|
Danfoss 180B4143 Piston Set- App 1.5-2.5
|
1344.24 |
|
|
B Size 1" Fishfinder Mount for the Lowrance Hook2 Series
Designed for light duty fresh water use, this B size (1”) aluminum drill-down kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect the double socket arm and round base featuring the AMPS hole pattern. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your kayak or inflatable.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
|
33.32 |
|
|
Locking EZ-ROLL'R™ Cradle for the Garmin nuviCam and dezlCam
The Garmin nuviCam™ & dezlCam™ keeps an extra eye on the road. And RAM Mounts custom cradle for these innovative devices keeps traffic information in your line of sight and keeps the device secure in your vehicle.
The cradle allows for full range of motion of the device camera and integrates the factory Garmin magnetic dock for access to charging. The high-strength composite mount integrates a cable retention system to prevent accidental unplugging. The custom-fit cradle also has a locking option that is installed using press-fit nuts to enhance security. The cradle has two location options to attach the RAM ball (comes with 1" B-Size ball).
Compatible Devices:
Garmin nuviCam™ LMTHD
Garmin dezlCam™ LMTHD
Features:
Open access to all electronic ports including speaker, microphone, SD and mUSB slots
Allows for full range of motion for the camera
Roller design for super smooth placement and removal of the GPS
High strength materials ensure product longevity
Form fitted cradle supports and protects device without vibration
Cradle integrates the factory Garmin magnetic dock
Comes with B sized, 1" ball
Locking attachment allows for a low profile theft deterrent
Lifetime warranty
Made in the U.S.A
Material:
High Strength Composite
|
18.88 |
|
|
100 x 100mm VESA Plate w/1.5" Ball
This RAM-246U consists of a 1.5" rubber ball, connected to a 4.75" square plate with 4x100mm holes and 4x75mm holes in each corner.
Square plate features the VESA hole pattern for connection to a wide variety of devices
Included C size 1.5" RAM® rubber ball allows for connection to any C size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability
Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Plate Size:
4.75" x 4.75"
Note:
The "U" in the part number reflects product packaged in poly bag.
|
22.10 |
|
|
B Size 1" Composite Fishfinder Mount for the Lowrance Hook2 Series
Designed for light duty salt water use, this B size (1”) composite drill-down kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect the double socket arm and round base featuring the AMPS hole pattern. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your kayak or inflatable.
Material:
High Strength Composite and Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
|
26.53 |
|
|
Danfoss 180B4147 Seal Kit For App 1.5-2.5
|
283.08 |
|
|
The 1" B Size Ball from Ram Mount
|
|
|
RAM® Tough-Mag™ 66MM Diameter Ball Base
Looking to mount to a metal surface? The RAM® Tough-Mag™ 66mm diameter base is the powerful and durable solution you’ve been searching for. With a B size ball screwed into a ¼-20” threaded post, simply attach a compatible double socket arm and your desired RAM® device holder. This base features an industrial-strength N35 grade magnet and rubber coating that protects the metal surface you’re attaching the RAM® Tough-Mag™ to.
|
27.36 |
|
|
RAM® Tough-Mag™ 88MM Diameter Ball Base
Looking to mount to a metal surface? The RAM® Tough-Mag™ 88mm diameter base is the powerful and durable solution you’ve been searching for. With a B size ball screwed into a ¼-20” threaded post, simply attach a compatible double socket arm and your desired RAM® device holder. This base features an industrial-strength N35 grade magnet and rubber coating that protects the metal surface you’re attaching the RAM® Tough-Mag™ to.
|
26.78 |
|
|
RAM Stainless Steel U-Bolt Base w/1" Ball
The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The rust proof metal u-bolt accommodates rails in diameter from 1" to 1.25" in diameter. The base also includes black cover caps to be placed over the exposed ends of the u-bolt.
U-Bolt Dimensions:
Accommodates rails from 1" to 1.25" in diameter.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. If you prefer the RAM (RAM-B-231ZU) zinc coated u-bolt motorcycle handlebar base, click here.
|
13.21 |
|
|
RAM STACK-N-STOW Topside Base w/1" Ball
The RAP-395W-BBU consists of a 1" ball, connected to a round base, that contains female grooves and hardware that will allow mounting to all RAM STACK-N-STOW Bait Boards.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
6.19 |
|
|
RAM Zinc Coated U-Bolt Base with 1" Ball
The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. The base also includes black cover caps to be placed over the exposed ends of the u-bolt.
U-Bolt Dimensions:
Accommodates rails from 0.5" to 1.25" in diameter.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
14.82 |
|
|
Square Post Clamp Base 3" Wide with 1.5" Ball
The RAM-247U-3 is a clamp base with 1.5" rubber ball that will connect to rails up to 3" maximum in width.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: C Size 1.5" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 0.9 lbs.
|
38.95 |
|
|
Square Post Clamp Base 4" Wide with 1.5" Ball
The RAM-247U-4 is a clamp base with 1.5" rubber ball that will connect to rails up to 4" maximum in width.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: C Size 1.5" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 1.17 lbs.
|
36.18 |
|
|
EZ-Roll’r™ Locking Cradle for the Garmin Fleet 770, 780 & 790
The EZ-Roll’r™ cradle for the Garmin Fleet 770/780/790 provides a secure fit with quick and easy one-handed attachment and removal of the device from the cradle. With the included cradle lock as a theft deterrent, keep the Garmin Fleet protected when left inside the vehicle. Complete your ideal mounting solution by choosing from a wide variety of compatible RAM® Mounts bases and components to connect to the cradle.
Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
Locking Case Features:
Open access to all electronic ports including speaker and microphone
High strength materials ensure product longevity
Form fitted cradle supports and protects device without vibration
Locks device in place so it cannot be removed without the use of tools
Lifetime warranty
Made in the U.S.A.
Material:
High Strength Composite
|
21.73 |
|