|
xSonic P79 Adjustable 200/50kHz Plastic In-Hull Transducer - 9-Pin
This entry level in-hull transducer with an adjustable deadrise angle makes installation a snap.
The 9-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 22 degree deadrise.
Transducer kit comes with installation instructions*. Follow the instructions carefully to avoid damaging your boat.
*Fiberglass should be no more than 5/8" thick
*Not recommended for cored hulls
|
122.22 |
|
|
B275LH-W Bronze Thru-Hull Transducer - 12-Pin
Get more coverage under your boat with Airmar’s unique wide beam, high frequency Chirp-ready transducers. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band results in superior resolution. The constant wide beamwidth provides twice the coverage under the boat and excellent fish arches on the display compared to most high frequency narrow beam transducer options.
The included high-performance fairing improves broadband performance at speeds over 30 knots (34 MPH).
The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential down to 500'.
The low frequency band and 1 kW of power also provides great deeper water performance. Get the best of both worlds with Airmar’s dual frequency Chirp-ready transducers with wide beam coverage.
Features:
Depth and fast-response water-temperature sensor
1 kW for great deep water performance from the low frequency
Low Frequency: 42 kHz to 65 kHz with maximum depth of 914 m (3000')
25° to 16° beamwidth
High Frequency: 150 kHz to 250 kHz with maximum depth of 152 m (500')
25° constant beamwidth
123 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth
High frequency provides superior shallow water performance, bottom detail and fish target separation
High wide beamwidth provides more coverage under the boat for detecting fish in the upper water column
Bronze transducer housing with high-performance fairing for optimal performance at higher speeds
Recommended boat size: 8 m (25') and above
Hull Type: Fiberglass or wood
Exclusive Xducer ID® technology
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2294.99 |
|
|
SS175HW Wide-Beam CHIRP - 20° Stainless Steel Thru-Hull Transducer - 1kW
Requires Mix and Match Cable
Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers
A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.
Features:
Depth & fast-response water-temperature sensor
High—CHIRPS from 150 kHz to 250 kHz
25° constant beamwidth
100 kHz of total bandwidth from one transducer
Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth
Boat Size: 8 m (25’) and above
Hull Type: Steel or aluminum
Exclusive Xducer ID® technology
Specifications:
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
Weight: 2.7 kg (6 lb)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1386.13 |
|
|
xSonic M135M Medium Chirp 1 kW In-Hull Transducer - 9-Pin
The M135M’s medium frequency delivers the right combination of coverage under the boat, an extended depth range, and the ability to produce clean and accurate target and structure returns in mid- to deeper water. Medium frequency also delivers excellent shallow to mid-depth performance, bottom detail, and fish-target separation. Operating at a frequency range of 85 to 135 kHz, this transducer reveals fish at medium depths up to 457 m (1500 ft) and gives ultra-clear target resolution.
Airmar’s M135M includes a plastic mounting base that is aligned with the centerline and secured inside the hull. Then it is filled with non-toxic antifreeze. The transducer is inserted into the base and adjusted for the proper deadrise offset, ensuring the beam is shooting straight down for maximum echo returns. The eco-friendly coolant is the best medium to transmit through solid fiberglass and into the surrounding water. The major benefit of an in-hull transducer is that there are no protruding features on the exterior of the hull, making it the perfect choice for trailered or lifted boats. Designed for smaller boats up to 11 m (36') with a solid fiberglass hull.
Features:
Depth only
1 kW of power
50 kHz of total bandwidth from one transducer
Recommended for use on planing and displacement hulls
Plastic transducer and mounting base
Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth
Also available as transom (TM185M), thru-hull low-profile (B175M), and thru-hull with fairing (B285M) mounts
Patented Xducer ID® technology
Specifications:
Medium frequency: 85 to 135 kHz
Beamwidth: 16 degrees to 11 degrees
Maximum Depth: 457 m (1500 ft.)
Weight: 4.2 kg (9.2 lb.)
