|
xSonic SS175M Stainless Steel Thru-Hull Tilted Medium CHIRP Transducer - 20° Element - 9-Pin
Features:
Black 9-Pin Connector
Cable Length - 10M (33.0')
SS175M - 1-Internal Broadband Ceramic Assembly
Depth & fast-response water-temperature sensor
Stainless Steel transducer housing
Hull Type: Steel or aluminum
Boat Size: Up to 11M (36’)
Useable shaft length 71mm (2.80”)
Medium-Frequency (M)
Medium—Chirps from 85 kHz to 135 kHz, 24° to 16° beamwidth
50 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth
Medium-frequency benefits include the ability to sound deeper than the high-frequency, along with better target resolution than the low-frequency
|
1212.59 |
|
|
xSonic SS175M Stainless Steel Thru-Hull Tilted Medium CHIRP Transducer - 12° Element - 9-Pin
Features:
Black 9-Pin Connector
Cable Length - 10M (33.0')
SS175M - 1-Internal Broadband Ceramic Assembly
Depth & fast-response water-temperature sensor
Stainless Steel transducer housing
Hull Type: Steel or aluminum
Boat Size: Up to 11M (36’)
Useable shaft length 71mm (2.80”)
Medium-Frequency (M)
Medium—Chirps from 85 kHz to 135 kHz, 24° to 16° beamwidth
50 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth
Medium-frequency benefits include the ability to sound deeper than the high-frequency, along with better target resolution than the low-frequency
|
1212.59 |
|
|
9-Pin Black to 7-Pin Blue Adapter Cable f/XID Transducers
Connects XSONIC Transducers to 7-Pin Blue Units
Use with Airmar Chirp transducers
|
36.24 |
|
|
GO9 XSE Combo with Transom Mount Transducer 83/200 kHz
This kit combines Simrad’s GO9 XSE Chartplotter/Fishfinder with Navico’s 9-Pin High-Speed Skimmer Transducer.
Simrad GO9 XSE Chartplotter/Fishfinder with C-MAP Discover Chart
GO9 XSE Multi-function display with built-in Echosounder, GPS, and Wi-Fi. Super-bright, 9" multi-touch widescreen display with NMEA 2000 and radar interface.
Features:
Easy to use, High brightness 9" tablet-style touchscreen
Built-in advanced echosounder capable of displaying CHIRP, Forwardscan, Sidescan, and Downscan images
Radar port for connection to a Simrad solid-state radar
Direct Audio, Autopilot, communication, and engine connection and control over NMEA2000
Built-in WiFi for mobile device mirroring and internet downloads of charting and software
Easy-to-use multi-touch software
Safely and easily navigate using your favorite cartography (Insight, Navionics, CMAP)
Determine depth, and bottom type and find fish using one of the many echosounder technology options
Quick and simple control of entertainment systems connected to NMEA2000
Vessel circuit control when connected to a C-zone digital switching system
View and monitor engine data while underway
Low Profile Glass dash styling
Super bright widescreen display
Built-in Wi-Fi connectivity
Software update notifications and downloads when connected to the internet
Screen mirroring when connected to a mobile device
Built-in 10 Hz GPS antenna
Dual Micro SD card slot
Built-in echosounder (Broadband & Chirp) (transducer required)
Built-in DownScan and Sidescan Imaging (transducer required)
Built-in Forwardscan Imaging (transducer required)
Radar port for direct connection to Simrad 3G/4G or Halo Radar scanners
Operable with OP40/OP50 Remote
Advanced NMEA2000 networking
Easy-to-Use Multi-Touch Display
The GO9 XSE offers true ease of use with intuitive touchscreen controls that smartphone and tablet users will find instantly familiar. Tap to create or select waypoints, pinch to zoom, or tap and drag to pan smoothly across charts. Simple home screen and menu layouts make all functions quickly accessible, with large and clearly-captioned icons that are easy to recognize and tap.
Chartplotter Navigation & Waypoint Management
The GO9 XSE is a full-featured chartplotter, with support for the widest available range of cartography options including C-MAP® MAX-N+, Navionics®, Insight®, Insight Genesis®, and NV Digital® Charts. Navigate confidently to destinations near and far, with the flexibility to choose charts that best fit your needs and location. Set and record those destinations easily with simple waypoint management: mark waypoints with a touch, and assign meaningful names that make it easy to look up your desired destination whether you've mapped out ten places or a thousand.
