|
5/16" x 50' Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray
This hose is built with the best fuel and age-resistant formulations and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year.
Features:
Provides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone
Also, provides excellent rope-like bend-ability and fitting retention
For both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%)
EPA Certified and CARB Executive Order for low permeation Type B1-15
NMMA Type Accepted & CE certified
Application:
Marine Fuel Hose for distribution, return, vent and transfer
For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
Construction:
Tube: Fluoroplastic Internal Barrier
Cover: Gray CPE Rubber
Reinforcement: 2-Spiral Polyester Plies
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Length: 50’ (15m) Boxed
Specifications:
Inner Diameter: (inch) 5/16" / (mm) 7.92
Outer Diameter: (inch) 0.500 / (mm) 12.7
Burst Pressure: (psi) 175 / (mpa) 1.21
Working Pressure: (psi) 35 / (mpa) 0.24
Bend Radius: (inch) 2.5" / (mm) 63.5
Weight: (lb/100 ft.) 7.8 / (kg/m) 0.116
Permeation Rate (Standard is (15g/m^2/24hrs (CE10)): 5.0
*The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15
|
112.56 |
|
|
Anchor Rope - 3/16" x 100' with Stainless Steel Shackle
Premium Anchor Rope works for all brands of electric anchor winches in fresh and salt water use. Features a professional eye splice, stainless steel thimble and traditional thread whipping to secure the thimble and splice.
Rope is manufactured with a reflective tracer that is easily visible in near-darkness.
Features:
For all brands of electric anchor winches, saltwater and freshwater use
Factory loop and Stainless Steel thimble adds strength and durability
Technical Specifications:
Size - 3/16" (5 mm) x 100' (30 M)
Color - Blue with reflective tracer
Breaking Strength - 800 lb
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.11 |
|
|
Flex Vinyl Rub Rail Kit - Black with White Insert - 50' - 1-1/16" x 11/16"
Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide.
Features:
50'
Vinyl
Rub Rail Kit
1-1/16" x 11/16"
|
270.28 |
|
|
Flex Vinyl Rub Rail Kit - Black with Black Insert - 70' - 1-1/16" x 11/16"
Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide.
Features:
Rub Rail Kit
Vinyl
70'
1-1/16" x 11/16"
Black with Black Insert
|
314.24 |
|
|
Microfiber Polishing Cloth - 16" x 16" - Single Bag
Super-Premium 16" x 16" Grey Microfiber Polishing Cloth. Clean faster, easier, cheaper! Use it everywhere, ON ANY SURFACE! Made from Starfiber® Microfiber technology, this cloth works better than any other cloth on the market today -- with or without chemicals.
Removes:
Dust
Dirt
Fingerprints
Grease
Oil
Polish
Waxes
Bugs and Tar
Nicotine film
Why this Product is Best:
Use wet or dry. It works electrostatically. Use on ANY surface. Washable up to 500 times making this a great value. Streak-free performance.
Absorbs 4 times its weight in liquid. Thick commercial grade. After washing, cloth dries in 1/3 the time of ordinary towels.
Instructions for use:
Use wet or dry. When applying or removing wax, use DRY only. Flitz Premium Microfiber Cloths can be used over & over & over-up to 500 times! Following the simple care instructions below will ensure your cloth a maximum life. Cloths do not need to be washed after every use when used only for dusting. Just shake out the cloth, or rinse in hot sudsy water.
Washing & Care Instructions:
Machine wash COLD water. The first time you wash the red cloths, the red color will bleed. WASH WITH LIKE COLORS ONLY! Do NOT use fabric softener. The fabric softener will coat the threads eliminating the absorbance and will also cause streaking.
WARNING: This product can expose you to chemicals including Methanol which is known to the State of California to cause reproductive harm, and 1, 4-Dioxane which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
4.24 |
|
|
Quick Release Pin - 3/16" x 9/16"
Specifications:
Diameter: 3/16"
Grip Length: 9/16"
Use with: 15-212
|
9.06 |
|
|
MAGNUS Escape Hatch - OD 22-3/16" x 22-3/16"
Heavy Duty Ocean Hatch
MAGNUS is a complete range of extra heavy-duty hatches. They are CE-classified AI, which means to say that they are designed for ocean use and can be fitted in any part of the hull or deck.
These hatches are provided with friction hinges, which will keep the hatch open in any position, without the need for stays. The hatch can be opened through 180° and there are virtually no obstructions in the hatch opening. Like other VETUS hatches, the MAGNUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position.
The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”.
The build-in dimensions (the cut-out sizes) of the Magnus hatches are in conformity which those that are current in the market.
Features:
External Dimensions - 22 3/16" x 22 3/16"
Cut Out Dimensions - 19 15/16" x 19 15/16"
Number of Handles - 4
*VETUS strongly advises against using MAGNUS hatches as an A1 escape hatch in the underside of a multihull. Due to the flexible nature of these types of vessels, water tightness cannot be guaranteed unless the hatch is installed on a flat and inflexible structure.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
596.88 |
|
|
ALTUS Escape Hatch - OD 23-1/16" x 23-1/16"
ALTUS is made of a sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of 3/8” (10 mm) and is ‘dark smoke’ colored. These hatches come with adjusters which are stylish and easy to operate, allowing the lid to be held open at almost any angle up to 90º. Type ALTUS can be fitted on the deck and opened from the inside or outside. It has a ventilation position and can be locked completely watertight.
They are CE-classified AII, which means to say that they are designed for ocean use and can be fitted on deck. These hatches are provided with carefully designed hatch adjusters, which are both stylish and easy to operate.
Like other VETUS hatches, the ALTUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position.
The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”.
An aluminum counter flange and a mosquito screen are available for these hatches.
