|
PP4900 PowerPod Uncut (Usable Face = 12.5"W x 7.8"H (31.75cm W x 19.8cm H)
PowerPods are designed for the serious boater who is blasting offshore. He demands the most from his boat and his electronics. He needs a tough and rugged mount to protect vital electronics from the harshest of offshore boating conditions. Sturdy and secure, yet clean and attractive, PowerPods are better than bracket mounting. Over 70 Pre-Cut PowerPods are available for all popular manufacturers products. 1.8" opening in the swivel tube provides plenty of room for running wires and connectors through. PowerPods are positioned at a 20 degree tilt back viewing angle.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
Structural Rigidity
The Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it's potentially damaging effects on plastic. These NavPods are really strong!
Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.
Nickel Chrome Plated Stainless Steel
NavPod uses all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
Commitment to Quality
We are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty.
|
410.17 |
|
|
Speaker Wire - 12 AWG 25' (7.62M) Roll
The Fusion marine speaker cable range is specifically engineered for use on boats and ensures the best listening experience with your Fusion speakers and subwoofers. The speaker cable was specifically designed for the marine environment with high-quality materials to help protect the cable from the elements.
Ideal for connection with your Fusion marine speakers and subwoofers, the speaker cable features tinned copper wiring with parallel conductors for superior performance. The all-copper wire construction ensures the audio signal is transmitted with minimal resistance, delivering a higher-quality audio signal to your onboard speakers and subwoofers.
The result is a superior speaker cable that delivers reliable performance in the harsh marine environment, season after season.
Features:
Construction: Multistrand: Tinned Copper Cable with PVC Jacket
Temperature Rating: 105 °C (221 °F) dry or 90 °C (194 °F) wet
Fire Retardant Rating: VW-1
Voltage Rating: 600 V max.
Oil Resistance: Yes
Warranty: 1 Year
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.22 |
|
|
SWIVL-EZE Lock'N-Pin 3/4" Pedestal Kit 13" Post 7" x 7" Stainless Steel Base Plate Threaded
Features:
Includes 7" x 7" stainless steel threaded base plate, black E-coated seat mount and 13" high seat post
The 3/4" system gives you outstanding economical performance
Great for adding seating to fishing, pontoon or cruising boats
Lock'N-Pin products meet ABYC Standard
|
74.33 |
|
|
KingPin™ 7" x 7" Seat Mount without Spring - E-Coat Finish
Features:
Unintentional Detachment To Comply With ABYC
7″ x 7″ Swivel No Spring, Rotates 360°
Use With Any Thread-Lock™ Fixed Height Post For Fishing Use Only (sold separately)
|
16.63 |
|
|
7" x 7" Removable Seat Bracket
Features:
Non-Locking 7″ x 7″ Removable Seat Bracket
Marine Grade Black Plastic
|
17.03 |
|
|
7" x 7" Removable Seat Bracket with Swivel
Features:
Non-Locking 7″ x 7″ Removable Seat Bracket With Non-Locking 12-Way Swivel
Rotates 360°
E-Coat Finish To Resist Corrosion
|
28.20 |
|
|
OASIS™ Lite 7 x 7 ft. Canopy with Sun Wall - Black
The lightweight, portable designs of OASIS™ Lite canopies—perfect for kicking back at the campsite or tossing the frisbee in the park. The OASIS Lite 7' x 7' Canopy sets up easily using a one-push center hub with OnePeak™ technology for wherever the adventure takes you. Sometimes a little extra shade or wind protection is just what you need, so we made the sun wall easy to clip on any side. When it's time to pack up, the lightweight steel frame makes pulling the canopy to and from the car a breeze using the wheeled carry bag.
Features:
One-Push Center Hub: OnePeak™ technology makes setting up quick and easy; when it's time to pack up, pull the strap to take down
Sun & Wind Protection: Sun wall clips to the side of the canopy for additional shade and helps block the wind; UPF 50+ helps block harmful UV rays
Lightweight Steel Frame: Makes it easy to carry to and from the car (28.8 lbs.)
Pinch-Free Setup & Takedown: Comfort Grip™ features easy-to-use buttons for locking the poles in place when setting up or taking down
More Shade: Overhanging eaves provide a larger shade area (49 sq. ft.)
Wheeled Carry Bag: Includes straps for secure packing and easy pulling
Dimensions: 7 x 7 (ft.) & 8 ft. 8-inch center height
Specifications:
Color: Black
Gear Pockets: No
Sidewall Included: Yes
Shelter Comfort Grips: Yes
Pole Material: Steel
Guy lines and stakes Included: Yes
Sand Bags Included: No
Shelter Center Height: 8 ft. 8-inch
*1-year limited warranty
|
123.00 |
|
|
OASIS™ Lite 7 x 7 ft. Canopy - Black
The lightweight, portable designs of OASIS™ Lite canopies—are perfect for kicking back at the campsite or tossing the frisbee in the park. The OASIS Lite 7' x 7' Canopy sets up easily using a one-push center hub with OnePeak™ technology for wherever the adventure takes you. When it's time to pack up, the lightweight steel frame makes pulling the canopy to and from the car a breeze using the wheeled carry bag.