Expand Your View with a Simrad Radar Solution
The Simrad GO9 XSE is a full-featured radar display with plug-and-play connectivity to Simrad Broadband 3G, Broadband 4G, and Halo Pulse Compression radar systems. Cruise confidently through crowded harbors, navigate safely in poor visibility, keep an eye on distant weather cells, and find flocks of feeding birds that hint at good fishing spots. Automatic tuning helps to provide a clear radar picture in any conditions, while radar overlay combines radar data with navigational charts for an easy-to-interpret view of your surroundings.
Fully Customisable Interface
The Simrad GO9 XSE is fully customizable to suit your vessel and your favorite on-water activities from power boating, to fishing, to water sports. Customize your home screen with shortcuts to the features you use most, and personalize it with your choice of wallpaper. Adjustable split-screen views and customizable panel layouts let you see everything you need on-screen at once, whatever your activity.
Plan Smarter with TripIntel™ Technology
Designed for power boaters, TripIntel technology tracks and displays the key information you need to plan safe and enjoyable days on the water. Make smart decisions with fuel range overlaid on charts, easy access to current and future tide levels, and a detailed history of your previous trips including the route you took and how your boat performed.
Built-in 10 Hz GPS receiver*
With a high-speed GPS receiver updating your position ten times every second, the Simrad GO9 XSE is ideal for use aboard fast-moving RIBs and powerboats. Watch your boat's movement tracked smoothly, accurately, and in real-time, without 'jumping' from point to point on the display.
Cruise Charting View
Designed with power boating in mind, the Simrad GO9 XSE offers a unique Cruise Charting page that brings together crucial navigation data and charts in one easily readable display. Choose the information most relevant to your cruising style and on-water activities with the ability to edit on-screen data items.
NMEA 2000® Engine Monitoring & Instrumentation
The Simrad GO9 XSE connects to any NMEA 2000®-capable equipment aboard your vessel including outboard and inboard engines; fuel level and flow meters; speed, heading, and water temperature sensors; and much more. Create your own custom digital instrument displays, bringing a wealth of information to even the most crowded dash while keeping a clean look with as few gauges as possible.
Watch Your Depth with Built-in Sonar
Knowing the true depth beneath your hull can help you enjoy your time on the water with fewer worries, and makes it easier to locate suitable anchorages in unfamiliar waters. With built-in sonar, just add a suitable sonar transducer for accurate, real-time depth tracking. A scrollable depth history view lets you track back and easily set waypoints for promising anchorages, while StructureScan Imaging combines DownScan and SideScan sonar to offer a picture-like view of the bottom beneath your vessel.
Cruise Confidently with ForwardScan Sonar
Using an optional ForwardScan transducer, this forward-looking sonar technology provides a clear two-dimensional image of the bottom in front of your vessel, allowing you to navigate shallow or poorly charted waters with confidence. With real-time updates and a forward-looking view of up to eight times your current depth, ForwardScan lets you relax and enjoy a safer day on the water.
Find fish with CHIRP & StructureScan® HD sidescan imaging
Whether fishing is your life or just a casual hobby, any fishing trip will benefit from the extensive array of built-in sonar technology on the Simrad GO9 XSE. Add a suitable transducer, available separately or bundled with your display, and the GO9 XSE works as a powerful fishfinder with CHIRP-enabled broadband sonar for clear detection of fish throughout the water column. With an optional HDI or Active Imaging 3-in-1, the GO9 XSE also offers StructureScan HD sidescan imaging for a picture-like view of the fish-holding structure beneath and around your boat.
Simrad SonicHub®2 & Bluetooth® Audio Integration
If you're not at home on the water without a good soundtrack, the Simrad SonicHub®2 marine audio system is the perfect companion to a GO9 XSE display. Stream music from Bluetooth® connected tablets, smartphones, and other mobile devices, play MP3 files from a USB flash drive or listen to the SonicHub 2's built-in AM/FM radio. SonicHub 2 brings complete control of your audio entertainment to your GO9 XSE display, eliminating the need for a separate stereo head unit and letting you listen to your music, your way.
GoFree™ cloud enabled with Built-in Wi-Fi
With Wi-Fi built-in, the Simrad GO9 XSE provides direct access to GoFree cloud services including easy wireless map downloads, software updates, and more. Whether hooked up to your home Wi-Fi with your boat trailered in the driveway, logged in to your marina's Wi-Fi, or tethered to your smartphone out on the lake, you can access GoFree cloud services anywhere you have an internet connection. On the water, GoFree connects the Simrad GO9 XSE to your mobile devices, mirroring your display's screen on your smartphone or giving you full remote control from your tablet with the free GoFree Controller app.