Recommended Boat Length: Up to 11 m (36 ft.)
Hull Material: Solid fiberglass only
Hull Deadrise: Up to 22 degrees
Acoustic Window: Urethane
Transducer Element: One broadband ceramic assembly
Includes: Adjustable mounting base
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
809.66 |
|
|
GT15M-THF 0 Degree 600W SS Thru-Hull Transducer
Designed for reduced drag and optimum sonar performance on midsize fishing and cruising boats, this flush-mounted, 600-watt mid-band CHIRP transducer clearly defines fish arches, structure, and bottom depth returns on the display.
Midband Chirp Traditional Sonar
This 8-pin, 600-watt stainless steel thru-hull transducer features high-definition mid-band CHIRP sonar that clearly defines fish targets and structures down to 1,200’ in saltwater and 1,900’ in freshwater.
Broad Frequency Range
Use the perfect frequency for the waters being fished. Covering the medium frequency range, this transducer pulses from 85–165 kHz, displaying a wide coverage area, crisp fish arches, and accurate depth readings.
Optimum Ping Sensitivity
Offering excellent sonar sensitivity, low noise, high resolution, and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on a compatible chartplotter display.
Thru-Hull Installation
A durable stainless steel housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns.
Auto-ID Technology
Enjoy simple plug-and-play operation with Garmin auto-identification technology — which enables the sonar to configure itself to the transducer being used automatically.
Fits Various Hull Types
Configurable for various boat hull materials, including fiberglass, composite, steel, aluminum, and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0–20 degrees without a fairing block.
Specifications:
Transducer Frequency: Medium band chirp (85-165 Khz)
Transducer Power: 600 W
Transducer Beam Width: 24-16 degrees
Transducer Maximum Depth: 1200 Ft Saltwater; 1900 Ft Freshwater
Transducer Cable Length: 50 ft.
Transducer Depth/Speed/Temperature: Depth, temperature
Transducer Number of Pins: 8-Pin
Transducer Supported Deadrise/Transom Angles: 0 degrees support hull deadrise angles from 0 degrees to 7 degrees
Housing Material: Stainless steel
In the Box:
GT15M-THF transducer
Jam nut
Washer
Thread isolator
Hull isolator
Documentation
|
719.99 |
|
|
Panoptix™ PS70 Thru-Hull Transducer with Fairing Block
SEE FISH LIVE. CATCH FISH DEEP.
The Panoptix PS70 stainless steel thru-hull transducer is powered by Garmin RapidReturn™ sonar, which gives you live sonar views up to 1,000’ below the surface.
Live sonar up to 1,000'
Multiple sonar modes
Wide sonar beam
Image stabilization
Thru-hull mounting
800-watt power output
Garmin RapidReturn Sonar
This sonar sends multiple simultaneous pings through the water column. The result is live sonar capabilities up to 1,000’, giving deep-sea anglers a real-time view of what’s below the surface.
LiveVü™ Down Sonar
See real-time live sonar images up to 1,000’. With Garmin RapidReturn, anglers can see small baitfish and target game fish in real-time. The wide 120-degree beam angle covers huge areas of water.
Traditional Sonar
View crisp, clear fish arches with excellent separation of targets under the boat.
Triple-Beam Sonar
Get a 3-way traditional sonar split that gives sonar returns from the port and starboard directions and targets directly under the boat in an easy-to-understand traditional sonar view. Adjust the beam angles to fine-tune your 3 columns of sonar data.
RealVü™ 3D Sonar
Historical scanning technology helps find fish and build a map of the ocean floor while your boat is moving. It shows the entire water column you have passed over in 3D, from the bottom to the surface, and all fish in between. The True Motion 3D sonar returns feature now follows the vessel’s course over the ground.
Quickdraw Contours Feature
Survey areas of the ocean floor in great detail. New QuickDraw Contours feature improvement allows users to survey wide swaths of the ocean floor, even at depths up to 1,000’.
