CLR Marine Has Added Lowrance's New HDS Gen2 Multifunction Displays     NEW, FASTER:  HDS Gen2 The new Lowrance HDS Gen2 family includes HDS-5, HDS-7, HDS-8 and HDS-10 and features double the memory and twice the processor speed of first-generation HDS models — providing boaters with enhanced responsiveness, faster start-up and menu operation, and lightning-fast chart panning and zooming speeds.  

PedestalPod 70° Pre-Cut for Lowrance HDS-12 Gen2 Touch, HDS-12 Gen3 & HDS Carbon 12 - Carbon Series PedestalPod 70° models are specifically designed for protection of marine electronics on the bow of sportfishing boats. PedestalPod 70° models are better than bracket mounting and position electronic displays 12″ above the deck at an ideal 70° viewing angle. The tough and rugged black powder coated aluminum pedestal is 4″ in diameter with a 6.5″ round base, and is designed to accomodate the latest 12″ and 16″ displays. The convenient 360° swivel allows a completely customized position, gives anglers easy access to the fishfinder/chartplotter and allows boat covers to fit over the 70° PedestalPod with ease. Like all NavPods, 70° PedestalPods are designed to resist impacts, vibration and moisture ingress, and are crafted with a thick gauge, UV-stable acrylic capped ABS material designed specifically to provide structural stability. The NavPod housing incorporates a double gasket system that provides an excellent watertight seal to keep spray off of electrical connections, thus ensuring the reliability and longevity of marine electronics. Electronic displays easily flush mount into the precut housing and all wires and connections are routed internally through the pedestal base.

HDS-16 LIVE Gimbal Bracket HDS-16 LIVE Bracket with knobs.

HDS-9 LIVE Gimbal Bracket HDS-9 LIVE Bracket with knobs.

PP5058 PowerPod Pre-Cut for Lowrance MFD HDS-12 Gen2 Touch & HDS-12 Gen3 - Carbon Black The PP5050 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

PP5058 PowerPod Pre-Cut for Lowrance HDS-12 Gen2/HDS-12 Gen3 The PP5050 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We have re-designed and re-tooled all of the popular NavPods. We have reviewed all of the former products and selected the best design elements of each and incorporated them in every new Gen3 product.

Lowrance 7-Pin HD+ Sonar Adapter Cable Compatible with Lowrance HDS, HDS Gen2, HDS Gen3, HDS Carbon, Elite Ti, Hook, Hook 2 units with blue 7-Pin transducer port. Note: If connecting a Hook2 unit, you will also need a 7 Pin Transducer to Hook2/Reveal & Cruise Adapter from Lowrance.  Features: Provides clear 83/200 455/800 kHz HD views beneath the trolling motor Only for use with Tour or Tour Pro HD+ enabled motors Not compatible with Xi Series motors

Suncover for Elite-7 Ti Series Suncover for the Lowrance Elite-7 Ti Series Chartplotter/Fishfinders.

Suncover for Elite-9 Ti & Ti² Protective Suncover for Elite-9 Ti and Elite-9 Ti² Displays.

Gimbal Bracket and Knobs for 9" Lowrance units Gimbal Mounting Bracket f/HDS-9 Gen2 Touch/HDS Gen3/HDS Carbon/Elite-Ti/Hook/Elite-Chirp

Suncover for Elite-4 HDI Series and Hook-4 Series Make sure your unit continues to work like new by protecting it with the Elite-4 HDI Series suncover. This sturdily made cover fits perfectly. It protects from overexposure to sun glare during long boat trips. The suncover is UV ray resistant.

Lowrance 9-Pin HD+ Sonar Adapter Cable Compatible with Tour & Tour Pro HD+ Features: Provides clear 83/200 455/800 kHz HD views beneath the trolling motor Only for use with Tour or Tour Pro HD+ enabled motors Compatible with Lowrance HDS and Elite Ti2 units with black 9-Pin Xsonic transducer port Not compatible with Xi Series motors

Gimbal Mounting Bracket f/HDS-7 Gen2 Touch and Elite-7 with knobs

Suncover for FCV585 Protective Suncover for Furuno's FCV585 display.

Suncover for LS6100 & 1623 Protective Suncover for LS6100 and 1623 Displays.