SiriusXM Weather Integration
The Simrad GO9 XSE is the only GO Series display compatible with SiriusXM Marine satellite weather, via the optional WM-4 expansion module, for real-time access to weather information right on your display. With onboard access to weather radar, surface buoy reports, NOAA Marine Zone forecasts, and more, you can check out the conditions offshore before you even leave the dock. SiriusXM Marine is a subscription service, exclusively available within North America.
* Built-in GPS receiver works in any bracket-mount installation, and when flush-mounted with most fiberglass hulls. When flush-mounted in a metal hulled vessel, an external GPS receiver such as the Simrad GS25 may be required.
Specifications:
Casing: PC/ABS
Operating temp: -15°C to +55°C (+5°F to +131°F)
Water ingress: IPX6 and 7
Weight (excluding mounting hardware): 1.315 kg (2.9 lbs) - GO9 XSE
Screen brightness: 1200 nits
Screen resolution: 480 x 800 (H x W)
Viewing angle in degrees (typical value at contrast ratio = 10): L/R: 70, top: 50, bottom: 60
Operating voltage: 10 - 17 V DC
Current draw at 13.6 V (sonar off, max B/L): 1 A
Low power standby mode: yes
Protection: reverse polarity and temporary over-voltage to 36 V
Alarm output current: 1 A max
Processor: iMX61 single core
Conformity: CE, C-Tick
NMEA 2000 (compliant):1 port (Micro-C male) -, network load 1 LEN: 1 combined port Power and NMEA 2000 (7 pin connector)
Sonar 1 port (9-pin connector) Radar 1 port (5-pin Ethernet connector)
Card reader: Dual microSD
Comes With:
000-13702-001 - Gimbal bracket, GO9,V9
000-13700-001 - GO9 / V9 Bezel Replacement
000-13699-001 - GO9/V9 Dash mount kit
000-00128-001 - Power Cable
000-13698-001 - GO9 XSE Suncover
C-MAP Discover Chart Features
Full-Featured Vector Charts
Custom Depth Shading
High-Resolution Bathymetry
Easy-Routing
Tides & Currents
Navico 9-Pin High-Speed Skimmer Transducer 83/200 kHz
9-Pin High-Speed Skimmer M/H PK ASY: 83/200 kHz transom-mount skimmer depth/temp - Black 9-pin connector.
Features:
Transom Transducer
High-Speed Skimmer
83/200kHz with Temp
9-Pin Connector
|
838.80 |
|
|
GO9 XSE Combo with Transom Mount Transducer 83/200 kHz & HALO20 Package
This kit combines Simrad’s GO9 XSE with Navico’s 9-Pin High-Speed Skimmer Transducer and Simrad’s HALO20 20" Radar Dome.
Simrad GO9 XSE Chartplotter/Fishfinder w/C-MAP Discover Chart
GO9 XSE Multi-function display with built-in Echosounder, GPS, and Wi-Fi. Super-bright, 9" multi-touch widescreen display with NMEA 2000 and radar interface.
Features:
Easy to use, High brightness 9" tablet-style touchscreen
Built-in advanced echosounder capable of displaying CHIRP, Forwardscan, Sidescan, and Downscan images
Radar port for connection to a Simrad solid-state radar
Direct Audio, Autopilot, communication, and engine connection and control over NMEA2000
Built-in WiFi for mobile device mirroring and internet downloads of charting and software
Easy-to-use multi-touch software
Safely and easily navigate using your favorite cartography (Insight, Navionics, CMAP)
Determine depth, and bottom type and find fish using one of the many echosounder technology options
Quick and simple control of entertainment systems connected to NMEA2000
Vessel circuit control when connected to a C-zone digital switching system
View and monitor engine data while underway
Low Profile Glass dash styling
Super bright widescreen display
Built-in Wi-Fi connectivity
Software update notifications and downloads when connected to the internet
Screen mirroring when connected to a mobile device
Built-in 10 Hz GPS antenna
Dual Micro SD card slot
Built-in echosounder (Broadband & Chirp) (transducer required)
Built-in DownScan and Sidescan Imaging (transducer required)
Built-in Forwardscan Imaging (transducer required)
Radar port for direct connection to Simrad 3G/4G or Halo Radar scanners
Operable with OP40/OP50 Remote
Advanced NMEA2000 networking
Easy-to-Use Multi-Touch Display
The GO9 XSE offers true ease of use with intuitive touchscreen controls that smartphone and tablet users will find instantly familiar. Tap to create or select waypoints, pinch to zoom, or tap and drag to pan smoothly across charts. Simple home screen and menu layouts make all functions quickly accessible, with large and clearly-captioned icons that are easy to recognize and tap.
