BURKS 22609-9.00, Wet End Kit for Series G9-2 Pump kit Only* for all G9-2 Series, 254-256JM Nema frame size only (*no motor – full sized impeller – impeller trim required). Catalog # 22609-9.00 For assembly on motor with a 254-256JM Nema frame Motor (check motor specs.). Full size impeller is 9 Inches Diameter. NOTE : Impeller diameter must be trimmed to suit Horsepower or previous Impeller diameter.

BURKS 22659-9.00, Wet End Kit for Series G9-2-1/2 Pump kit Only* for all G9-2-1/2 Series, 284-326JM Nema frame size only (*no motor – full sized impeller – impeller trim required). Catalog # 22659-9.00 For assembly on motor with a 284-326JM Nema frame Motor (check motor specs.). Full size impeller is 9 Inches Diameter. NOTE : Impeller diameter must be trimmed to suit Horsepower or previous Impeller diameter.

FINISH THOMPSON A101981-9 Housing - PVDF

Tuthill P606-9 Lock Nut

Tuthill P601-9 Ball Bearing

BURKS 20522-9-MV REPAIR KIT FOR CS9MV Pumps The Burks 20522-9-MV is a repair kit for all CS9MV series pumps with Viton seal, comes with the impeller, raceway, Viton shaft seal, Viton o-ring gasket, suction sleeve, raceway screws, impeller locknut, shaft key and instructions.   There is a 6 to 8 week Lead Time from time of order.

Attention Sailers!!! Do you have a Binnacle mounted compass that is looking really bad? Now is the time to update to a New Ritchie DNP-200 Navigator Compass. We have one in stock in our clearance section selling for have the price. Ritchie Navigator Compass Navigator Compass Features: 4-1/2" PowerDamp Flat Card Dial with Large Numerals Brushed Stainless Housing Ideal for both Power and Sail Boats Fits all Popular Sailboat Steering Pedestals Exclusive Built-in Green NiteVu Night Illumination Built-in Compensators to Easily Adjust for Deviation Scientifically Matched Sapphire Jewel and Hardened Steel Pivot Dial Movement Internal Gimbal Systems for Maximum Stability During Adverse Pitch and Roll Conditions Powerful DirectiveForce Magnets for Fast Heading Lock-on Movable Sun Shield 45 Degree Lubber Lines High Temperature Construction for Extended Operating Range Custom Fitted Protective Covers Available (weather shield model no. WS-P) Easily Installed, Fits 5.25" (13.35 cm) Mounting Hole 100% Repairable Exclusive 5-Year Ritchie Warranty   Get it today before it's gone at  https://www.clrmarine.com/m4/10377--ritchie-dnp-200-navigator-compass-binnacle-mount.html

  Furuno Leads The Way To Enhanced Heading Accuracy With New Satellite Compass Offerings!     In 2001, Furuno introduced ground-breaking new Satellite Compass technology, using GPS satellites to provide a heading fix that rivaled traditional gyrocompass accuracy and repeatability. Since introducing this technology, Furuno satellite compasses have enabled many fleets to eliminate a gyro from their fitting list, saving many thousands of dollars in both equipment cost and wet-sphere gyro maintenance. Continuing our legacy of providing both quality and value, Furuno is very pleased to introduce a new series of Satellite Compasses to replace our revered SC50 and SC110 models.     Furuno's new SC70 (2-antenna) and SC130 (3-antenna) Satellite Compasses offer the stability and reliability of our previous offerings with a few new enhancements. The new SC-series compasses use a color LCD display that fits right in with our overall product family look and feel. In fact, the new SC displays are a cosmetic match with our BR500 BNWAS and FA170 AIS displays, so the vessel dash will look nicely uniform. Even more exciting is our new signal processing, which ensures these compass antennas have greatly reduced susceptibility to multi-path, or "signal bounce", making placement on a vessel mast and installation a breeze. The performance and feature set of the new SC compasses surpass the previous models, with enhanced motion compensation capability and more precise heading, even from the 2-sensor SC70!       Here are some key features and pricing for the SC70 & SC130:    - GPS/WAAS, Galileo and GLONASS position fixing and heading calculation  - Course accuracy 0.25° RMS (SC130), 0.4° RMS (SC70)  - Course and attitude resolution selectable to as fine as 0.001 degrees Rate-of-Turn (ROT) accuracy to .001 degree per second  - Pitch and roll accuracy 0.4° RMS 3  - Axis speed calculation (Bow/Stern/Longitudinal)  - Input/Output:           - NMEA/IEC61162-1/2: 10 Configurable Output & 5 Input Ports           - CAN Bus: 1 port (for connection to NMEA2000 devices)           - AD10: 4 output ports (for connection to legacy equipment)           - IEC61162-450 (Ethernet) network output on RJ45 port for INS and -450 compatible devices  - Type approved as primary or secondary THD (Transmitting Heading Device)* as well as GPS and Rate of Turn Indicator (ROTI)**    *depending on vessel size and Class **ROTI requires use of optional RD50  - 4.3" Color "Wide" WQVGA LCD display - Single cable connection between antenna and processor (supplied separately)     The SC70 and SC130 models include display, processor, antenna and common installation materials. Antenna cables are a required option and are supplied separately. Please visit the SC70 and SC130 product pages for additional antenna cable options. In addition to the antenna cable, options include LAN cables for connection to Ethernet devices or ship's network. An IF-NMEASC is necessary for analog output or optional IF-2503 for contact closure. Log pulse output is no longer supported.       Specials   Closeouts    Remanufactured    Rebates  

