|
Teak Marine Lumber
Thickness: 7/8"
Width: 3-3/4"
Length: 3-7/8"
|
8.58 |
|
|
Teak Marine Lumber
Thickness: 7/8"
Width: 4"
Length:36"
|
71.65 |
|
|
Rail Base Fitting Rectangular Base 30° 316 Stainless Steel 1-7/8" x 3-3/16" - 1" OD
These Rectangular Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH fasteners (not included).
*Stainless tubing with a wall thickness of 0.049”
|
12.17 |
|
|
Hinge Adapter for 8" x 8" Base Plate
The Seaview Hinge adapter is the ideal solution for someone who needs extra height clearance when storing their boat. This allows the user to have their Seaview mount hinge backward. Available for Seaview mounts with a base dimension of 7" x 7", 8" x 8" and 10" x 10".
The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead, the user can just replace the top plate.
No Tools Needed
With our captive knobs, you do not need tools, and these will stay with the hinge when it's open or closed.
Gain Height Clearance
A simple and easy solution to lower the height of your radar mount. The hinge adapter can hinge back 180°. Allowing you the most clearance possible.
*Fits 36" tall radar mounts
|
561.60 |
|
|
3 Blade aluminum propeller for 4-6 horsepower engines with 12 tooth spline and thru hub exhaust.
|
62.99 |
|
|
3 Blade aluminum propeller for 4-6 horsepower engines with 12 tooth spline and thru hub exhaust.
|
62.99 |
|
|
3 Blade stainless propeller for BRP DF90, 115, 140HP 4-stroke high thrust, offshore application. Suzuki DF70A through DF140A engines. 15 tooth spline and thru-hub exhaust. 4-1/4" gear case.
|
387.99 |
|
|
Polyester housing is rust and corrosion proof. 3 position switch Off-On-Start. 6 screw terminals. Supplied with hexagonal black plastic face nut. Requires 7/8" mounting hole in panel. Ignition rated 15 Amp @ 12V DC, Solenoid 30 Amp @12V DC. Display packaged.
|
27.59 |
|
|
Polyester housing is rust and corrosion proof. 3 position switch Off-On-Start. 6 screw terminals. Supplied with hexagonal black plastic face nut. Requires 7/8" mounting hole in panel. Ignition rated 15 Amp @ 12V DC, Solenoid 30 Amp @12V DC. Display packaged.
|
65.99 |
|
|
G-5 Twin Eye Fender 8.8" x 26.8" - Graphite
Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced rope holds for long-term durability.
The G Series fender is designed to provide protection and stand-off for vessels between 10 to 40 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Hangs vertically or horizontally
Unique Polyform valve for years of service
Technical Specifications:
Size (diameter x length) - 8.8" x 26.8" (22.4 x 68.1 cm)
Eye Diameter - 0.75" (1.9 cm)
Circumference - 27.7" (70.2 cm)
Volume - 5.1 gallons (19.3 L)
Boat Size - 25'- 35' (7.6 - 10.7 M)
Weight - 4.4 lb
*Sold as an Individual
|
66.47 |
|
|
Winch Cable and Hook
7/32" x 50' galvanized cable, 5,600 lb. breaking strength
WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
45.70 |
|
|
F-7 - 15" x 41" - Double Layer - Navy
The F-Series are double layered making them softer, more durable & reversible.
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs.
They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colors and sizes to suit your individual requirements.
|
45.60 |
|
|
F-7 - 15" x 41" - Double Layer - Black
The F-Series are double layered making them softer, more durable & reversible.
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs.
They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colors and sizes to suit your individual requirements.
|
59.05 |
|
|
F-02 Twin Eye Fender 7.5" x 26" - White
Polyform has been producing the F Series fender for over 50 years and there is no comparison when it comes to quality, range of sizes, and protection offered.
The F Series fender has offered protection to the world's finest yachts and fishing vessels. Why? Because the owners and captains of these prestigious boats know that they can rely on Polyform’s F Series fenders to offer the size, strength, and dependability to protect their vessels from the rigors of the sea and weather. If you want the ultimate protection for your boat, Polyform F Series fenders are the only choice!
Classic European twin-eye style boat fenders for the most discerning eye.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Twin-eye design for vertical or horizontal use
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 7.5" x 26" (19.1 x 66cm)
Eye Diameter - .7" (1.8cm)
Circumference - 23.6" (59.9cm)
Volume - 3.1 gallons (11.7L)
Boat Size - 20' - 30' (6.1 - 9.1M)
Weight - 4.15lbs
*Sold as an Individual
|
63.43 |
|
|
F-02 Twin Eye Fender 7.5" x 26" - Black
Polyform has been producing the F Series fender for over 50 years and there is no comparison when it comes to quality, range of sizes, and protection offered.
The F Series fender has offered protection to the world's finest yachts and fishing vessels. Why? Because the owners and captains of these prestigious boats know that they can rely on Polyform’s F Series fenders to offer the size, strength, and dependability to protect their vessels from the rigors of the sea and weather. If you want the ultimate protection for your boat, Polyform F Series fenders are the only choice!
Classic European twin-eye style boat fenders for the most discerning eye.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Twin-eye design for vertical or horizontal use
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 7.5" x 26" (19.1 x 66cm)
Eye Diameter - .7" (1.8cm)
Circumference - 23.6" (59.9cm)
Volume - 3.1 gallons (11.7L)
Boat Size - 20' - 30' (6.1 - 9.1M)
Weight - 4.15lbs
*Sold as an Individual
|
63.43 |
|