Chartplotter Navigation & Waypoint Management
The GO9 XSE is a full-featured chartplotter, with support for the widest available range of cartography options including C-MAP® MAX-N+, Navionics®, Insight®, Insight Genesis®, and NV Digital® Charts. Navigate confidently to destinations near and far, with the flexibility to choose charts that best fit your needs and location. Set and record those destinations easily with simple waypoint management: mark waypoints with a touch, and assign meaningful names that make it easy to look up your desired destination whether you've mapped out ten places or a thousand.
Expand Your View with a Simrad Radar Solution
The Simrad GO9 XSE is a full-featured radar display with plug-and-play connectivity to Simrad Broadband 3G, Broadband 4G, and Halo Pulse Compression radar systems. Cruise confidently through crowded harbors, navigate safely in poor visibility, keep an eye on distant weather cells, and find flocks of feeding birds that hint at good fishing spots. Automatic tuning helps to provide a clear radar picture in any conditions, while radar overlay combines radar data with navigational charts for an easy-to-interpret view of your surroundings.
Fully Customisable Interface
The Simrad GO9 XSE is fully customizable to suit your vessel and your favorite on-water activities from power boating, to fishing, to water sports. Customize your home screen with shortcuts to the features you use most, and personalize it with your choice of wallpaper. Adjustable split-screen views and customizable panel layouts let you see everything you need on-screen at once, whatever your activity.
Plan Smarter with TripIntel™ Technology
Designed for power boaters, TripIntel technology tracks and displays the key information you need to plan safe and enjoyable days on the water. Make smart decisions with fuel range overlaid on charts, easy access to current and future tide levels, and a detailed history of your previous trips including the route you took and how your boat performed.
Built-in 10 Hz GPS receiver*
With a high-speed GPS receiver updating your position ten times every second, the Simrad GO9 XSE is ideal for use aboard fast-moving RIBs and powerboats. Watch your boat's movement tracked smoothly, accurately, and in real-time, without 'jumping' from point to point on the display.
Cruise Charting View
Designed with power boating in mind, the Simrad GO9 XSE offers a unique Cruise Charting page that brings together crucial navigation data and charts in one easily readable display. Choose the information most relevant to your cruising style and on-water activities with the ability to edit on-screen data items.
NMEA 2000® Engine Monitoring & Instrumentation
The Simrad GO9 XSE connects to any NMEA 2000®-capable equipment aboard your vessel including outboard and inboard engines; fuel level and flow meters; speed, heading, and water temperature sensors; and much more. Create your custom digital instrument displays, bringing a wealth of information to even the most crowded dash while keeping a clean look with as few gauges as possible.
Watch Your Depth with Built-in Sonar
Knowing the true depth beneath your hull can help you enjoy your time on the water with fewer worries, and makes it easier to locate suitable anchorages in unfamiliar waters. With built-in sonar, just add a suitable sonar transducer for accurate, real-time depth tracking. A scrollable depth history view lets you track back and easily set waypoints for promising anchorages, while StructureScan Imaging combines DownScan and SideScan sonar to offer a picture-like view of the bottom beneath your vessel.
Cruise Confidently with ForwardScan Sonar
Using an optional ForwardScan transducer, this forward-looking sonar technology provides a clear two-dimensional image of the bottom in front of your vessel, allowing you to navigate shallow or poorly charted waters with confidence. With real-time updates and a forward-looking view of up to eight times your current depth, ForwardScan lets you relax and enjoy a safer day on the water.
Find fish with CHIRP & StructureScan® HD sidescan imaging
Whether fishing is your life or just a casual hobby, any fishing trip will benefit from the extensive array of built-in sonar technology on the Simrad GO9 XSE. Add a suitable transducer, available separately or bundled with your display, and the GO9 XSE works as a powerful fishfinder with CHIRP-enabled broadband sonar for clear detection of fish throughout the water column. With an optional HDI or Active Imaging 3-in-1, the GO9 XSE also offers StructureScan HD sidescan imaging for a picture-like view of the fish-holding structure beneath and around your boat.
Simrad SonicHub®2 & Bluetooth® Audio Integration
If you're not at home on the water without a good soundtrack, the Simrad SonicHub®2 marine audio system is the perfect companion to a GO9 XSE display. Stream music from Bluetooth® connected tablets, smartphones, and other mobile devices, play MP3 files from a USB flash drive or listen to the SonicHub 2's built-in AM/FM radio. SonicHub 2 brings complete control of your audio entertainment to your GO9 XSE display, eliminating the need for a separate stereo head unit and letting you listen to your music, your way.