  Furuno Leads The Way To Enhanced Heading Accuracy With New Satellite Compass Offerings!     In 2001, Furuno introduced ground-breaking new Satellite Compass technology, using GPS satellites to provide a heading fix that rivaled traditional gyrocompass accuracy and repeatability. Since introducing this technology, Furuno satellite compasses have enabled many fleets to eliminate a gyro from their fitting list, saving many thousands of dollars in both equipment cost and wet-sphere gyro maintenance. Continuing our legacy of providing both quality and value, Furuno is very pleased to introduce a new series of Satellite Compasses to replace our revered SC50 and SC110 models.     Furuno's new SC70 (2-antenna) and SC130 (3-antenna) Satellite Compasses offer the stability and reliability of our previous offerings with a few new enhancements. The new SC-series compasses use a color LCD display that fits right in with our overall product family look and feel. In fact, the new SC displays are a cosmetic match with our BR500 BNWAS and FA170 AIS displays, so the vessel dash will look nicely uniform. Even more exciting is our new signal processing, which ensures these compass antennas have greatly reduced susceptibility to multi-path, or "signal bounce", making placement on a vessel mast and installation a breeze. The performance and feature set of the new SC compasses surpass the previous models, with enhanced motion compensation capability and more precise heading, even from the 2-sensor SC70!       Here are some key features and pricing for the SC70 & SC130:    - GPS/WAAS, Galileo and GLONASS position fixing and heading calculation  - Course accuracy 0.25° RMS (SC130), 0.4° RMS (SC70)  - Course and attitude resolution selectable to as fine as 0.001 degrees Rate-of-Turn (ROT) accuracy to .001 degree per second  - Pitch and roll accuracy 0.4° RMS 3  - Axis speed calculation (Bow/Stern/Longitudinal)  - Input/Output:           - NMEA/IEC61162-1/2: 10 Configurable Output & 5 Input Ports           - CAN Bus: 1 port (for connection to NMEA2000 devices)           - AD10: 4 output ports (for connection to legacy equipment)           - IEC61162-450 (Ethernet) network output on RJ45 port for INS and -450 compatible devices  - Type approved as primary or secondary THD (Transmitting Heading Device)* as well as GPS and Rate of Turn Indicator (ROTI)**    *depending on vessel size and Class **ROTI requires use of optional RD50  - 4.3" Color "Wide" WQVGA LCD display - Single cable connection between antenna and processor (supplied separately)     The SC70 and SC130 models include display, processor, antenna and common installation materials. Antenna cables are a required option and are supplied separately. Please visit the SC70 and SC130 product pages for additional antenna cable options. In addition to the antenna cable, options include LAN cables for connection to Ethernet devices or ship's network. An IF-NMEASC is necessary for analog output or optional IF-2503 for contact closure. Log pulse output is no longer supported.             Specials   Closeouts    Remanufactured    Rebates        

