|
B175L Bronze Low Profile Thru Hull 20° Tilted Element Transducer 1kW
Features
Material: Bronze
For use with CP450C or CP470 Chirp Sonar Module
Power (RMS): 1Kw
Max Depth(ft): 2,500
Frequency (khZ): 40-60
Beam Width(L/H): 32°-21°
Records: Depth / Temperature
Approved Hull Material: Fiberglass / Wood
Cable Length (Ft/M): 33ft / 10M
Supported Deadrise / Transom Angles: 16-24° Deadrise
Note: Using a Single B175 or B75 requires the A80328 Single Operation Cable
|
1663.03 |
|
|
250C/50/200ST-CX Transom Mount Transducer
SI-TEX 250C/50/200ST-CX Transom Mount Transducer for the CVS-126 and CVS-128.
|
180.60 |
|
|
SI-TEX 307/50/200T Transducer f/CVS-832
Dual Frequency 50/200 kHz
Max Power: 1kW
Beam Angle: 22 x 45 deg. @ 50 kHz, 6 x 11 deg. @ 200 kHz
Housing: Bronze
Mount: Through Hull
Plug: 8 pin
Cable: 30'
Temp: Yes
Speed: No
For SI-TEX model: CVS862, 832C, 833C, Genesis
|
197.99 |
|
|
B164-20 20° 1kW Tilted Element Transducer with 6-Pin Connector
Features:
Depth/Temp
50/200 kHz
1 kW RMS
High-performance
Bronze
Step up to a 1kW without a Fairing!
Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1101.13 |
|
|
B60 Thru-Hull Transducer 20° Tilt 9-Pin for Navico xSonic
The B60 is a 600W, 50/200 kHz transducer that integrates Airmar’s popular, Tilted Element™ feature. This Tilted Element transducer has the ceramic element fixed at a 20° angle within the housing. When the transducer is installed almost flush with the hull, the tilt of the element corrects for the hull deadrise angle. Orienting the beam directly down ensures maximum echo returns to the transducer for more accurate depth readings.
Features:
Depth and fast-response water temperature sensing
600 W of power
Dual-frequency element:
50 kHz with a wide 45° beamwidth for depth performance to 353 m (1200')
200 kHz with a 12° beamwidth for depth performance to 206 m (700')
Perfect for center-console or trailered boats
Low-profile bronze housing extends only 5 mm (3/16") outside the hull
No effect on your boat’s running performance
Bronze housing for fiberglass or wood hull
Also available in a stainless steel housing (SS60) for use with all hull materials
Specifications:
Power Rating: 600 W
Max Deadrise Angle: 24°
Housing: Bronze
Functions: Depth, Temperature
Hull Material: Fiberglass or wood
Max Vessel LOA: Up to 8 m (26')
Hole Size: 60 mm (2-3/8")
Usable Shaft Length: 68.5 mm (2.70")
Acoustic Window: Urethane
Common Use: Leisure/Yachting, Fishing
Conventional Beam: 45°/12°
Max Deadrise: Up to 24°
Max Depth: Low frequency- 366 m (1200'), High frequency- 206 m (700')
Mounting Style: Tilted Element Thru-Hull
Retractable housing: No
Single or Dual Frequency: Conventional Dual Frequency
Tilted Element: Yes
Weight: 1.4 kg (3 lbs.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
348.71 |
|
|
B164-12 12° 1kW Tilted Element Transducer with 6-Pin Connector
Features:
Depth/Temp
50/200 kHz
1 kW RMS
High-performance
Bronze
Step up to a 1kW Without a Fairing!
Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1101.13 |
|
|
B164 Tilted Element
0 degree tilted version
Features:
Depth/Temp
50/200 kHz
High-performance
Bronze
Step up to a 1kW Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
B164 12 degree 1kW Tilted Element
Step up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted
Element™ technology to a higher power. The new 1kW, flush-mount, tilted
element transducers are perfect for fast, trailered tournament sport fishing
vessels who cannot have a high-performance fairing. The flush mounted,
bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can
sit on trailer rollers and bunks with no damage at all. The ceramic arrays
are tilted inside the housing giving you the perfect vertical beam with
maximum energy on what is directly below your boat. Take your fishfinder to
the next power with 1kW tilted element transducers.
12 degree tilted version for 8 to 15 degree hull deadrise
Compatible with Lowrance HDS Series and Simrad NSE Series Multifunction Display units.
Features:
Depth/Temp
50/200 kHz
1 kW RMS
High-performance
7 pin Blue Connector
Bronze
12 degree
|
1140.00 |
|
|
B164 Tilted Element™ 10 Pin
12°
Features:
Depth/Temp
50/200 kHz
1 kW RMS
High-performance
Bronze
Step up to a 1kWWithout a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1061.33 |
|
|
B164 Tilted Element™
12 degree titled version is designed for 8 degree - 15 degree deadrise angles
For use with Raymarine DSM250 or DSM300 sounder modules
Features:
Depth/Temp
50/200 kHz
1 kW RMS
High-performance
Bronze
Step up to a 1kWWithout a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.
|
1192.01 |
|
|
B164 Tilted Element™
0°
Features:
Depth/Temp
50/200 kHz
1 kW RMS
High-performance
Bronze
Step up to a 1kW Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.
|
1239.98 |
|
|
Bronze 12 degrees tilt-element thru-hull w/temp for 8 degrees to 15 degrees hull deadrise (Beam angle:45 degrees @50kHz,12 degrees @200kHz)
|
420.00 |
|
|
xSonic SS75M 20° Tilted Element TH Transducer - 600W - Stainless Steel
The SS75M is a Stainless Steel, thru-hull, tilted, medium-frequency (80-130kHz), depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.
Medium Frequency: CHIRP range is 80kHz-130kHz for good target detail in shallow water and excellent bottom tracking in deep water.
The 20° tilt is ideal for boats with a 16° to 24° hull deadrise.
|
772.92 |
|
|
xSonic SS175H-W/20 Stainless Steel Chirp Transducer - 20° 1KW Tilted Element - 9 Pin Connector
SS175H-W/20 CHIRP Transducers enable bottom detection down to 300m+ with 5 to 10 times greater detail and Resolution so precise it's possible to distinguish between individual bait Fish, game Fish, and underwater structures.
*This Transducer is designed for smaller boats up to 36 feet (11 m).
Features
Frequencies: 130-210 kHz @ 25° constant beamwidth
16° - 25° Deadrise
300m+ Usable Depth
6m+ or large Boat size with Steel or Aluminum hulls
Depth & Temperature
CHIRP Technology
High-Performance
Stainless Steel
Exclusive Transducer ID
9-Pin Connector, 10M Cable
|
1458.80 |
|
|
SS164 Stainless Steel Thru-Hull - 0° Tilted Element - 1KW for CP370 Sounder
Step up to a 1 kW—without a fairing! Airmar’s innovative Tilted Element™ technology to a higher power. The 1 kW, flush-mount, tilted element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot accomodate a high-performance fairing. The flush-mounted, stainless steel housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks. The ceramic arrays are tilted inside the housing providing the perfect vertical beam with maximum energy on what is directly below the boat.
Features:
Depth and fast-response water-temperature sensor
1 kW power for performance to 500 m (1640'), 50 kHz with a wide 22° beam, 200 kHz with a 6° beam
Interfaces to any 600 W or 1 kW echosounder
Engineered for center-console and trailered boats
Low-profile protrusion - less than 6.35 mm (0.25") outside your hull
Fixed 0° tilted version for 0° to 7° hull deadrise
No affect on boats running performance
Stainless steel transducer housing for use on all hull materials
Recommended boat size: up to 11 m (35')
Exclusive Xducer ID® technology
|
1344.98 |
|