GoFree™ cloud enabled with Built-in Wi-Fi
With Wi-Fi built-in, the Simrad GO9 XSE provides direct access to GoFree cloud services including easy wireless map downloads, software updates, and more. Whether hooked up to your home Wi-Fi with your boat trailered in the driveway, logged in to your marina's Wi-Fi, or tethered to your smartphone out on the lake, you can access GoFree cloud services anywhere you have an internet connection. On the water, GoFree connects the Simrad GO9 XSE to your mobile devices, mirroring your display's screen on your smartphone or giving you full remote control from your tablet with the free GoFree Controller app.
SiriusXM Weather Integration
The Simrad GO9 XSE is the only GO Series display compatible with SiriusXM Marine satellite weather, via the optional WM-4 expansion module, for real-time access to weather information right on your display. With onboard access to weather radar, surface buoy reports, NOAA Marine Zone forecasts, and more, you can check out the conditions offshore before you even leave the dock. SiriusXM Marine is a subscription service, exclusively available within North America.
* Built-in GPS receiver works in any bracket-mount installation, and when flush-mounted with most fiberglass hulls. When flush-mounted in a metal hulled vessel, an external GPS receiver such as the Simrad GS25 may be required.
Specifications:
Casing: PC/ABS
Operating temp: -15°C to +55°C (+5°F to +131°F)
Water ingress: IPX6 and 7
Weight (excluding mounting hardware): 1.315 kg (2.9 lbs) - GO9 XSE
Screen brightness: 1200 nits
Screen resolution: 480 x 800 (H x W)
Viewing angle in degrees (typical value at contrast ratio = 10): L/R: 70, top: 50, bottom: 60
Operating voltage: 10 - 17 V DC
Current draw at 13.6 V (sonar off, max B/L): 1 A
Low power standby mode: yes
Protection: reverse polarity and temporary over-voltage to 36 V
Alarm output current: 1 A max
Processor: iMX61 single core
Conformity: CE, C-Tick
NMEA 2000 (compliant):1 port (Micro-C male) -, network load 1 LEN: 1 combined port Power and NMEA 2000 (7 pin connector)
Sonar 1 port (9-pin connector) Radar 1 port (5-pin Ethernet connector)
Card reader: Dual microSD
Comes With:
000-13702-001 - Gimbal bracket, GO9,V9
000-13700-001 - GO9 / V9 Bezel Replacement
000-13699-001 - GO9/V9 Dash mount kit
000-00128-001 - Power Cable
000-13698-001 - GO9 XSE Suncover
C-MAP Discover Chart Features
Full-Featured Vector Charts
Custom Depth Shading
High-Resolution Bathymetry
Easy-Routing
Tides & Currents
Navico 9-Pin High-Speed Skimmer Transducer 83/200 kHz
9-Pin High-Speed Skimmer M/H PK ASY: 83/200 kHz transom-mount skimmer depth/temp - Black 9-pin connector.
Features:
Transom Transducer
High-Speed Skimmer
83/200kHz with Temp
9-Pin Connector
Simrad HALO20 20" Radar Dome with 10M Cable
Unrivalled Short-To-Mid-Range Performance
Extend your view from the bow of your boat out to 24 nautical miles with pulse-compression radar technology that not only delivers a powerful mix of short and long-range detection but provides precise target definition with minimal clutter.
Better Situational Awareness, Collision Avoidance
HALO20 radar delivers a comprehensive range of features to enhance your situational awareness and on-water safety. Monitor selected collision hazards with MARPA target tracking, tracking up to 10 targets, or 20 in dual range. Whether you’re navigating through crowded waterways or contending with poor visibility, HALO20 radar cuts through the clutter to give you a clear and current picture of your surroundings.
Ready Instantly
HALO20 Radar wakes instantly from its low-power standby mode, delivering radar coverage exactly when and where you want it. Even if your HALO20 radar is completely powered down start-up is a matter of seconds, not minutes like traditional pulse radar.
Easy to Use
Harbor, offshore, weather, and custom modes tune HALO20 Radar’s advanced signal processing to help ensure that targets can be seen vividly – even in the toughest environmental conditions.
