Welded Ring - 8mm(5/16") Thickness - 42.5mm(1-5/8") ID Round Welded Stainless Steel Ring 8mm(5/16") Thickness 42.5mm(1-5/8") Inner Diameter

1/2" NPT Bronze 90 Degree Pipe to 1/2"-5/8" ID Hose  Features: 90 degree Male NPT x Hose connection C83600 Bronze Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems. Specifications: Thread NPT: 1/2" Hose ID (in): 1/2" or 5/8"

TastePURE Heated Drinking Water Hose - 25' - 5/8"ID The core of the Camco TastePURE Heated Drinking Water Hose is made with an NSF 61 certified, drinking water safe hose that is BPA, phthalate and lead free. The TastsePURE Heated Drinking Water Hose won't leach harmful chemicals into your water or leave it tasting like plastic the way standard garden hoses do. It is ideal for RVs, livestock, agriculture, kennels and other industrial, commercial and residential uses. Its energy saving thermostat only heats as needed, saving you money on your electric bill. The fittings are heavy-duty machined and plated for maximum corrosion resistance and the durable exterior jacket protects water hose and electrical components from damage or exposure. CSA Low Lead Content Certified to NSF/ANSI 372. Compliant with all federal and state level Low Lead Laws. Includes female-to-male adapter to allow connection to the water supply on either end of hose, depending on the location of the electrical outlet. Durable exterior jacket protects water hose and electrical components from damage or exposure. Features: Heavy-duty machined and plated fittings for maximum corrosion resistance ID: 5/8 in. Length: 25 ft. Ideal for water line freeze protection down to minus 20°F (minus 28°C) with an energy saving thermostat Operates on 120VAC Made with NSF-61 certified drinking water safe hose

Jabsco 93003-8240# Hose 5/8" Id  

Split Cotter Ring - 14mm(5/8") ID Suits clevis pins RF260 - RF274 Grade 316 Stainless Steel

Spool Roller 5" - 5/8" ID - Gold TPR with Bushing White Solid Features: Fits standard brackets and shaft sizes Natural rubber 2-7/8" Diameter 4-7/8" Width Gold TPR 5/8" Shaft

1/2" NPT x 1/2" or 5/8" ID Bronze Pipe to Hose Straight Fitting Features: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems

Blue Silicone Wet Exhaust Hump with 4 T-Bolt Clamps - 8" ID x 8" Length Trident Silicone Hump Hose Bellows provide the ultimate flexible connectors for marine wet exhaust systems. They offer much greater tolerance to heat, misalignment, engine movement, and vibration, with significant savings in cost, parts, labor, and space. Construction:  Tube & Cover: VHT blue silicone Color: Blue Reinforcement: Polyester reinforcement Temperature Range: 350°F (177°C) Specifications: Inner Diameter: (inch) 8" / (mm) 203.2 Outer Diameter: (inch) 8.5" / (mm) 216 Working Pressure: (Psi) 15 / (Bar) 1 *Burst Pressure is 4 x Working Pressure

RC10 Automatic Rope/Chain Windlass Designed for 5/16" chain and 5/8" rope combination Maximum pull: 1540 lbs Metric Chain Size: 8mm Motor Wattage: 1000W Innovative heavy duty stainless steel pressure arm, coupled with a unique rope/chain gypsy, giving an unparalleled level of performance. Simple two piece installation, saving time and money and allowing easy retrofitting without disassembly of the windlass. Manufactured from marine grade chromed bronze for long term durability The topworks can be fully disassembled utilizing the handle provided, a screw driver and common allen key, making regular service and maintenance a breeze. No special tools required! A huge, through deck, hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker Not only does the RC10 effortlessly handle combination rope/chain rodes, it works just as well with all chain rodes for those who may want the extra security of an all chain systems combined with an elegantly styled, low profile windlass on their foredeck. Exclusive Maxwell 3 Year Limited Warranty ensuring your confidence that you are getting the best product on the market. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Impeller Removal Tool 2-9/16" to 4-5/8" (65mm - 118mm) Features: Simple to use Fits ALL makes of impeller Avoids damage to pump All Stainless Steel WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Swivel Shackle - 5/16" Pin - 2-3/8"L x 21/32"W Features: Coined head pin 7.9mm(5/16") Diameter Pin Grade 316 Stainless Steel bodies and pins Stainless Steel ball bearing race

RC8 12V Windlass - 100W 5/16" Chain to 5/8" Rope Features: The stainless steel RC8-6 fully automatic rope/chain windlass is designed to effortlessly retrieve and deploy 6mm/7mm (1/4") chain spliced to 12mm (1/2") three strand or 8-brait (plait) rope. The larger stainless steel RC88 can be used with 8mm (5/16") chain spliced to 14mm (9/16") three strand or 8-plait rope. The ingeniously designed rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the RC8 Series. A sleek, Low Profile version and a MAX-grip capstan drum version, with drum made in chromed bronze, are available. Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass. Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations. The RC8 features Maxwell's revolutionary, and patented, new Wave Design chainwheel. The heavy duty stainless steel pressure arm is designed to effectively help grasp the rope/chain splice, giving the RC8 an unparalleled level of performance. In combination with a heavy duty, large wire diameter, stainless steel pre-loaded spring, the pressure arm always exerts maximum control pressure. The RC8 works just as effectively with all-chain rodes. Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker. Full disassembly capability of the topworks utilising only the handle provided and an Allen key. Manual override and Free Fall, using the emergency crank/clutch handle provided. Sealed oil bath and marine-grade hard anodized, alloy gearbox provides maximum output via a precision worm and worm wheel.

RC8 24V Windlass - 100W 5/16" Chain to 5/8" Rope Features: The stainless steel RC8-6 fully automatic rope/chain windlass is designed to effortlessly retrieve and deploy 6mm/7mm (1/4") chain spliced to 12mm (1/2") three strand or 8-brait (plait) rope. The larger stainless steel RC88 can be used with 8mm (5/16") chain spliced to 14mm (9/16") three strand or 8-plait rope. The ingeniously designed rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the RC8 Series. A sleek, Low Profile version and a MAX-grip capstan drum version, with drum made in chromed bronze, are available. Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass. Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations. The RC8 features Maxwell's revolutionary, and patented, new Wave Design chainwheel. The heavy duty stainless steel pressure arm is designed to effectively help grasp the rope/chain splice, giving the RC8 an unparalleled level of performance. In combination with a heavy duty, large wire diameter, stainless steel pre-loaded spring, the pressure arm always exerts maximum control pressure. The RC8 works just as effectively with all-chain rodes. Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker. Full disassembly capability of the topworks utilising only the handle provided and an Allen key. Manual override and Free Fall, using the emergency crank/clutch handle provided. Sealed oil bath and marine-grade hard anodized, alloy gearbox provides maximum output via a precision worm and worm wheel.

Sail Slide - Internal Track - 16mm(5/8") Wide x 32mm(1-1/4") Long Impact Resistant, U.V. Stabilized Nylon White

Twisted Shackle - 5/16" Pin - 1-7/8"L x 5/8"W Features: High strength to weight ratio Grade 316 Stainless Steel bodies and pins Coined shackle pin head