Low-Pressure Verifier Gauge Easily and accurately read the exact pressure of your SUP, boat, or other inflatable. Connects to standard high-pressure HR valves. For low pressure up to 9 PSI. 

Marine Valve Kit Features: Original spare rubber valves in NBR material for diaphragm pump PN 03-01-001, 03-01-002 and 03-01-015, 03-01-016. For optimized capacity and flow performance, 2 duck valves in a kit. With 2 kits, total of 4 valves, a replacement for PN 03-01-003 and 03-01-004. Please observe, two valves in one kit

Autopilot Check Valve Kit This check valve kit is used with the 1.2L and 2.0L autopilot pumps to isolate them from the steering system when the autopilot is not active. Check valves to prevent slow pressure leak down through the pump while disengaged. Boats with rudder trim tabs (outboard or rudder) that are properly adjusted do not need this check valve kit. Compatible Devices: Reactor™ 40 Hydraulic Autopilot with GHC™ 20 Autopilot Instrument Reactor™ 40 Hydraulic Autopilot with GHC™ 50 Autopilot Instrument  Reactor™ 40 Hydraulic Autopilot without GHC™ Autopilot Instrument  

Flush Pro Valve Kit - 5/8" Finally! Freshwater flushing of your inboard is as simple as connecting a garden hose. Features: Polymer Stainless Steel Spring Flush your boat engine safely and easily Transparent body allows for visual inspection of water flow Durable check valve system activated by water pressure from a garden hose Check valve automatically shuts off hull intake when water pressure is applied Adapter supplied with Flush Pro make winterizing your boat easy Can be used with on board generators Available for Standard 5/8" Hose Sizes Kit Includes: Water Inlet Fitting (Part #0499)

Flush Pro Valve Kit - 1" Finally! Fresh flushing of your inboard is as simple as connecting a garden hose. Features: Polymer Stainless Steel Spring Flush your boat engine safely and easily Transparent body allows for visual inspection of water flow Durable check valve system activated by water pressure from a garden hose Check valve automatically shuts off hull intake when water pressure is applied Adapter supplied with Flush Pro make winterizing your boat easy Can be used with on board generators Available for Standard 1" Hose Sizes Kit Includes: Water Inlet Fitting (Part #0499)

Flush Pro Valve Kit - 1-1/4" Finally! Freshwater flushing of your inboard is as simple as connecting a garden hose. Features: Polymer Stainless Steel Spring Flush your boat engine safely and easily Transparent body allows for visual inspection of water flow Durable check valve system activated by water pressure from a garden hose Check valve automatically shuts off hull intake when water pressure is applied Adapter supplied with Flush Pro make winterizing your boat easy Can be used with on board generators Available for Standard 1-1/4" Hose Sizes Kit Includes: Water Inlet Fitting (Part #0499)

Hydra-Cell 111-106-B Back Pressure Valve

Groco Bv-3000 Full Flow Ball Valve 3"  Groco- Full Flow Ball Valve 3"

Low Pressure Cyclone Centrifugal Pump - 12V Silent running. Single tool servicing. 2m (6 foot) suction lift when wet. A range of Stainless Steel General Purpose Centrifugal pumps designed specifically for the marine and industrial markets. Typical applications would be for circulation applications such as hot water systems, livewell or bait tank installations. Features: Heavy duty robust design Stainless steel construction Long life DC motor Silent running Anti-clog impeller design Long life mechanical seal Single tool servicing  Specifications: Pump Body: Stainless Steel Port Size: 3/4" pipe threads, available with NPTF threads Flow: 110 Liters/Minute (29.7 gallons/min.) Pressure: Up to 0.6 bar (8.7psi) Impeller: Stainless Steel Anti-Clog Impeller Design Shaft Seal: Mechanical Maximum Current: 9 Amp Fuse Size: 10 Amp Motor: Continuously rated Motor life 3500 hours ISO 8846 Marine and USCG Regulations for Ignition Protection ISO 8849 Marine Bilge Pump Standard WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Duck Bill Valve Kit - 1-1/2" The Dometic Duck Bill Valves Kit comes with two (2) 1 ½” duck bill valves for “T” and “S” series pumps.  These valves are a critical component of the VacuFlush system.  They help maintain and generate the vacuum for the system and should be replaced frequently.  Legacy # 385310076 *Sold as a Pair WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Low Pressure Cyclone Centrifugal Pump - 24V Silent running. Single tool servicing. 2m (6 foot) suction lift when wet. A range of Stainless Steel General Purpose Centrifugal pumps designed specifically for the marine and industrial markets. Typical applications would be for circulation applications such as hot water systems, livewell or bait tank installations. Features: Heavy duty robust design Stainless steel construction Long life DC motor Silent running Anti-clog impeller design Long life mechanical seal Single tool servicing  Specifications: Pump Body: Stainless Steel Port Size: 3/4" pipe threads, available with NPTF threads Flow: 110 Liters/Minute (29.7 gallons/min.) Pressure: Up to 0.6 bar (8.7psi) Impeller: Stainless Steel Anti-Clog Impeller Design Shaft Seal: Mechanical Maximum Current: 4.5 Amp Fuse Size: 7 Amp Motor: Continuously rated Motor life 3500 hours ISO 8846 Marine and USCG Regulations for Ignition Protection ISO 8849 Marine Bilge Pump Standard WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Kronos 2" Water Pressure Gauge Kit - 30 PSI Polished Stainless Steel bezel, flat glass lens, perimeter lighted spun aluminum dial with Gold and Black graphics. Gold increments and Logo on dial are Embossed.  All instruments include two piece Newport pointer with White hub.  A pressure gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc... As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure. 2" - Hole size: 2.0625" (53mm) Specifications: Flat Scratch Resistant Lens Polished Stainless Steel bezel LED Illuminating around the Perimeter of the Dial Newport style White Pointer Dual Scale - Imperial and Metric In the Box: 2” 30 PSI Kronos SS Water Pressure gauge 1/8” NPT Adapter w/locktite VS 516 Mounting hardware 15’ Tubing Factory P/N OP1171 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Cat Pump 34235 Valve Kit CAT Pumps 34235 Valve Kit contains OEM NBR valve parts to service a 3520 or 3535 pump. Regular valve replacement keeps your pump running safely and efficiently. OEM replacement parts guarantee correct fit and function. 2 kits are required to completely service one pump.   Valve Kit Includes: 48363 - Back-Up Ring, Valve Seat (3) 26142 - O-Ring, Valve Seat (3) 44727 - Valve Seat (3) 43932 - Valve (3) 44109 - Spring (3) 44728 - Spring Retainer (3) 44729 - Spring Retainer Washer (3) 89827 - O-Ring, Valve Plug (3) 48364 - Back-up Ring, Valve Plug (3)

Sealand 385311581 Duckbill Valve Kit 2" (4Pk) This 4 pack of 2" black duckbill valves for J, L, B & M-Series Vacuum pumps (311581).

Joker/Check Valve Kit For use with 37010, 37045, 37075, 37085, 37245, 37275 Series Marine Toilets, and 37055, and 37255 Series Electric Conversion Kits. Fits inside the discharge elbow and the connection of the pump cylinder.