|
3 Blade aluminum propeller for 150-300 horsepower engines with 15 tooth spline and thru hub exhaust. 4-3/4" Gear Case.
|
179.99 |
|
|
3 Blade stainless propeller for DF 150, 175, 200, 225, 250, 300 with 15 tooth spline and thru hub exhaust. 4-3/4" Gear Case.
|
537.99 |
|
|
3 Blade stainless propeller for DF 150, 175, 200, 225, 250, 300 with 15 tooth spline and thru hub exhaust. 4-3/4" Gear Case.
|
537.99 |
|
|
3 Blade stainless interchangeable hub propeller for 115 and up horsepower engines with thru hub exhaust, 4-3/4" gear case. Category E prop. Requires RBX™ hub kit for installation.
|
439.99 |
|
|
MAGNUS Escape Hatch - OD 22-3/16" x 22-3/16"
Heavy Duty Ocean Hatch
MAGNUS is a complete range of extra heavy-duty hatches. They are CE-classified AI, which means to say that they are designed for ocean use and can be fitted in any part of the hull or deck.
These hatches are provided with friction hinges, which will keep the hatch open in any position, without the need for stays. The hatch can be opened through 180° and there are virtually no obstructions in the hatch opening. Like other VETUS hatches, the MAGNUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position.
The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”.
The build-in dimensions (the cut-out sizes) of the Magnus hatches are in conformity which those that are current in the market.
Features:
External Dimensions - 22 3/16" x 22 3/16"
Cut Out Dimensions - 19 15/16" x 19 15/16"
Number of Handles - 4
*VETUS strongly advises against using MAGNUS hatches as an A1 escape hatch in the underside of a multihull. Due to the flexible nature of these types of vessels, water tightness cannot be guaranteed unless the hatch is installed on a flat and inflexible structure.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
596.88 |
|
|
ALTUS Escape Hatch - OD 23-1/16" x 23-1/16"
ALTUS is made of a sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of 3/8” (10 mm) and is ‘dark smoke’ colored. These hatches come with adjusters which are stylish and easy to operate, allowing the lid to be held open at almost any angle up to 90º. Type ALTUS can be fitted on the deck and opened from the inside or outside. It has a ventilation position and can be locked completely watertight.
They are CE-classified AII, which means to say that they are designed for ocean use and can be fitted on deck. These hatches are provided with carefully designed hatch adjusters, which are both stylish and easy to operate.
Like other VETUS hatches, the ALTUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position.
The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”.
An aluminum counter flange and a mosquito screen are available for these hatches.
Features:
External Dimensions - 23 1/16" x 23 1/16"
Cut Out Dimensions - 19 15/16" x 19 15/16"
Number of Handles - 2
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
522.00 |
|
|
HTM-1 Fender 6.3" x 15.5" - Black with Adapter
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 6.3" x 15.5" (16 x 39.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 19.8" (50.3cm)
Volume - 1.8 gallons (6.8L)
Boat Size - 20' - 25' (6.1 - 7.6M)
Weight - 2.5lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
47.44 |
|
|
HTM-1 Fender 6.3" x 15.5" - Blue with Adapter
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 6.3" x 15.5" (16 x 39.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 19.8" (50.3cm)
Volume - 1.8 gallons (6.8L)
Boat Size - 20' - 25' (6.1 - 7.6M)
Weight - 2.5lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
35.17 |
|
|
HTM-1 Fender 6.3" x 15.5" - White with Adapter
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 6.3" x 15.5" (16 x 39.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 19.8" (50.3cm)
Volume - 1.8 gallons (6.8L)
Boat Size - 20' - 25' (6.1 - 7.6M)
Weight - 2.5lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
47.44 |
|
|
HTM-1 Fender 6.3" x 15.5" - Black
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 6.3" x 15.5" (16 x 39.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 19.8" (50.3cm)
Volume - 1.8 gallons (6.8L)
Boat Size - 20' - 25' (6.1 - 7.6M)
Weight - 2.5lb
*Sold as an Individual
|
46.93 |
|
|
HTM-1 Fender 6.3" x 15.5" - Blue
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 6.3" x 15.5" (16 x 39.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 19.8" (50.3cm)
Volume - 1.8 gallons (6.8L)
Boat Size - 20' - 25' (6.1 - 7.6M)
Weight - 2.5lb
*Sold as an Individual
|
34.79 |
|
|
HTM-1 Fender 6.3" x 15.5" - White
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 6.3" x 15.5" (16 x 39.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 19.8" (50.3cm)
Volume - 1.8 gallons (6.8L)
Boat Size - 20' - 25' (6.1 - 7.6M)
Weight - 2.5lb
*Sold as an Individual
|
46.93 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 3/16" x 6" - 10-Pack - Black
Package of 10 Black 6"(15.2cm) long sections with a 3/16"(4.8mm) diameter that shrinks to 1/16"(1.6mm)
Wire Range: 20-12 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
11.72 |
|
|
Quick Release Pin - 3/16" x 9/16"
Specifications:
Diameter: 3/16"
Grip Length: 9/16"
Use with: 15-212
|
9.06 |
|
|
3 Blade aluminum propeller for Mercury 90+ horsepower outboards, select Mercruiser stern drive engines and Honda/Nissan/Tohatsu 115-250 horsepower outboards, all with 15 tooth spline and thru hub exhaust. 4-3/4" gear case.
|
167.99 |
|