Universal Fuel Line Kit - 5/16" Diameter x 6' Length This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 5/16-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance. Features:  This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines. Universal for any engines and tanks Multi-Layer, Low-Permeation Primer Bulb 6 ft. x 5/16 in. Low Permeation Hose Reliably delivers fuel to your engine *No end fittings included

Universal Aluminum Fuel Hose Fitting - 3/8" NPT x 3/8" Barb This Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line. Features: Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels Specifications: Material Construction: Aluminum Male thread, hose barb (inch) Male 3/8" NPT x 3/8" Barb  *Use thread sealant on all threads

Aluminum Fuel Hose Fitting - 3/8" NPT x 3/8" Barb - (Anti-Siphon Valve) This Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line. This is a male thread, anti-siphon valve with 3/8-In. NPT x 3/8-In. barb.  Features: Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels Anti-Siphon Valve Material Construction: Aluminum Male thread, hose barb (inch) Male 3/8" NPT x 3/8" Barb  *Use thread sealant on all threads

Drain Plug And Receiver Kit - 3/4" Diameter The Attwood Drain Plug and Receiver Kit ensures that a drain is closed properly.  Features: Molded black plastic with threaded receiver Molded retaining strap Includes attaching screws and elastomeric gasket for a watertight fit Specifications: Diameter: (inch) 3/4" *Intended for use on small recreational boats and jet skis

Yamaha Fuel Line Kit 6' x 3/8" Attwood's low-permeation fuel line kits set the standard in performance, safety, and value. Along with featuring Attwood's award-winning Universal Sprayless Connector, these kits meet strict United States EPA regulations. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance. Features: Includes Attwood's award-winning Universal Sprayless Connector; no more dangerous fuel sprays when connecting and disconnecting pressurized lines Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors Includes 3/8-inch low-permeation fuel hose that resists kinking and hardening; rated up to 100 degrees Centigrade Versatile: compatible with Ethanol blended fuels, Yamaha Brand engines and tanks Attwood products are both compatible and reliable, engineered and built with a never-fail attitude WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Outboard Fuel Filter for 3/8 inch Lines Protect your carbureted engine by trapping pollutants before they even reach the engine itself. High-flow, in-line fuel filters will work with most outboard motors. Features:  Use with 3/8 inch fuel lines Works with most outboard motors A clear body allows visual inspection, making it easier to stay on top of maintenance High-strength, impact-resistant, and shatter-resistant construction is ideal for  tough conditions Disposable for ultimate convenience *Best to replace during winterize or spring start-up for optimum results

OC15109-6 Steering Cable 8" Stroke x 6' long For use with Type R Remote Drive Unit

Wire Rope Grip - Size 10 - 10mm(3/8") Diameter Wire Features: Used when adjustment in strop length is needed Stainless Steel Require no special tools for assembly and can be disassembled and reused

Leather Mooring Line Chafe Kit - 3/8" & 7/16"  Mooring line chafe kits include: Waxed twine, heavy duty needle and (2) 10” pieces of leather pre-stamped for sewing. Used to reduce chafe and extend the life of mooring lines. Natural leather - color may vary. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8" ID x 6' Long Silicone Marine Wet Exhaust & Water Hose - Blue Trident Silicone Marine Wet Exhaust and Water-Coolant Hose is the ultimate in extra thick soft wall silicone quality with very high-temperature performance and extra long service life. Exceeds SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards. #202V Glossy Blue “Very Hi Temp” has 4-6 ply polyester reinforcement and 350°F (177°C) Max. Used worldwide on premium boats, yachts, and special service vessels. It has become the super yacht standard.

Impeller Kit - 9 Blade - Nitrile - 3-3/4" Diameter x 3-1/2" W, 1" Shaft Diameter Features: Material: Nitrile Drive Type: Spline Drive Number of Blades: 9 Dimensions: Diameter: 3-3/4", Shaft Diameter: 1", Shaft Width: 3-1/2" Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance. Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces. Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Split Ring - 10mm(3/8") Diameter Suits Clevis Pins RF258-RF266

Aluminum Ribbed Table Pedestal - 2-3/8" O.D. - 26" Length All columns are tapered on the bottom to submit a secure fit into the base while allowing for easy removal and storage. Features and Benefits Dual Taper Ribbed Satin Anodized Finish

RAM® Tough-Ball™ with 3/8"-24 X .375" Threaded Stud Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and steel durability allows for a multitude of real-world, and out of this world, applications. With so many of the things we use incorporating threads and fasteners, there really is no limit to the number of uses you’ll find for the RAM Tough-Ball™.  The RAP-379U-372437 consists of a 1.5" diameter rubber ball, connected to a 3/8"-24 X .375" male threaded post. Specifications: Thread Pitch: 3/8"-24 x .375" Ball/Socket Size: C Size (1.5") Weight Capacity: 4lbs Materials: High strength composite, Stainless steel threads

RAM® Tough-Ball™ with 3/8"-16 X .375" Threaded Stud  Introducing the new RAM Tough-Ball™.  Why call it tough? Because this latest addition to the RAM product line has steel inside and out.  The seamless transition between RAM versatility and steel durability allows for a multitude of real-world, and out-of-this-world, applications.  With so many of the things we use incorporating threads and fasteners, there really is no limit to the number of uses you’ll find for the RAM Tough-Ball™. The RAP-379U-371637 consists of a 1.5" diameter rubber ball, connected to a 3/8"-16 X .375" male threaded post. Specifications: Thread Pitch - 3/8"-16 x .375"  Ball/Socket Size - C Size (1.5") Weight Capacity - .15 lbs Materials - High Strength Composite/Stainless Steel Threads