|
Super Cut Compound - 32 fl oz
This is an aggressive compound that easily removes P800 grit and finer sand scratches and oxidation.
Features & Benefits:
For use on gel coats and fiberglass surfaces
Contains no waxes, fillers, or silicones
Designed for use with high-speed, rotary buffers
Water-based formula cleans up easily
Specification:
Size: 32 fl oz
|
29.39 |
|
|
Silicone Rubber Boot
White
5/8" Round Nut
For bat handle toggle switches, push button switches, and panel seal circuit breakers
Provides a watertight seal between switch actuator, bushing, and panel face
Mounting nuts are bonded to eliminate delamination
Thermal characteristics insure reliable performance over a wide temperature range
Inhibits the rotation of switches or circuit breakers subjected to low frequency vibration
Resists discoloring and cracking
|
2.42 |
|
|
Power Cord Adapter f/FL-8 & FL-18 Flasher - 12 VDC - 6'
Power Cord DC Adaptor for FL-8's and FL-18's 12 Volt Power Cable plugs into any standard cigarette lighter socket to power a dash mounted Vexilar flasher. The total length of the cord is 7ft.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
31.20 |
|
|
T-Top Tube Light w/Aluminum Housing - White/Red LED Lights
LED Lights - Hard Wired
High output, low glare
Vibration & shock-resistant LEDs
Less than 1/4 amp draw won't drain battery
Impact-resistant & water resistant ideal for marine & other outdoor uses
T-Top Light
108 LEDs provide high output, low glare light
Switch from white light to red light for chart-reading
Impact-resistant Polycarbonate lens
Polished anodized aluminum housing
Pre-drilled for easy mounting
14' wiring cable to accommodate most tops & bridges
|
158.02 |
|
|
T-Top Tube Light w/Aluminum Housing - White/Blue LED Lights
LED Lights - Hard Wired
High output, low glare
Vibration & shock-resistant LEDs
Less than 1/4 amp draw won't drain battery
Impact-resistant & water resistant ideal for marine & other outdoor uses
T-Top Light
108 LEDs provide high output, low glare light
Switch from white light to red light for chart-reading
Impact-resistant Polycarbonate lens
Polished anodized aluminum housing
Pre-drilled for easy mounting
14' wiring cable to accommodate most tops & bridges
|
158.02 |
|
|
8' Ski/Tube Tow Harness with Pulley - White
Features:
Length: 8 ft.
Min. tensile strength 1800 lbs.
Max rider weight 170 lbs. (1 rider)
|
16.79 |
|
|
N-8 - 49' Nylon Tube 3/8"
Features:
Semi-Rigid Nylon Tube at 3/8 Inch OD (49' Coil, You Cut to length to suit)
Use with HP Compression Olive and Nut Fittings
Supplied in HY EL O/B KIT
|
47.99 |
|
|
Salt Pro Minnow - 5-1/8" - Floating - Ghost White
Salt Pro Minnows lures to catch a variety of game fish and have grown amazingly fast in popularity. Versatile, long casting bait designed for a fast, ripping style retrieve that produces an erratic side-to-side swimming action to draw the predator’s attention. SP Minnow Floating allows the lure to stay sub-surface. Features weight transfer system for easier, longer casts; realistic scale pattern and 3-D eyes; heavy-duty saltwater hooks.
Specifications:
Type: Floating
Depth: 3 Feet
Length: 5-1/8"
Weight: 7/8 oz
Size: 13
Rings: #5
Hooks: #1
|
8.39 |
|
|
529-VW-S 8' VHF Antenna - White
6dB Gain
Digital Antenna's ultimate, award-winning 8' VHF antennas combine 6 dB gain, ruggedness and a pristine finish to give you the most superior antenna available. Even in the harshest conditions, these antennas will maintain their beautiful glossy finish for years. Built to withstand high speeds, these antennas are ideal for radar arches and T-tops on speedboats, yachts and commercial vessels.
Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors.
All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
8' VHF Antennas Feature:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
6dB gain
500 GOLD Series:
Mount: Standard 1"14 threaded base
Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter
Cable: Includes 20' of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
347.44 |
|
|
829-VW-S 8' VHF Antenna - White
6dB Gain
Digital Antenna's ultimate, award-winning 8' VHF antennas combine 6 dB gain, ruggedness and a pristine finish to give you the most superior antenna available. Even in the harshest conditions, these antennas will maintain their beautiful glossy finish for years. Built to withstand high speeds, these antennas are ideal for radar arches and T-tops on speedboats, yachts and commercial vessels.
All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
All 8' VHF Antennas Feature:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
6dB gain
800 Series:
Mount: Stainless steel double female ferrule for mounting 114 threaded base
Connector: Highest quality female SO-239 (UHF)
Cable: Not included use our VHF/AIS cables and two DA645 connectors
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
373.30 |
|
|
549-EW-S 8' Antenna Extender - White
Constructed of high-quality reinforced fiberglass and finished to match Digital Antennas award-winning antennas, our antenna extenders are used to increase the height of an antenna to improve effective range or to place an antenna above on-board obstructions that may interfere with proper radiation.
All extenders mount standard 1"14 threaded mounts. Use a center brace when the combined length of your antenna and all extensions is more than 8'
All Antenna Extenders Feature:
Heavy duty fiberglass
Stainless steel ferrules
1"14 threaded top and base
High gloss urethane finish
Tapered Extender
Dimensions: 8' - 1.5" O.D.
Use center brace
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
438.74 |
|
|
Solid Braid Polyester Cord Hank - 1/8" x 50' - White
Utility Cordage
Features:
Solid braid polyester cord
Mildew and rot resistant
Excellent for many quick tie and flag halyard applications
|
2.33 |
|
|
Cockpit Marine 85MM (3-3/8") Sterndrive Tachometer - White Dial/Chrome Bezel
VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability.
As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform. VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price and performance ratio.
Features:
Works with Gasoline Inboard/Outboard Sterndrive Engines
Uses Common Ring Terminal Wire Connections
0 to 6000 RPM Range
For 12V Electrical Systems
Mounting Hardware Included
"6000 RPM Tachometer
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
67.44 |
|
|
Speaker Spacer for Infinity Reference Series 8" Speakers - 1" - White
Don't have enough depth to install your speaker/subwoofer? Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer.
Specifications:
Thickness - 1"
Edge - 1/16" Round
Outer Diameter - 8.78" or 223 mm
Bolt Hole Circle Diameter - 7.72" or 196 mm
Mounting Hole Diameter - 6.77" or 172 mm
Compatible With 8" Reference:
822MLW and 822MLT
*Sold as a Pair
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
48.18 |
|
|
Speaker Spacer for Infinity Kappa Series 8" Speakers - .50" - White
Don't have enough depth to install your speaker/subwoofer? Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer.
Specifications:
Thickness - .50"
Edge - 1/16" Round
Outer Diameter - 9.5" or 241 mm
Bolt Hole Circle Diameter - 8.09" or 205 mm
Mounting Hole Diameter - 7" or 178 mm
Compatible With 8" Reference:
KAPPA8130MAM and KAPPA8135MAM
*Sold as a Pair
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
42.00 |
|