Features:
External Dimensions - 23 1/16" x 23 1/16"
Cut Out Dimensions - 19 15/16" x 19 15/16"
Number of Handles - 2
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
522.00 |
|
|
Oberdorfer 5930 Machine Screw 5/16 X 1"
|
30.60 |
|
|
16" x 12" Heavy Duty Performance Trim Tab Kit w/o Switch Kit -12V
Lenco Electric Heavy Duty Polished Blade Trim Tab Kits are supplied with electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges, 85 degree inside taper and 1/4" diameter hinge pin. Kits equipped with Extreme Duty actuators with 5/16" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes. .
Kit Contents:
2 each of 12-gauge stainless steel Electro-Polished trim tab blades
2 each of #15055-001 XD extreme duty actuators with 6' lead and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
1 each of the Lenco owner’s / installation manual
Boat-mounting hardware supplied by customer
Specifications:
Suggested Boat Length: 20' to 38'
Length of Tab: 16"
Width of Tab: 12"
Minimum Transom Height: 10.5"
Blades: 12 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Switch Required: 15069-001 or 15070-001
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1198.50 |
|
|
16" x 12" Standard Performance Trim Tab Kit w/o Switch Kit- 12V
Upgraded electro-polished trim blades with stouter 1/4" diameter hinge pin make these Performance Trim Tab Kits a cut above the base level Lenco Standard Mount Kits. Equipped with the same fast response electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges (the 16" x 12" and the 18" x 14" have an 85 degree inside taper) and 1/4" diameter hinge pin. Kit includes Standard Actuators with 5/16" SS bolts. The actuators mount at the trailing edge of the blades
Kit Contents:
2 each of 12-gauge stainless steel Electro-Polished trim tab blades
2 each of #15054-001 actuators with 6' lead and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
2 each of #15085-001 (#116) upper mounting bracket with gland seal
2 each of #50014-001 (#119) lower mounting bracket
1 each of the Lenco owner’s / installation manual
All necessary stainless steel mounting hardware
Specifications:
Suggested Boat Length: 19' to 34'
Length of Tab: 16"
Width of Tab: 12"
Minimum Transom Height: 11"
Blades: 12 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
814.27 |
|
|
16" x 24" Super Strong Trim Tab Kit w/o Switch -24V - Dual Actuator
Lenco Electric Super Strong Trim Tab Kits were designed for sport-fishing boats, high speed cruising boats and large commercial vessels. 7 Gauge flat - 304 SS blades with all stainless steel mounting hardware withstand the rigors of the most demanding conditions. No spray or mist when mounted in recessed pockets. 3/8" diameter hinge pin and 3.75" sacrificial anode. All Super Strong Trim Tab Systems have Vandar Upper Mounting Brackets with Gland Seal and 10 gauge SS lower mounting brackets with 3/8" SS bolts
Actuator Part # 15063-002 (Super Strong 24-Volt Trim Tab Kit)
Specifications:
Suggested Boat Length: 35' to 50'
Length of Tab: 16"
Width of Tab: 24"
Blades: 7 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Switch Required: 15071-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 24-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1698.67 |
|
|
16" x 24" Super Strong Trim Tab Kit w/o Switch -12V -Dual Actuator
Lenco Electric Super Strong Trim Tab Kits were designed for sport-fishing boats, high speed cruising boats and large commercial vessels. 7 Gauge flat - 304 SS blades with all stainless steel mounting hardware withstand the rigors of the most demanding conditions. No spray or mist when mounted in recessed pockets. 3/8" diameter hinge pin and 3.75" sacrificial anode. All Super Strong Trim Tab Systems have Vandar Upper Mounting Brackets with Gland Seal and 10 gauge SS lower mounting brackets with 3/8" SS bolts
Actuator Part # 15056-002 (Super Strong 12-Volt Trim Tab Kit)
Specifications:
Suggested Boat Length: 35' to 50'
Length of Tab: 16"
Width of Tab: 24"
Blades: 7 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Switch Required: 15071-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1696.13 |
|
|
16" x 30" Super Strong Trim Tab Kit w/o Switch -24V - Dual Actuator
Lenco Electric Super Strong Trim Tab Kits were designed for sport-fishing boats, high speed cruising boats and large commercial vessels. 7 Gauge flat - 304 SS blades with all stainless steel mounting hardware withstand the rigors of the most demanding conditions. No spray or mist when mounted in recessed pockets. 3/8" diameter hinge pin and 3.75" sacrificial anode. All Super Strong Trim Tab Systems have Vandar Upper Mounting Brackets with Gland Seal and 10 gauge SS lower mounting brackets with 3/8" SS bolts
Actuator Part # 15063-002 (Super Strong 24-Volt Trim Tab Kit)
Specifications:
Suggested Boat Length: 40' to 60'
Length of Tab: 16"
Width of Tab: 30"
Blades: 7 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Switch Required: 15071-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 24-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1878.72 |
|
|
16" x 30" Super Strong Trim Tab Kit w/o Switch -12V -Dual Actuator
Lenco Electric Super Strong Trim Tab Kits were designed for sport-fishing boats, high speed cruising boats and large commercial vessels. 7 Gauge flat - 304 SS blades with all stainless steel mounting hardware withstand the rigors of the most demanding conditions. No spray or mist when mounted in recessed pockets. 3/8" diameter hinge pin and 3.75" sacrificial anode. All Super Strong Trim Tab Systems have Vandar Upper Mounting Brackets with Gland Seal and 10 gauge SS lower mounting brackets with 3/8" SS bolts
Actuator Part # 15056-002 (Super Strong 12-Volt Trim Tab Kit)
Specifications:
Suggested Boat Length: 40' to 60'
Length of Tab: 16"
Width of Tab: 30"
Blades: 7 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Switch Required: 15071-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1783.61 |
|