Live Sonar Display Rate
Panoptix PS70 will display at a minimum of 10 frames per second (6 to 8 times faster than the competition), which results in faster sonar returns.
Wide Sonar Beam
Locate bait and fish quickly with a wide 120-degree by 8-degree sonar beam, which covers more water columns at once.
Image Stabilization
An internal sensor will stabilize sonar returns, giving you a clear view even in rough waters.
Thru-Hull Installation
The stainless steel thru-hull transducer can be flush-mounted or pocket-mounted. A fairing block allows for deadrise angles of 0 to 20 degrees. The optional fairing block can survive high operating speeds and withstand the rough conditions found offshore.
High-Power Sonar
800-watt power output gives you stronger sonar penetration through the water.
In the Box:
PS70 down-looking thru-hull down transducer
Fairing block
Stainless steel thru-hull mounting hardware
Power cable
Network cable 40 ft (12 meters) with network adapter
Documentation
General
Dimension: 8.50" x 4.49" x 9.61"
Weight: 10.12 lbs
Waterproof: IPX7
Transducer Beamwidth: 120° x 8°
Transducer Cable Length: 8 ft + 40 ft Extension
Temperature Range: 0°C to 40°C
Electrical Features:
Power Input; 10-35v
Power Usage: 35w
Fuse: 7.5a
Sonar Features
Frequency: 190-210 kHz
Transmit Power: 800w
Maximum Depth: Saltwater 1000'
Sonar Type: Multi-beam phased array
Connections
Garmin Marine Network ports: 1 (small connector)
Sonar Modes
RealVü 3D Historic: Yes
3-Beam Traditional: Yes
Traditional Sonar Source: Yes
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
5499.99 |
|
|
GT15M-THF 12 Degree 600W SS Thru-Hull Transducer
Designed for reduced drag and optimum sonar performance on midsize fishing and cruising boats, this flush-mounted, 600-watt mid-band CHIRP transducer clearly defines fish arches, structure, and bottom depth returns on the display.
Midband Chirp Traditional Sonar
This 8-pin, 600-watt stainless steel thru-hull transducer features high-definition mid-band CHIRP sonar that clearly defines fish targets and structures down to 1,200’ in saltwater and 1,900’ in freshwater.
Broad Frequency Range
Use the perfect frequency for the waters being fished. Covering the medium frequency range, this transducer pulses from 85–165 kHz, displaying a wide coverage area, crisp fish arches, and accurate depth readings.
Optimum Ping Sensitivity
Offering excellent sonar sensitivity, low noise, high resolution, and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on a compatible chartplotter display.
Thru-Hull Installation
A durable stainless steel housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns.
Auto-ID Technology
Enjoy simple plug-and-play operation with Garmin auto-identification technology — which enables the sonar to configure itself to the transducer being used automatically.
Fits Various Hull Types
Configurable for various boat hull materials, including fiberglass, composite, steel, aluminum, and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0–20 degrees without a fairing block.
Specifications:
Transducer Frequency: Medium band chirp (85-165 Khz)
Transducer Power: 600 W
Transducer Beam Width: 24-16 degrees
Transducer Maximum Depth: 1200 Ft Saltwater; 1900 Ft Freshwater
Transducer Cable Length: 50 ft.
Transducer Depth/Speed/Temperature: Depth, temperature
Transducer Number of Pins: 8-Pin
Transducer Supported Deadrise/Transom Angles: 12 degrees support hull deadrise angles from 8 degrees to 15 degrees
Housing Material: Stainless steel
In the Box:
GT15M-THF transducer
Jam nut
Washer
Thread isolator
Hull isolator
Documentation
|
719.99 |
|
|
GT15M-THF 20 Degree 600W SS Thru-Hull Transducer
Designed for reduced drag and optimum sonar performance on midsize fishing and cruising boats, this flush-mounted, 600-watt mid-band CHIRP transducer clearly defines fish arches, structure, and bottom depth returns on the display.
