|
xSonic SS60 Stainless Steel 20° Tilt Thru-Hull Depth/Temp Transducer - 9-Pin - 10M Cable
The SS60 is a stainless steel, thru-hull, tilted, dual-frequency, depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.
Features:
Depth/Temperature - Calculates how deep the water is, so that you can avoid running aground, whilst also incorporating a temperature sensor for accurate water temperature readings
Easy To Install
Dual Frequency - Works at 50 kHz and 200 kHz for good target detail in shallow water and excellent bottom tracking in deep water
Highly Accurate - Provides extremely accurate data
20° Tilt - The 20° tilt is ideal for boats with a 16° to 24° hull deadrise
Low Profile - The low profile housing minimizes drag with just 5mm extending outside of the hull
Plug & Play Connection - Easily connect to NSSevo3, Lowrance HDS G3
|
403.61 |
|
|
Navico Mix & Match Cable for Low-Frequency CHIRP Transducers - 9-Pin
Specifically for use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000W).
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
114.00 |
|
|
Airmar P66 200/50kHz Plastic Transom Mount Transducer (8-pin)
010-10192-21
This plastic transducer is the only offshore transom mount to provide depth, speed and temperature in 1 package.
The 8-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 11 degrees; and mounts on a 2 to 20 degree transom.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
When using with 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
170.99 |
|
|
xSonic TM185HW Wide-Beam Chirp Tramsom Mount Transducer - 9-Pin
Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° Beamwidth, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers
A unique property of the new high frequency transducers is that the Beamwidth is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.
Features:
Depth & temperature
150-250 kHz H frequency
Urethane Housing
1 kW
Wide 25° beam
Weight: 0.45 kg (1.1 lb)
Hull Deadrise: 2° to 20°
Acoustic Window: Urethane
|
975.18 |
|
|
P79 Adjustable In Hull Transducer 50/200kHz with 6-Pin
Features:
In Hull Transducer
Plastic
Adjustable
6-Pin
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
168.41 |
|
|
Adjustable In-Hull Transducer
600 Watt adjustable angled in hull transducer. (P79)
Compatible with the following Echo Sounders:
SL Series: SL755RC, SL760RC , SL1250, and SL1250RC
hsb2 Plus Series: L755RC, L760, L760RC, L1250,and L1250RC
hsb2 HDFI Series: DSM250, L770D, L770DRC, L1260D, and L1260DRC
Compatible hull material: fiberglass
Max Power: 600 W
Frequency: 200/50 kHz
Beam Angles: 200 kHz 11 50 kHz 45
Features:
Depth only.
Can be used in conjunction with the E66019 ST69 speed and temperature sensor
Easily adjusts to any deadrise angle up to 22
Transmits sound waves directly at the bottom so strong echoes are reflected back to the transducer
Can be removed in seconds for servicing or storage
Only the base piece is bonded to the hull. There is no adhesive layer under the transducer face to absorb sound energy
Simplifies in-hull installation
30ft (10m) Cable
|
209.98 |
|
|
CPT-110
Plastic Thru-Hull Transducer for CP100 Sonar Module
Contains two elements, one for the conical beam CHIRP sonar (center frequency 200kHz) the other for the DownVision CHIRP sonar (center frequency 350kHZ)
Contains a temperture sensor
10M Cable
|
339.98 |
|
|
CPT-70 Plastic Thru Hull Transducer
Urethane Through Hull Transducer with Fairing Block. The CPT-70 requires A80332 Adapter Cable (if you have a green locking collar on the unit.)
Features
Plastic Thru Hull
Max Depth: DV=600ft/FF=900ft
Beam Width: 25°/60°
Depth and Temperature
Cable Length: 33ft/10M
Deadrise: 0-25°
|
291.47 |
|
|
B117 Traditional/CW Thru-Hull 50/200kHz, 600W, Transducer, 9-Pin, DT for Simrad, Lowrance & B & G
The B117 features a 50/200 kHz, dual-frequency, single, ceramic element in a low-profile bronze housing. The nearly-flush design minimizes drag with only 5 mm (3/16") extending outside of the hull.
Features:
Depth only or depth and temperature
600 W
Dual-frequency element: 50 kHz with a wide 45° beamwidth for performance to 353 m (1,200'), 200 kHz with a 12° beamwidth for performance to 206 m (700')
Right-angle cable exit saves space and protects the transducer if stepped on
Included rubber washer allows tightening of the hull nut to irregular hull surfaces
Low-profile, bronze housing has minimal drag
Plastic P319 and stainless steel SS60 models are also available to accommodate all hull materials and deadrise angles
Specifications:
Weight: 0.9 kg (2.0 lb.)
Recommended Boat Length: Up to 8 m (25')
Hull Material: Fiberglass or wood
Hull Deadrise: Best performance through 7°. Can accommodate up to 12°.
Acoustic Window: Urethane
Hole Diameter: 51 mm (2")
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
288.35 |
|
|
Adjustable In-Hull Transducer
This in-hull transducer has a patented adjustable feature which ensures that sound waves are transmitted vertically to the bottom on almost any hull with a deadrise up to 22°.
With no hull penetration, installation is easy and high speed performance is maximized.
