded on the inside of the spigot. This design promotes drainage without having the hassle of making angled cuts in the hull. This also allows for thru-bolting, which is impossible in windows where an angled spigot extends below the bolt holes. The internal angle seats tightly against the gasket and lens, thus omitting an exterior water retention ledge present in most other ports. (No water-fall when you open the port after a rain.) Self Drain™ Opening Ports are ideal for mounting where installation is within 15x of vertical (with spigot length up to one inch). Longer spigots are available for vertical installations. For greater angles use Beckson Rain Drain™ Ports.
|
193.73 |
|
|
Hawk Wind Indicator for Boats up to 8M - 10"
The Hawk is the original Hawk Wind Indicator and sets the standard by which all Wind Indicators are judged. Lightweight with a balanced vane arm and the Hawk "V" jewel bearing surface this is the ultimate in Wind Indicator technology. The Vane arm is made from tough Nylon giving good rigidity and UV Protection. The support rod is high grade aluminum allowing it to be bent if required or straightened should it be knocked or damaged. The easily removable mast clip can be mounted either vertically or horizontally and is easily removed without tools. Adjust and lock the reference arms at any angle for quick, at a glance indication or either gybing or tacking angles.
Specifications:
Vane Arm Length 27cm (10.6")
Overall Height 28cm (11")
Overall Weight 25 grams
|
50.62 |
|
|
Sun-DURA® 5 HP Universal Motor Cover - 18"L x 10"H x 12"W - Grey
Universal Motor Covers are a great option if you are upgrading your motor or simply need a replacement motor cover. Each motor cover has 1/4″ draw rope sewn into the hem for easy installation and snug fit.
Sun-DURA®
Excellent Quality
100% Solution Dyed Polyester means colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7oz. marine grade polyester that offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Our own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Made in USA and Imported. (7 Year Limited Warranty)
|
18.04 |
|
|
Poly-Flex II 5 HP Universal Motor Cover - 18"L x 10"H x 12"W - Grey
Universal Motor Covers are a great option if you are upgrading your motor or simply need a replacement motor cover. Each motor cover has 1/4″ draw rope sewn into the hem for easy installation and snug fit.
Poly-Flex II
Good Quality
Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty).
|
16.06 |
|
|
Rub Rail Mounted Navigation Lights for Boats Up To 30' - Port & Starboard Included
TACO's latest addition to its Rub Rail offering is the Rub Rail Mounted LED Navigation Light. These sleek, low-profile lights are mounted onto a heavy gauge Stainless Steel cover designed to fit several of Taco Marine's most popular Rigid Vinyl Rub Rail profiles that are ideal for 18' to 30' boats.
Features & Benefits:
3-Watt Port (Red) and Starboard (Green) LEDs
Low-draw, less than 0.25 Amperes
Enables more deck space
Easy installation
Stainless Steel
High Polish
Reliable long-life LEDs will increase hours of maintenance-free service
Designed to fit the popular Taco Marine V21-9659, V21-9904, V21-9909, and V21-9959 Rub Rail profiles
For use on up to 30' boats
112.5° unobstructed view, with less glare
Meets ABYC-USCG requirements
Low-voltage 12-14VDC
Anodized aluminum heat sink for maximum heat dissipation
LED lights are mounted in a heavy gauge polished Stainless Steel joiner cover
Water-resistant, IP68 rating
Takes a 1" - #8 Stainless Steel fastener (not included)
Kit Includes:
Set of two LED navigation light assemblies, Port (Red) and Starboard (Green)
Installation Instructions
|
160.38 |
|
|
6 x 9 ft. Grey Sun Shade for Boats Up To 28'
Sebba Shade stands out with its versatile design, providing a large coverage area and multiple positioning capabilities. This lightweight and easy-to-use shading solution not only offers convenience but also surprises with its unexpected functionality—it doubles as a floatie, making it an ideal companion for various outdoor activities.
Inflatable: Easy setup/take down,
Portable: Used only when needed and comes with easy storage.
Air Frame: Uses a high-pressure airframe instead of a metal frame.
Easy Usage: No permanent hardware or professional installation is required.
Quality: High quality, durable construction. Blocks 98% of harmful UVA/UVB rays.
Risk-Free: Try for 30 days, and return it for a full refund if not satisfied.
Pump Sold Separately: Works with any high PSI (above 7-8 PSI) pump, such as a "kiteboarding pump" or a "stand-up paddleboard pump."
Features:
Mildew-resistant, abrasion-resistant, tear-resistant marine-grade fabric
Easily moved or tilted to block the sun
Easy set up (no poles, no drilling needed)
Straps & clips included
Inflates in 2 minutes with a standard standup paddleboard (SUP) style pump (not included)
Fasten to an existing T-top, arch, or bimini
Specifications:
Color: Grey
Fits: Boats from 17 ft to 28 ft
Dimensions Inflated: 6’-4” x 9’-4”
Dimensions Deflated: 22” x 8” x 12”
Weight: 11 lbs.
Max Speed: Safely handles speeds up to 45 mph
|
990.00 |
|
|
6 x 9 ft. Blue Sun Shade for Boats Up To 28'
Sebba Shade stands out with its versatile design, providing a large coverage area and multiple positioning capabilities. This lightweight and easy-to-use shading solution not only offers convenience but also surprises with its unexpected functionality—it doubles as a floatie, making it an ideal companion for various outdoor activities.
Inflatable: Easy setup/take down.
Portable: Used only when needed and comes with easy storage.
Air Frame: Uses a high-pressure airframe instead of a metal frame.