Features:
10W Pulse Compression
24 nm range from a compact 20-inch dome
Unrivalled short range
Radiation safe
Easy operation with harbor, offshore, and weather mode
MARPA target tracking
InstantOn™
Low Power Consumption
Guard Zones
Included:
20" dome
10m cable (000-14548-001)
Ethernet Adapter Cable (000-14552-001)
|
2398.80 |
|
|
TM185C-HW-MM CHIRP Transducer Transom Mount Needs Mix & Match Cable
Get more coverage under the boat with Airmar's wide beam Chirp. Offering a high frequency range of 150-250 kHz and a constant 25° Beamwidth, this transducer is truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using this wide beam transducer will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers.
A unique property of the high frequency transducers is that the Beamwidth is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's wide beam format also creates crisper and larger return images on the display.
Features:
CHIRPS across the following bandwidths: — High-Frequency: 150-250 kHz
25° Constant Beamwidth
1kW (1,000 Watt) RMS Power
Depth Range: 600'-800'
Depth & fast-response water-temperature sensor
Urethane housing and stainless steel kick-up mounting bracket
Boat Size: 8 m to 12 m (25' to 40')
Boat Type: Outboards; I/O
Hull Type: Fiberglass, Wood, Metal
Can retrofit to existing TM258, TM260, TM265, and TM275 bracket
Needs Mix & Match Cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1224.20 |
|
|
Navico 9-Pin Mix & Match Chirp Cable - 1M
Airmar's 9-Pin Mix & Match Chirp Cable for Navico Med and High or Highwide Transducers
Features:
Length: 1M
9-Pin
for Med, High, and Highwide Transducers, Single Chirp Transducers
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
114.00 |
|
|
B75M 600W Medium Frequency CHIRP Transducer 20° Tilt Single Operation Cable for 1 Transducer Install
The B75's offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel.
Specifications:
Beam: 24 to 16 Degrees Medium-Frequency
Deadrise Angle: 16 to 24 Degree
Frequency: 80-130 kHz Medium Frequency CHIRP
Material: Bronze
Maximum Depth: 900'
Sonar: CHIRP Sonar, Depth and Temperature
Type: Thru-Hull
|
939.12 |
|
|
TM165HW Chirp High Wide 600W Transom Mount Transducer - Requires Adapter Cable
Replacing a non-Chirp or single frequency transducer with the AIRMAR TM165HW (High Wide) 600W Chirp-ready transom mount transducer provides anglers with an inexpensive and easy performance upgrade to their current sonar systems. The TM165HW is legendary for producing the finest detail and largest coverage area of any transom mounted model in its class.
The TM165HW is perfect for fishing boats up to 25 feet (8 meters) and recommended for planing hulls made from fiberglass, metal or wood - both outboard and IO.
TM165HW delivers large, crisp return images on the display with a noise-free, clear picture of the action below. Better coverage from top to bottom with stronger, well-defined fish targets.
Super Wide 30° Average Beamwidth Achieves 3x the Coverage Under the Boat as Compared to Standard High Frequency Chirp-ready Transducers (eg, the popular B75H)
The TM165HW is compatible with the following sonar brands and models:
Lowrance: All models compatible except Hook series
Humminbird: SM300; Helix and Solix can be set manually
Garmin: GPSMAP 7600, 8600, 7X2/9X2/10x2/12x2, GSD26
Raymarine: compatible with all models
Simrad: compatible with all models
Features:
Depth and fast-response water-temperature sensor
Requires Mix and Match cable
600 W with a maximum depth of 152 m (500')
High Frequency: 150 kHz to 250 kHz for superior shallow water performance, bottom detail and fish target separation
High-wide beamwidth provides more coverage under the boat for detecting fish in the upper water column
Super wide 30° average beamwidth for superior coverage under the boat and maximum detection area
High-performance, low-profile design provides excellent resolution at speed when installed properly
Exclusive Xducer ID® technology
The TM165HW is an AIRMAR Mix and Match transducer. 600W Mix and Match transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
421.02 |
|
|
Navico Mix & Match Cable for Low-Frequency CHIRP Transducers - 9-Pin
Specifically for use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000W).
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
114.00 |
|
|
S2016 16" Fishfinder w/Broadband Sounder™ Module & CHIRP Technology - Wide Screen
The Simrad S2016 Fish Finder combines the Broadband Sounder™ module with CHIRP technology, 16" widescreen display for an extensive on-screen history, and intuitive keypad-driven operation. Robust and offering both bracket and flush-mount installation options, the S2016 was designed to meet the need for a dedicated fish finder display aboard coastal and offshore fishing vessels.