Specifications:
30" (10 Meter) Cable included
Adjusts to Hull Deadrise Angles from 2° to 22°
2-pin Packard connector (CN0068)
Depth only
Boat Size: Up to 8 m (25’)
Epoxies to aluminum hulls under 3.8 mm (0.125”) thick
Factory P/N SN2010 and AirMar® P/N 31-247-1-01 (Model P79)
**Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
143.99 |
|
|
XPTH-9-HW-MSI-T MEGA SI+/DI+ Dual Spectrum CHIRP Plastic Thru-Hull Transducer with Temp
MEGA Side Imaging+ Plastic Thru-Hull Transducer supports MEGA Imaging/800kHz/455kHz and Dual Spectrum CHIRP 2D Sonar with a CHIRP range of 150-220kHz. Includes built-in temperature sensor, rugged composite design and 30’ cable.
Features:
This accessory is compatible with the following Humminbird products: HELIX 8 CHIRP MEGA SI+ GPS G3N, HELIX 9 CHIRP MEGA SI+ GPS G3N, HELIX 10 CHIRP MEGA SI+ GPS G3N, HELIX 12 CHIRP MEGA SI+ GPS G3N.
Dual Spectrum CHIRP Frequencies: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz
Dual Spectrum CHRIP Max Depth: 1200ft (365m)
MEGA Side Imaging+ Frequencies - Max Range (side-to-side): 455kHz: 440-500 kHz - 800ft (244m), 800kHz: 790-850 kHz - 250ft (76m), MEGA SI+: 1075-1150 kHz - 400ft (m)
MEGA Down Imaging+ Frequencies - Max Depth: 455kHz: 440-500 kHz - 400ft (122m), 800kHz: 790-850 kHz - 125ft (38m), MEGA DI+: 1075-1150 kHz - 200ft (61m)
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
436.39 |
|
|
XPTH 9 20 MSI T MEGA Plastic Thru-Hull Transducer
MEGA SI, MEGA DI, DualBeam PLUS, 20/60/86/55 degrees, 200/83/455/800 kHz and 1.2 MHz.
Temperature built-in, plastic through the hull transducer.
30' cable
Transducer dimensions: 7.34"L x 3"W
Shaft diameter: 1.0"
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
415.37 |
|
|
XPTH 14 HW MSI T Plastic Thru Hull Transducer
SOLIX MEGA Side Imaging+, MEGA Down Imaging+, Dual Spectrum CHIRP plastic thru hull transducer. This transducer supports MEGA Imaging+/800kHz/455kHz and Dual Spectrum CHIRP 2D Sonar with a CHIRP range of 150-220kHz. Includes built-in temperature sensor, rugged composite design and 30’ cable.
Features:
This accessory is compatible with the following Humminbird products: SOLIX 10 CHIRP MEGA SI+ GPS G2, SOLIX 12 CHIRP MEGA SI+ GPS G2, SOLIX 15 CHIRP MEGA SI+ GPS G2
MEGA Side Imaging Frequencies - Max Range (side-to-side): 455kHz: 440-500 kHz - 800ft (244m), 800kHz: 790-850 kHz - 250ft (76m), MEGA SI+: 1075-1150 kHz - 400ft (122m)
MEGA Down Imaging Frequencies - Max Depth: 455kHz: 440-500 kHz - 400ft (122m), 800kHz: 790-850 kHz - 250ft (76m), MEGA DI+: 1075-1150 kHz - 200ft (61m)
Dual Spectrum CHIRP Frequencies: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz
Dual Spectrum CHIRP Max Depth: 1200ft (365m)
Dimensions: L 8.4" x W 2.3" x D 1.0" - Stem Length 5", Stem Diameter 1"
1-Year Limited Warranty
|
436.39 |
|
|
Active Imaging 2-in-1 Transducer & 83/200 Pod In-Hull Transducer with Y-Cable
Allows for connection of an in-hull puck transducer and an Active Imaging 2-in-1 (Side/Down) transducer to the single sonar port of an Elite Ti2 or Elite FS display.
Features:
Active Imaging 2-in-1 Transom Transducer
83/200 Pod/Puck Transducer without temperature
Dual 9-pin Y-cable
|
289.30 |
|
|
B275LH-W Bronze Thru-Hull Transducer - 12-Pin
Get more coverage under your boat with Airmar’s unique wide beam, high frequency Chirp-ready transducers. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band results in superior resolution. The constant wide beamwidth provides twice the coverage under the boat and excellent fish arches on the display compared to most high frequency narrow beam transducer options.
The included high-performance fairing improves broadband performance at speeds over 30 knots (34 MPH).
The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential down to 500'.
The low frequency band and 1 kW of power also provides great deeper water performance. Get the best of both worlds with Airmar’s dual frequency Chirp-ready transducers with wide beam coverage.
Features:
Depth and fast-response water-temperature sensor
1 kW for great deep water performance from the low frequency
Low Frequency: 42 kHz to 65 kHz with maximum depth of 914 m (3000')
25° to 16° beamwidth
High Frequency: 150 kHz to 250 kHz with maximum depth of 152 m (500')
25° constant beamwidth
123 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth
High frequency provides superior shallow water performance, bottom detail and fish target separation
High wide beamwidth provides more coverage under the boat for detecting fish in the upper water column
Bronze transducer housing with high-performance fairing for optimal performance at higher speeds
Recommended boat size: 8 m (25') and above
Hull Type: Fiberglass or wood
Exclusive Xducer ID® technology
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2294.99 |
|