|
Stainless Steel Louvered Vent - 9-1/8" x 4-5/8"
Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
|
16.32 |
|
|
Stainless Steel Louvered Vent - Oval - 9-1/8" x 4-5/8"
Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
|
18.29 |
|
|
Hatch Handle Latch - 3-1/8" x 2-11/16"
Constructed of sand cast brass with a chrome plated finish. These Hatch Handle Latches are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Adjustable locking arm adds additional security. Installs with four #8 FH fasteners (not included). Once installed, the locking arm can be trimmed to length.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
68.57 |
|
|
Solid Braid Polyester Cord Hank - 1/8" x 50' - White
Utility Cordage
Features:
Solid braid polyester cord
Mildew and rot resistant
Excellent for many quick tie and flag halyard applications
|
2.33 |
|
|
13-1/8" x 10" Electric Seat Slide
Perfect for seats 23" to 28" wide, this 13-1/8" X 10" electric seat slide travels up to 5" and can be stopped anywhere between its fully extended and retracted positions.
Features:
Ideal for seats 23" to 28"
Features 5" of travel distance (stroke length)
Water-resistant IP66 rating
Meets H31 testing standards for seat applications
Precision-machined 6000-series aluminum chassis
Rail/Linear Glide systems are self-lubricating, dirt-resistant, quiet, corrosion-free, lightweight and shock resistant
Low profile with secure fit with universal mounting bolt pattern on both pedestal and box applications
Quite an operation ≤ 58dB
Electric actuator
Self-locking at any given position (at rated loads)
No racking in any direction due to precision tolerances in the track/glide system
All electric seat slides and components are acid-etched clear anodized
Made in the USA
3-year limited warranty
Specifications:
12V DC 9 AMP Max current
Max load 3500N
Push and pull force of 1500N
IP66 Rated
Speed 13.5 mm/Sec @ 1500N
|
681.89 |
|
|
13-1/8" x 24" Electric Seat Slide
Perfect for seats and benches 29" to 40" wide, this 13-1/8" X 24" electric seat slide travels up to 5" and can be stopped anywhere between its fully extended and retracted positions. Contact your TACO Sales or Customer Service Representative for more information.
Features:
Ideal for seats 29" to 40"
Features 5" of travel distance (stroke length)
Water-resistant IP66 rating
Meets H31 testing standards for seat applications
Precision-machined 6000-series aluminum chassis
Rail/Linear Glide systems are self-lubricating, dirt-resistant, quiet, corrosion-free, lightweight, and shock resistant
Low profile with secure fit with universal mounting bolt pattern on both pedestal and box applications
Quite an operation ≤ 58dB
Electric actuator
Self-locking at any given position (at rated loads)
No racking in any direction due to precision tolerances in the track/glide system
All electric seat slides and components are acid-etched clear anodized
Made in the USA
3-year limited warranty
Specifications:
12V DC 9 AMP Max current
Max load 3500N
Push and pull force of 1500N
IP66 Rated
Speed 13.5 mm/Sec @ 1500N
|
875.99 |
|
|
13-1/8" x 36" Electric Seat Slide
Perfect for seats 41" to 54" wide, this 13-1/8" X 36" electric seat slide travels up to 5" and can be stopped anywhere between its fully extended and retracted positions. Contact your TACO Sales or Customer Service Representative for more information.
Features:
Ideal for seats 41" to 54"
Features 5" of travel distance (stroke length)
Meets H31 testing standards for seat applications
Precision-machined 6000-series aluminum chassis
Rail/Linear Glide systems are self-lubricating, dirt-resistant, quiet, corrosion-free, lightweight, and shock resistant
Low profile with secure fit with universal mounting bolt pattern on both pedestal and box applications
Quite an operation ≤ 58dB
Electric actuator
Self-locking at any given position (at rated loads)
No racking in any direction due to precision tolerances in the track/glide system
All electric seat slides and components are acid-etched clear anodized
Made in the USA
3-year limited warranty
Specifications:
12V DC 9 AMP Max current
Max load 3500N
Push and pull force of 1500N
IP66 Rated
Speed 13.5 mm/Sec @ 1500N
|
1211.90 |
|
|
Swivel Safety Hasp
Dimensions: 1-1/8" x 3"
Staple Hole: 5/16" Diameter
Fastener: #8(4)
Material: Chrome Plated Zamac
*For Freshwater Installation Only
|
9.88 |
|
|
Ampco Pumps KC2 2 1/2 X 2 Fluid End Nialbz 5.00" Trim
|
3440.34 |
|
|
Groco 1/8 Square Key 1/8 Square Key
|
3.51 |
|
|
Goulds 16Bfk1 - 5 1/8 Kit W/ 5 1/8 Trim
|
1989.00 |
|
|
BURKS 350GA6-2-5 1/8, PUMP AND MOTOR
UNSPSC Code: 40150000
|
3792.41 |
|
|
Cabinet Hinge
Size:2-1/8" x 1-1/2"
Fastener: #6 FH
Material: 304 Stainless Steel
Offset:3/4"
|
7.57 |
|
|
Cupboard Bolt - 2-1/8" x 1-1/2"
Features:
Chrome Plated Zinc Alloy
Black Polymer Slide and Knob
|
23.90 |
|
|
ALTUS Ventilation Hatch - OD 13-1/8" x 13-1/8"
ALTUS is made of a sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of 3/8” (10 mm) and is ‘dark smoke’ colored. These hatches come with adjusters which are stylish and easy to operate, allowing the lid to be held open at almost any angle up to 90º. Type ALTUS can be fitted on the deck and opened from the inside or outside. It has a ventilation position and can be locked completely watertight.
They are CE-classified AII, which means to say that they are designed for ocean use and can be fitted on deck. These hatches are provided with carefully designed hatch adjusters, which are both stylish and easy to operate.
Like other VETUS hatches, the ALTUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position.
The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”.
An aluminum counter flange and a mosquito screen are available for these hatches.
Features:
External Dimensions - 13 1/8" x 13 1/8"
Cut Out Dimensions - 10 1/4" x 10 1/4"
Number of Handles - 1
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
285.84 |
|