Spun Silver 2" Voltmeter (10-16 VDC) Perimeter-lighted Silver dial with bold Black graphics, polished stainless steel bezel, contoured Black pointer, and domed glass lens.  A voltmeter indicates the battery voltage and the general condition of the battery charging system. The meter requires no warm-up and indicates voltage changes instantly. 2"- Hole Size: 2.0625" (53mm)  Specifications: Domed, Scratch Resistant Lens Stainless Steel Bezel LED Illuminating around the Perimeter of the Dial Factory P/N VP92223 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Euro Black 2" Voltmeter (20-32 V)  Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.  A voltmeter indicates the battery voltage and the general condition of the battery charging system. The meter requires no warm-up and indicates voltage changes instantly. 2" - Hole Size: 2.0625" (53mm) Specifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life Perimeter-lighted Black dial Can be adapted for 24 VDC systems Factory P/N VP9191 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Coral 2" Voltmeter (10-16 VDC) Perimeter-lighted Black dial with stylish White and Blue graphics, Black aluminum bezel with burnished leading edge, contoured White pointer and flat glass lens. A voltmeter indicates the battery voltage and the general condition of the battery charging system. The meter requires no warm-up and indicates voltage changes instantly. 2" - Hole Size: 2.0625" (53mm) Specifications: Scratch Resistant Lens Black Aluminum Bezel Contoured White Pointer Factory P/N VP9106 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Platinum 2" Voltmeter (10-16 VDC) Faria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.   All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment.   A voltmeter indicates the battery voltage and the general condition of the battery charging system. The meter requires no warm-up and indicates voltage changes instantly. 2" - Hole Size: 2.0625" (53mm) Specifications: Domed Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Blue LED Illuminating around the Perimeter of the Dial Illuminated Backlit Fire-Orange Tip Pointer Factory P/N VP7179 *Sold as an Individual *Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Professional Red 2" Voltmeter (10 to 16 AMPS) Perimeter-lighted black dial with stylish Red and White graphics, Black aluminum bezel, tear- drop White pointer, and flat glass lens. A voltmeter indicates the battery voltage and the general condition of the battery charging system. The meter requires no warm-up and indicates voltage changes instantly. 2"- Hole Size: 2.0625" (53mm) Specifications: Flat Glass Anti-fog, Scratch Resistant Lens Black Aluminum Bezel LED Illuminating around the Perimeter of the Dial White Tear Drop Pointer Factory P/N VP7042 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Newport SS 2" Voltmeter - 10 to 16V The Newport Stainless Steel (SS) family of marine gauges is a classic style of gauge, engineered to be the new Modern Retro.   Designed with the latest fog resistant features, this Retro Style gauge far surpasses all expectations.  Perimeter lighting makes reading these gauges easy to read Day/Night.  Features:  Perimeter lighted Retro White Dial Black and Gray Graphics  Domed fog resistant lens  Two-piece Black pointers  Hand-polished Stainless Steel bezel Studded connection for ring terminals Red illuminated edge-lighting Technical Specifications:  Operating Range  - 10 to 16 V 2.06" (53 mm) Mounting hole Operating Voltage - 12/24 V In the box: Gauge Mounting Hardware Installation Manual Factory P/N VP4081 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

AC Main + 8 Positions / DC Main + 29 Positions Switches Color: White Installed AC Breakers (1) 16A (5) 8A Installed DC Breakers (1) 100A Main (20) 15A Voltage 230v - 12V DC All AC and DC buses installed and fully pre-wired Label backlighting pre-installed ON - indicating LEDs installed in all circuit positions 100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch Maximum panel amperage - 100 Amperes AC, 50 Amperes DC WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

3 Input Panel Mounted Analog 12V Battery Condition Meter (Expanded Scale 8-16V DC Range) The contour analogue DC meter (expanded scale) is panel switchable to show 3 different battery banks. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Two Zone Detection & Alarm Panel - 2-5/8" Display - 12/24V DC Each system consists of a monitor panel and up to 14 smoke or heat detectors and/or rate of rise heat detectors connected to each zone (sold separately.) Features: Visual and audible indications of a fire or fault Water resistant display Voltage and EMI protected Reverse polarity protected Specifications: Supply Voltage: 9-32V DC Zone Loop Voltage: 24V DC (regardless of input voltage) Minimum Alarm Current: 15mA Maximum Current Per Zone: 400mA Maximum Sensors Per Zone: 8 EOL Resistor: 5.6kΩ Potential Free Transistor Output (Fault, Alarm): 50V max Relay Output (Buzzer): 2A

3 Blade aluminum propeller for Yamaha 25-60 horsepower engines with 3-1/2" Gear Case and Honda 35-60 horse power engines with 3-1/4" Gear Case. Both 13 tooth spline and thru hub exhaust.

AC 2 Sources + 12 Positions / DC Main + 19 Positions Switches Color: White Installed AC Breakers (3) 16A (1) 32A (6) 8A Installed DC Breakers (1) 100A Main (13) 15A Voltage 230v - 12V DC All AC and DC buses installed and fully pre-wired Label backlighting pre-installed ON - indicating LEDs installed in all circuit positions 100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch Maximum panel amperage - 100 Amperes AC, 50 Amperes DC WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

HTM-2 Fender 8.5" x 20.5" - Black with Adapter In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.  The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.  Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm) Tube Diameter - 0.625" (1.6cm) Circumference -  26.7" (67.9cm) Volume -  4.7 gallons (17.8L) Boat Size - 25' - 30' (7.6 - 9.1M) Weight - 4.7lb In the Box: Fender Inflation Adapter  *Sold as a Kit

HTM-2 Fender 8.5" x 20.5" - Blue with Adapter In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.  The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.  Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm) Tube Diameter - 0.625" (1.6cm) Circumference -  26.7" (67.9cm) Volume -  4.7 gallons (17.8L) Boat Size - 25' - 30' (7.6 - 9.1M) Weight - 4.7lb In the Box: Fender Inflation Adapter  *Sold as a Kit

HTM-2 Fender 8.5" x 20.5" - White with Adapter In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.  The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.  Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm) Tube Diameter - 0.625" (1.6cm) Circumference -  26.7" (67.9cm) Volume -  4.7 gallons (17.8L) Boat Size - 25' - 30' (7.6 - 9.1M) Weight - 4.7lb In the Box: Fender Inflation Adapter  *Sold as a Kit

BERKELEY S32016, MECH SHAFT SEAL 2-1/8 TYPE 21