Easy Usage: No permanent hardware or professional installation is required.
Quality: High quality, durable construction. Blocks 98% of harmful UVA/UVB rays.
Risk-Free: Try for 30 days, and return it for a full refund if not satisfied.
Pump Sold Separately: Works with any high PSI (above 7-8 PSI) pump, such as a "kiteboarding pump" or a "stand-up paddleboard pump."
Features:
Mildew-resistant, abrasion-resistant, tear-resistant marine-grade fabric
Easily moved or tilted to block the sun
Easy set up (no poles, no drilling needed)
Straps & clips included
Inflates in 2 minutes with a standard standup paddleboard (SUP) style pump (not included)
Fasten to an existing T-top, arch, or bimini
Specifications:
Color: Blue
Fits: Boats from 17 ft to 28 ft
Dimensions Inflated: 6’-4” x 9’-4”
Dimensions Deflated: 22” x 8” x 12”
Weight: 11 lbs.
Max Speed: Safely handles speeds up to 45 mph
|
990.00 |
|
|
6 x 9 ft. Black Sun Shade for Boats Up To 28'
Sebba Shade stands out with its versatile design, providing a large coverage area and multiple positioning capabilities. This lightweight and easy-to-use shading solution not only offers convenience but also surprises with its unexpected functionality—it doubles as a floatie, making it an ideal companion for various outdoor activities.
Inflatable: Easy setup/take down.
Portable: Used only when needed and comes with easy storage.
Air Frame: Uses a high-pressure airframe instead of a metal frame.
Easy Usage: No permanent hardware or professional installation is required.
Quality: High quality, durable construction. Blocks 98% of harmful UVA/UVB rays.
Risk-Free: Try for 30 days, and return it for a full refund if not satisfied.
Pump Sold Separately: Works with any high PSI (above 7-8 PSI) pump, such as a "kiteboarding pump" or a "stand-up paddleboard pump."
Features:
Mildew-resistant, abrasion-resistant, tear-resistant marine-grade fabric
Easily moved or tilted to block the sun
Easy set up (no poles, no drilling needed)
Straps & clips included
Inflates in 2 minutes with a standard standup paddleboard (SUP) style pump (not included)
Fasten to an existing T-top, arch, or bimini
Specifications:
Color: Black
Fits: Boats from 17 ft to 28 ft
Dimensions Inflated: 6’-4” x 9’-4”
Dimensions Deflated: 22” x 8” x 12”
Weight: 11 lbs.
Max Speed: Safely handles speeds up to 45 mph
|
990.00 |
|
|
6 x 9 ft. Seafoam Sun Shade for Boats Up To 28'
Sebba Shade stands out with its versatile design, providing a large coverage area and multiple positioning capabilities. This lightweight and easy-to-use shading solution not only offers convenience but also surprises with its unexpected functionality—it doubles as a floatie, making it an ideal companion for various outdoor activities.
Inflatable: Easy setup/take down.
Portable: Used only when needed and comes with easy storage.
Air Frame: Uses a high-pressure airframe instead of a metal frame.
Easy Usage: No permanent hardware or professional installation is required.
Quality: High quality, durable construction. Blocks 98% of harmful UVA/UVB rays.
Risk-Free: Try for 30 days, and return it for a full refund if not satisfied.
Pump Sold Separately: Works with any high PSI (above 7-8 PSI) pump, such as a "kiteboarding pump" or a "stand-up paddleboard pump."
Features:
Mildew-resistant, abrasion-resistant, tear-resistant marine-grade fabric
Easily moved or tilted to block the sun
Easy set up (no poles, no drilling needed)
Straps & clips included
Inflates in 2 minutes with a standard standup paddleboard (SUP) style pump (not included)
Fasten to an existing T-top, arch, or bimini
Specifications:
Color: Seafoam
Fits: Boats from 17 ft to 28 ft
Dimensions Inflated: 6’-4” x 9’-4”
Dimensions Deflated: 22” x 8” x 12”
Weight: 11 lbs.
Max Speed: Safely handles speeds up to 45 mph
|
990.00 |
|
|
6 x 9 ft. Camo Sun Shade for Boats Up To 28'
Sebba Shade stands out with its versatile design, providing a large coverage area and multiple positioning capabilities. This lightweight and easy-to-use shading solution not only offers convenience but also surprises with its unexpected functionality—it doubles as a floatie, making it an ideal companion for various outdoor activities.
Inflatable: Easy setup/take down.
Portable: Used only when needed and comes with easy storage.
Air Frame: Uses a high-pressure airframe instead of a metal frame.
Easy Usage: No permanent hardware or professional installation is required.
Quality: High quality, durable construction. Blocks 98% of harmful UVA/UVB rays.
Risk-Free: Try for 30 days, and return it for a full refund if not satisfied.
Pump Sold Separately: Works with any high PSI (above 7-8 PSI) pump, such as a "kiteboarding pump" or a "stand-up paddleboard pump."
Features:
Mildew-resistant, abrasion-resistant, tear-resistant marine-grade fabric
Easily moved or tilted to block the sun
Easy set up (no poles, no drilling needed)
Straps & clips included
Inflates in 2 minutes with a standard standup paddleboard (SUP) style pump (not included)
Fasten to an existing T-top, arch, or bimini
Specifications:
Color: Camo
Fits: Boats from 17 ft to 28 ft
Dimensions Inflated: 6’-4” x 9’-4”
Dimensions Deflated: 22” x 8” x 12”
Weight: 11 lbs.
Max Speed: Safely handles speeds up to 45 mph
|
990.00 |
|