Features:
One-Push Center Hub: OnePeak™ technology makes setting up quick and easy; when it's time to pack up, pull the strap to take down
Sun Protection: UPF 50+ helps block the sun’s harmful UV rays; overhanging eaves provide a larger shade area (49 sq. ft.)
Lightweight Steel Frame: Makes it easy to carry to and from the car (27.6 lbs.)
Pinch-Free Setup & Takedown: Comfort Grip™ features easy-to-use buttons for locking the poles in place when setting up or taking down
Wheeled Carry Bag: Includes straps for secure packing and easy pulling
Dimensions: 7 x 7 ft. & 8 ft. center height
Specifications:
Color: Black
Gear Pockets: No
Sidewall Included: Yes
Shelter Comfort Grips: Yes
Pole Material: Steel
Guy lines and stakes Included: Yes
Sand Bags Included: No
Shelter Center Height: 8 ft.
*1-year limited warranty
|
103.87 |
|
|
OASIS™ Lite 7 x 7 feet Canopy - Red
The lightweight, portable designs of OASIS™ Lite canopies—are perfect for kicking back at the campsite or tossing the frisbee in the park. The OASIS Lite 7' x 7' Canopy sets up easily using a one-push center hub with OnePeak™ technology for wherever the adventure takes you. When it's time to pack up, the lightweight steel frame makes pulling the canopy to and from the car a breeze using the wheeled carry bag.
Features:
One-Push Center Hub: OnePeak™ technology makes setting up quick and easy; when it's time to pack up, pull the strap to take down
Sun Protection: UPF 50+ helps block the sun’s harmful UV rays; overhanging eaves provide a larger shade area (49 sq. ft.)
Lightweight Steel Frame: Makes it easy to carry to and from the car (27.6 lbs.)
Pinch-Free Setup & Takedown: Comfort Grip™ features easy-to-use buttons for locking the poles in place when setting up or taking down
Wheeled Carry Bag: Includes straps for secure packing and easy pulling
Dimensions: 7 x 7 ft. & 8 ft. center height
Specifications:
Color: Red
Gear Pockets: No
Sidewall Included: Yes
Shelter Comfort Grips: Yes
Pole Material: Steel
Guy lines and stakes Included: Yes
Sand Bags Included: No
Shelter Center Height: 8 ft.
*1-year limited warranty
|
103.87 |
|
|
OASIS™ 7 x 7 feet Canopy Sun Wall Accessory - Grey
Get even more protection from the sun and wind on your next outdoor adventure with the OASIS™ 7' x 7' Canopy Sun Wall Accessory. Whether you’re going camping for the weekend or spending a day in the park, clip the sun wall to any side of the canopy for added protection when you need it. Fits standard OASIS Lite. Also comes in 10 x 10 ft. and 13 x 13 ft. sizes.
Features:
Protection: Provides additional shade and helps block wind
Versatile: Clips to any side of the canopy
Compatible: Fits standard 7' x 7' OASIS™ Lite canopies
Specifications:
Color: Grey
*1-year limited warranty
|
28.87 |
|
|
King Pin 7" x 7" Base Plate Only
This 7" x 7" base plate works with standard pin King Pin post applications.
Specifications:
Size (inch): 7" x 7"
|
44.05 |
|
|
5" Stainless Steel Power Mount - 7" x 7" Base - f/Garmin/Raymarine 3G/4G Radar
Includes ADA-R1 modular top plate.
Seaview Stainless Steel Radar Mounts are 5" tall and aft leaning. The 7" x 7" base plate utilizes a small footprint, great for installations where space is limited. The body is made out of 316 stainless steel.
This Seaview stainless steel mount is also light bar compatible with Seaview stainless steel light bars. The stainless steel light bars come pre-wired and are USCG approved for boats up to 20 meters (65.6 ft.) in length.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
465.60 |
|
|
5.25" AFT Leaning Mount for Searchlights & Thermal Cameras with 7" x 7" Base Plate
Seaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″.
Cable Management
A hollow oval mast section provides plenty of room for cable management.
Space-Saving Design
The small 7"x 7" base footprint makes this a great solution to an installation where space is an issue.
|
360.00 |
|
|
NMEA Cable, 1 x 7 Pin Connector, 5 Meters
Replaces Furuno Part # 000-144-418
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
120.00 |
|
|
25' x 7/32" Stainless Steel Universal Premium Replacement Galvanized Cable with Pulley Block
For all manual and electric trailer winches. High chromium content and added nickel make these cables virtually impervious to corrosion and add years of service. Ideal for any winch using 7/32 inches diameter cable, designed for handling boats up to 11,500 pounds, superior 7 x 19 strand cable construction for maximum pulling strength. Complete installation instructions included. Available with heavy duty zinc plated pulley block.
Features:
Stainless Steel
Universal Premium Replacement Cable
Galvanized with Pulley Block
25 feet x 7/32 inches
|
168.41 |
|