Midband Chirp Traditional Sonar
This 8-pin, 600-watt stainless steel thru-hull transducer features high-definition mid-band CHIRP sonar that clearly defines fish targets and structures down to 1,200’ in saltwater and 1,900’ in freshwater.
Broad Frequency Range
Use the perfect frequency for the waters being fished. Covering the medium frequency range, this transducer pulses from 85–165 kHz, displaying a wide coverage area, crisp fish arches, and accurate depth readings.
Optimum Ping Sensitivity
Offering excellent sonar sensitivity, low noise, high resolution, and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on a compatible chartplotter display.
Thru-Hull Installation
A durable stainless steel housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns.
Auto-ID Technology
Enjoy simple plug-and-play operation with Garmin auto-identification technology — which enables the sonar to configure itself to the transducer being used automatically.
Fits Various Hull Types
Configurable for various boat hull materials, including fiberglass, composite, steel, aluminum, and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0–20 degrees without a fairing block.
Specifications:
Transducer Frequency: Medium band chirp (85-165 Khz)
Transducer Power: 600 W
Transducer Beam Width: 24-16 degrees
Transducer Maximum Depth: 1200 Ft Saltwater; 1900 Ft Freshwater
Transducer Cable Length: 50 ft.
Transducer Depth/Speed/Temperature: Depth, temperature
Transducer Number of Pins: 8-Pin
Transducer Supported Deadrise/Transom Angles: 20 degrees support hull deadrise angles from 16 degrees to 24 degrees
Housing Material: Stainless steel
In the Box:
GT15M-THF transducer
Jam nut
Washer
Thread isolator
Hull isolator
Documentation
|
719.99 |
|
|
RVM-400 Stainless Steel Thru-Hull 0 Degree Deadrise & 8M Cable
RVM-400 series stainless steel all-in-one through hull transducer brings the power and clarity of RealVision MAX technology to inboard and outboard powerboats. The RVM-400 series transducers are compatible with the RVM1600 sonar module and Axiom 2 Pro RVM chartplotters
The RVM-400 series transducers feature DownVision™, SideVision™, 600-Watt High CHIRP, and 3D sonar capability. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes 3D sonar imagery, automatically compensating for vessel motion. The RVM-400 also has a built-in fast-response water temperature sensor for quick, accurate readings.
The RVM-400 series transducers feature a rugged stainless steel through hull body suitable for fiberglass, wood, or metal hulls. The low-profile design slips effortlessly through the water without causing drag or cavitation.
The RVM-400 is a single, all-in-one transducer suitable for boats with a through-hull transducer mounting position with less than 5° hull deadrise.
*Works with Axiom 2 Pro RVM series, and RVM1600 Sounder Module
Features:
600-Watt traditional CHIRP
High-performance Down and SideVision ceramics
High-speed housing with isolation plate
8M Cable
0° element for hulls with less than a 5° deadrise
|
1540.79 |
|
|
RVM-420 Stainless Steel Thru-Hull Pair, 20 Degree Deadrise & 10M Cable
The RVM-400 series transducers feature DownVision™, SideVision™, 600-Watt High CHIRP, and 3D sonar capability. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes 3D sonar imagery, automatically compensating for vessel motion. The RVM-400 series also has a built-in fast-response water temperature sensor for quick, accurate readings.
The RVM-420 is a port and starboard transducer pair designed for boats with 15° to 25° of deadrise. Each transducer element is tilted at 20° to compensate for the hull deadrise.
The RVM-420 transducer pairs feature titled offset sonar elements inside their surface mount housings. The tilted elements ensure the sonar's beam patterns are correctly aligned for maximum performance while eliminating the drag and turbulence associated with a fairing-blocked transducer installation. Bundled transducer pairs include a Y-Cable harness that internally joins the two transducers together and an 8-meter transducer extension cable.