Key features:
Dedicated fish-finder with integrated Broadband Sounder™ module and CHIRP technology
High depth penetration and ping speed
Vertical heave compensation
16" 1366 x 768-pixel high-definition widescreen LCD
HDMI output for mirrored secondary display
See clearly with White Line, White Marker, and Color Erase features
Simple operation with 8 direct-access menu keys
Bracket and flush mounting options (bracket included)
Full-sized SD card slot for logs and software updates
Ethernet, NMEA0183 & NMEA2000 connectivity
Integrated Single-Channel Broadband Sounder™ Module
The S2009 includes a Broadband Sounder™ module with plug-and-play transducer port, compatible with Simrad and Airmar transducers equipped with blue 7-pin connectors. Adapters are available to allow easy and cost-effective retrofit of existing Simrad, Airmar, and other third-party transducers.
CHIRP Technology
The S2009 includes CHIRP technology, which utilizes frequency-swept sonar pulses to deliver higher resolution, improved target separation, and greater image clarity than traditional sonar at all depth ranges. Simrad technology makes CHIRP available not only on special-purpose CHIRP transducers, but also via traditional single-frequency transducers. Vessels with a suitable transducer already installed can add CHIRP technology simply by installing an S2000-series Fish Finder, offering an extremely cost-effective upgrade.
Vertical Heave Compensation
Heave compensation eliminates the vertical effects of wave action from sonar depth measurements, enhancing the accuracy and consistency of bottom tracking in rough conditions. This feature requires a compatible NMEA 2000®-connected satellite compass such as the Simrad HS60 or HS70 to provide real-time heave data.
16" Widescreen Display
With a compact 9" LCD in portrait orientation, the S2009 maximises screen size where limited mounting space is available. Its portrait orientation is well suited to fishing applications, displaying the water column with a high level of vertical detail.
White Line, White Marker and Colour Erase
The S2009 Fish Finder offers a range of features to quickly and easily adjust the on-screen image to suit the task at hand.
-White Line clearly separates the water column from the bottom with a high-contrast white line, for enhanced bottom visibility.
-White Marker allows any user-selected colour from the fish finder image to be replaced with high-contrast white, highlighting specific sonar echoes corresponding to fish or other targets of interest.
-Colour Erase allows any selected colour to be blended into the background, eliminating unwanted noise or unimportant features from the display.
Keypad Operation with Direct-Access Menu Keys
The S2009 is operated by an integrated keypad and rotary dial. Direct-access menu keys beside the display provide intuitive control of on-screen menu options, for one-button access to key settings and features. With reliable, long-life operation and clear tactile feedback, the S2009's large buttons are suitable for use in rough seas, while travelling at speed, and with wet or gloved hands.
Rugged Design with Flexible Mounting Options
The S2009 may be flush-mounted, ideal for installation aboard new vessels. Alternatively, the included gimbal bracket is well suited to outside installations or pilothouse refits. With watertight rear connectors, the S2009 is IPX7 water-resistant from all sides, in either flush- or bracket-mount installation.
Networking & Expansion
The S2009 includes Ethernet connectivity to share sonar data with other Simrad systems including NSO evo2 and NSS evo2 multifunction displays. The S2009 may also be used as a dedicated fish finder display for NSS evo2 systems, receiving sonar data from an NSS evo2 display's built-in Broadband Sounder™ module. Other devices may be networked via the S2009's NMEA 2000® and NMEA 0183® ports, enabling additional functionality such as waypoint marking and sharing with compatible devices.
HDMI Output for Display Mirroring
An HDMI output gives the option of a secondary monitor mirroring the S2016's primary display, allowing fish finder data to be made visible at two separate stations or duplicated on a larger bulkhead-mounted screen. The S2016 is compatible with Simrad MO-series marine monitors, and other standard HDMI-capable displays.
Sonar Log Recording - ciBioBase and Insight Genesis Compatible
The S2009 is capable of recording sonar history to a full-sized SD memory card, which may be easily inserted and removed via a waterproof access hatch on the front panel. Recorded sonar logs may be used with the cloud-based Insight Genesis™ service to create custom fishing charts, or BioBase GIS software to create detailed aquatic bathymetric and vegetation maps for survey and research purposes.
