Trim Tab Anode Skeg For Engines - Yamaha SX Material: Zinc Length: 5.51" Tab Height: 2.83" Outer Diameter: 3.94" Weight: 1.38lbs

Aluminum Mercury Zeus Pod Trim Tab Anode Kit with Hardware Features: Material: Aluminum Hardware included

Trim Tab Anode Material: Zinc Outer Diameter: 3.54" Weight: 1.32lbs

Trim Tab Anode Material: Aluminum Outer Diameter: 3.54" Length:4.13" Weight: 0.42lbs

Trim Tab Anode Material: Magnesium Outer Diameter: 3.54" Length:4.13" Weight: 0.27lbs

Quick Zinc Propeller Nut Anode Kit for BTQ140 Bow Thrusters Tecnoseal Quick Zinc Propeller Nut Anode Kit BTQ140 for 140mm diameter tunnel. For use in salt water. Mounting screw is not included. Most thrusters require 2 anodes.

Quick Zinc Propeller Nut Anode Kit for BTQ110-125 Bow Thrusters Tecnoseal Quick Zinc Propeller Nut Anode Kit BTQ110 for 110mm diameter tunnel. For use in salt water. Mounting screw is not included. Most thrusters require 2 anodes.

Quick Zinc Propeller Nut Anode Kit for BTQ185 Bow Thrusters Tecnoseal Quick Zinc Propeller Nut Anode Kit BTQ185 for 185mm diameter tunnel. For use in salt water. Mounting screw is not included. Most thrusters require 2 anodes.

Quick Zinc Propeller Nut Anode Kit for BTQ250 Bow Thrusters Tecnoseal Quick Zinc Propeller Nut Anode Kit BTQ250 for 250mm diameter tunnel. For use in salt water. Mounting screw is not included. Most thrusters require 2 anodes.

Quick Zinc Propeller Nut Anode Kit for BTQ300 Bow Thrusters Tecnoseal Quick Zinc Propeller Nut Anode Kit BTQ300 for 300mm diameter tunnel. For use in salt water. Mounting screw is not included. Most thrusters require 2 anodes.

Trim Tab Anode Skeg For Engines - Yamaha 200-250 Material: Aluminum Tab Height: 2.76" Outer Diameter: 3.94" Weight: 0.59lbs

Trim Tab Anode Skeg For Engines - Yamaha DX Material: Aluminum Length: 5.51" Tab Height: 2.83" Outer Diameter: 3.94" Weight: 0.54lbs

Trim Tab Anode Skeg For Engines - Yamaha SX Material: Aluminum Length: 5.51" Tab Height: 2.83" Outer Diameter: 3.94" Weight: 0.54lbs

9" x 9" Standard Performance Trim Tab Kit w/o Switch Kit- 12V Upgraded electro-polished trim blades with stouter 1/4" diameter hinge pin make these Performance Trim Tab Kits a cut above the base level Lenco Standard Mount Kits. Equipped with the same fast response electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges (the 16" x 12" and the 18" x 14" have an 85 degree inside taper) and 1/4" diameter hinge pin. Kit includes Standard Actuators with 5/16" SS bolts. The actuators mount at the trailing edge of the blades Kit Contents: 2 each of 12-gauge stainless steel Electro-Polished trim tab blades 2 each of #15054-001 actuators with 6' lead and Deutsch plugs 2 each of #30133-103 20' actuator extension wiring harnesses 2 each of #15085-001 (#116) upper mounting bracket with gland seal    2 each of #50014-001 (#119) lower mounting bracket  1 each of the Lenco owner’s / installation manual All necessary stainless steel mounting hardware Specifications: Suggested Boat Length: 13' to 20' Length of Tab: 9" Width of Tab: 9" Minimum Transom Height: 13.5" Blades: 12 Gauge Stainless Steel Finish: Electro-Polished Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

9" x 12" Standard Performance Trim Tab Kit w/o Switch Kit- 12V Upgraded electro-polished trim blades with stouter 1/4" diameter hinge pin make these Performance Trim Tab Kits a cut above the base level Lenco Standard Mount Kits. Equipped with the same fast response electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges (the 16" x 12" and the 18" x 14" have an 85 degree inside taper) and 1/4" diameter hinge pin. Kit includes Standard Actuators with 5/16" SS bolts. The actuators mount at the trailing edge of the blades Kit Contents: 2 each of 12-gauge stainless steel Electro-Polished trim tab blades 2 each of #15054-001 actuators with 6' lead and Deutsch plugs 2 each of #30133-103 20' actuator extension wiring harnesses 2 each of #15085-001 (#116) upper mounting bracket with gland seal    2 each of #50014-001 (#119) lower mounting bracket  1 each of the Lenco owner’s / installation manual All necessary stainless steel mounting hardware Specifications: Suggested Boat Length: 16' to 26' Length of Tab: 9" Width of Tab: 12" Minimum Transom Height: 13.5" Blades: 12 Gauge Stainless Steel Finish: Electro-Polished Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.