*Works with Axiom 2 Pro RVM series, and RVM1600 Sounder Module
Features:
600-Watt traditional CHIRP
High-performance Down and SideVision ceramics
High-speed housing with isolation plate
10M Cable
RVM-420 port and starboard pair accommodates hulls with a deadrise between 15° and 25°
|
2399.99 |
|
|
B619 20° Tilt Bronze Thru-Hull Transducer - 8-Pin
Minimize Your Drag
The B619 model have been the standard in low-profile models for many years. Their large sensitive ceramics allow deep echosounding up to 206M (700'). These nearly flush units minimize drag as only 5mm (2/10") of the housing extends outside of the hull. The bronze B619 provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for moreaccurate depth readings.
Applications:
Cruising powerboats and sailboats
Sailboats
Features:
Depth only or Depth and temperature
Fixed 20° tilted versions for 16° to 24° hull deadrise
Right angle cable exit offers low headroom and protection when transducer is stepped on
Included rubber washer allows tightening of the hull nut to irregular hull surfaces
Housings are ABYC H-27 compliant
Optional temperature sensor
Bronze housing
Boat Size: Up to 9M (30')
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
197.99 |
|
|
SS260 Thru-Hull Transducer - Stainless Steel - 1kW - 50/200 - No Plug
Airmar SS260 Housing Style Transducer. Stainless Steel Thru-Hull Transducer with Temp and Fairing Block, 1 kW (No Plug).
Features:
1,000 Watts Power
50/200 kHz, no Diplexer
20/6 degree Beam Angles
Stainless Steel Thru-Hull with Temperature
No Connector
High Speed Fairing Block included
Specifications:
Beam Angle: 20° and 6°
Housing Type: Stainless Steel
Power Rating: 1kW
Frequency: 50kHz and 200kHz
Install Type: Thru-Hull
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1333.33 |
|
|
Navico Mix & Match Cable for Low-Frequency CHIRP Transducers - 9-Pin
Specifically for use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000W).
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
114.00 |
|
|
RVM-412 Stainless Steel Thru-Hull Pair, 12 Degree Deadrise & 10M Cable
The RVM-400 series transducers feature DownVision™, SideVision™, 600-Watt High CHIRP, and 3D sonar capability. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes 3D sonar imagery, automatically compensating for vessel motion. The RVM-400 series also has a built-in fast-response water temperature sensor for quick, accurate readings.
The RVM-412 pairs feature titled offset sonar elements inside their surface mount housings. The tilted elements ensure the sonar's beam patterns are correctly aligned for maximum performance while eliminating the drag and turbulence associated with a fairing-blocked transducer installation. Bundled transducer pairs include a Y-Cable harness that internally joins the two transducers together and an 8-meter transducer extension cable.
The RVM-412 is a port and starboard transducer pair designed for boats with 5° to 15° of deadrise. Each transducer element is tilted at 12° to compensate for the hull deadrise.
*Works with Axiom 2 Pro RVM series, and RVM1600 Sounder Module
Features:
600-Watt traditional CHIRP
High-performance Down and SideVision ceramics
High-speed housing with isolation plate
10M Cable
RVM-412 port and starboard pair accommodates hulls with a deadrise between 5° and 15°
|
2399.99 |
|
|
RV-400 Stainless Steel Thru-Hull RealVision 3D 0°
The RV-400 brings RealVision 3D, CHIRP DownVision, SideVision and High Frequency CHIRP sonar into a low-profile stainless-steel housing. The RV-400 features rugged stainless steel through hull bodies suitable for fiberglass, wood or metal hulls. Each transducer comes with an isolation kit that creates separation between the stainless-steel transducer body and any dissimilar metal hulls, eliminating risk of galvanic corrosion. Ideal for inboard and outboard powerboats, the RealVision 3D Stainless Steel transducers are available as a single transducer for flat hulls or a split pair with Y-cable to accommodate deadrise angles up to 26°. The transducers also have a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, compensating automatically for vessel motion. You’ll enjoy crystal-clear imagery even in waves, swells, and when maneuvering.
|
1594.99 |
|