Specifications:
Languages: 40 languages
Screen Brightness: 400 cd/m2
Echosounder Max Depths: 3,000M / 10,000' (transducer-dependent)
Echosounder Transducers: Standard Broadband and single-channel CHIRP Transducers
Echosounder Frequencies: CHIRP 28-38 kHz, 40-60 kHz, 85-145 kHz, 130-210kHz, Broadband 28kHz, 38kHz, 50kHz, 83kHz, 200kHz
Display Size: 16" Widescreen
Display Resolution: 1366 x 768
Display Type: 16" LED-backlit Color TFT LCD
Connectors: 1x NMEA0183, 1x NMEA2000, 1x Ethernet, 1xHDMI output
Waterproof Standard/rating: IPx7
Product Width: 455.5mm / 17.93"
Product Depth:82.3mm / 3.24"
Product Height: 260.1mm / 10.24"
Power Supply (Supply Voltage): 10.8-31.2 V DC
|
3630.00 |
|
|
B275LHW Bronze Thru-Hull CHIRP Transducer - 12-Pin
Bronze, Thru-Hull CHIRP Transducer with Temp, with 12-Pin Connector, Low-Freq: 42-65 kHz, High-Freq: 150-250 kHz.
The 275LH-W series transducers are truly broadband at its best. Paired with Furuno’s DFF1-UHD, the B275LH-W provides a high frequency range of 150-250Khz and a constant 25° beamwidth. The “W” stands for wide and that’s what the B275LH-W really delivers. Unlike traditional high frequency (200kHz) transducers that provide narrow performance, this unique, new wide beam/high frequency design achieves over six times the coverage under the boat compared to standard high-frequency CHIRP Transducers.
The B275LH-W is also compatible with the FCV295 and FCV1150 variable frequency Fish Finders, providing the same frequency range with a 25° wide beamwidth provided at every frequency.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2240.00 |
|
|
PM111 LHW CHIRP 2kW Wide-Beam Chirp-Ready Pocket/Keel Mount - No Connector
Get more coverage under your boat with Airmar’s unique wide-beam, high-frequency, Chirp-ready transducer. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high-frequency band results in superior resolution. The constantly wide beam provides twice the coverage and excellent fish arches on the display compared to most high-frequency, narrow-beam transducer options.
The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essentially down to 152 m (500').
The low-frequency band and 2 kW of power also support great deep-water performance. Get the best of both worlds with Airmar’s dual-frequency, Chirp-ready transducer with wide-beam coverage.
Features:
The depth and fast-response water-temperature sensor
2 kW of power for great deep-water performance from the low frequency
2 kW low frequency: 38 to 75 kHz
19° to 10° port-starboard beamwidth
10° to 5° fore-aft beamwidth
Maximum depth of 1,829 m (6,000')
1 kW high frequency: 150 to 250 kHz
25° constant beamwidth
Maximum depth of 152 m (500')
137 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50, 68, and 200 kHz plus everything else in the bandwidth
High frequency delivers superior shallow-water performance, bottom detail, and fish-target separation
High wide beamwidth yields more coverage for detecting fish in the upper-water column
Urethane housing designed for custom mounting in a cavity
Also available in an external (R109LHW) mount
Exclusive Xducer ID® technology
Specifications:
Weight: 13.6 kg (30 lb.)
Recommended Boat Length: 12 m (40') and above
Hull Material: Solid fiberglass only
Hull Deadrise: Accommodates any deadrise angle based on custom cavity construction
Acoustic Window: Epoxy/urethane
Transducer Element: 16 internal broadband ceramic assemblies
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3235.97 |
|
|
GT8HW-IF Ice Fishing, Plastic, High Wide CHIRP Transducer - 150-240kHz, 250W, 4-Pin
GT8HW-IF transducer is perfect for ice fishermen who want clear bottom definition under the ice as well as crisp, clear and wide fish arches with excellent target separation. The wider beam width - up to 24 degree beam angle - provides a larger coverage area in the water.
The 4-pin transducer features high wide band CHIRP traditional sonar (150-240 kHz) and has a power rating of 250 W. Its shape and beam widths have been optimized for ice fishing and feature a silicon-coated cable that remains flexible in harsh winter conditions.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
116.99 |
|
|
GT15M-IH Plastic, In-Hull, Mid-Band CHIRP Transducer - 85-165kHz, 600W, 8-Pin
GT15M-IH transducer is ideal for boats that want to install the transducer inside a fiberglass hull and not on the transom where cavitation could cause issues. It can be used with a hull deadrise angle between 0 and 25 degrees and is excellent for boats traveling at high speeds that want to maintain accurate depth readings.
The 8-pin transducer with 4 plastic tanks features mid-band CHIRP traditional sonar (85-165 kHz) and has a power rating of 600 W. It can be used in conjunction with a GT30-TM transducer and an adapter cable so you can maintain depth at high speeds and scanning capabilities at trolling speeds.
For installation, follow the included instructions carefully to avoid damaging your boat.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
179.99 |
|