I3007 Rudder Display The Simrad I3007 Instrument Series offers a 7-inch superior color display with easy touch control, various graphic layouts, and the capability to enable up to eight different functions simultaneously. The I3007 is IMO approved as a Rudder Angle Indicator, Heading Repeater, Rate of Turn Indicator (I3007 only), Propeller Pitch Indicator, and Propeller Revolution Indicator, plus monitor other functions like Engine RPM, Wind Instruments, Digital Data Thruster Propeller Pitch Angle, and Boat Speed. Offering a flexible installation that supports various I/O signal types, the display is approved for SOLAS vessels. Features: Multiple instrument functions in one display Enable up to eight different functions Configurable for single or multi-purpose Switch easily between multiple functions Long distance viewing All common analog signal types supported Bridges data between NMEA 2000®, serial, and Ethernet for more flexible & advanced installation requirements 2 x NMEA 0183 ports with up to a 38000 baud rate Suitable for all vessel sizes Included: Power Cable 4-Pin B & G Zeus S Bracket Sun Cover for GO7 Bracket Mount GO7 XSR / Vulcan 7R Dash Mount Kit GO7 XSR/Vulcan 7R Beze The IS300 Series has the capability to enable the following simultaneously: Heading Repeater: IMO approved when paired with NMEA 2000, NMEA 0183, or LWE heading sensors, such as Simrad GPS and Gyro compasses Rudder Indicator: IMO approved when connected to an Autopilot System with the optional display of rudder demand. Reading rudder positions from all Simrad rudder feedbacks or is compatible with NMEA 0183 feedback from other third-party systems. Rate of Turn Indicator: 7” IMO approved and 5” non-IMO ROT Indicator with a configurable scale range and is compatible with Simrad GPS Compasses, HS60/70/80, Simrad Gyros GS80/85, and Simrad Magnetic Compasses Precision-9, RC-42 Propeller Pitch Indicator configurable for use with Propulsion and Thruster (Note: Transducer/sensor not offered by Navico) Propeller Shaft RPM: IMO compliant with a selectable Scale Range (Note: Transducer/sensor not offered by Navico) Engine RPM Indicator with a Selectable Scale Range from 200 up to 10,000 (Note: Transducer/sensor not offered by Navico) Wind Instrument: Measuring True Wind Speed and Angle, Apparent Wind Speed and Angle, Beaufort Wind Speed Indicator with Selectable Orientations (relative to North or the Ships’ Bow). Compatible with Simrad and B & G Sensors or any NMEA 2000 or NMEA 0183 Wind Sensors. Digital Data: Data layout for display or a multitude of data types; Vessel, Environmental, Navigation, Engine, Depth, Speed, Heave, Pitch, Roll, Time & Date *Digital data types can only be selected from the available installed transducers and sensors

BARIGO: Design as a Key to Success Welcome to the World of BARIGO Precision Instruments.   Weather stations, barometers, thermometers, hygrometers, altimeters and compasses are BARIGO's strength.  Today, products need to be more than just functional. They have to be user-friendly, but most of all of have a pleasing and appealing design. BARIGO's design awareness is reflected throughout their range of products. The numerous design awards are living proof that BARIGO is on the right track.   BARIGO: Makes the Difference   BARIGO Instruments Stand for the Finest in Form & Function.   BARIGO has become the wide choice of marine instruments for demanding boat and yacht owners.  Whether traditional brass or cool chrome, whether mechanical or with modern electronics: each single instrument, whether hygrometer, barometer, thermometer or ship's bell clock is made in traditional Black Forest watchmaker quality.      Specials     Rebates    Close Outs     Remanufactured

SC70 Satellite Compass w/o Cable The SC70 is the latest satellite compass built on FURUNO’s commercial-grade technology platform. These satellite compasses prove their value by increasing the accuracy of other devices, such as Radar, ARPA, Scanning Sonar, Current Indicator, Chart Plotter, ECDIS and Autopilots. They provide a highly accurate heading input to these other technologies by utilizing the very latest GNSS (Global Navigation Satellite System). This satellite system is comprised of GPS, Galileo and GLONASS to ensure the highest precision and a continuous coverage. The SC70 provides a variety of data, including GPS Positioning, SOG (Speed Over Ground), COG (Course Over Ground), ROT (Rate Of Turn) and 3-axis speed (bow, stern and longitudinal). All of these data assist with critical maneuvers, such as berthing. The compasses is maintenance free - a great asset for any vessel. Consists Of: SC701 - Junction box for SC70/SC130 SC702 - Display unit for SC70/SC130 SC703 - ANT 2GPS/ANG/ACCEL/MGNT SNSR Note: The SC70 and SC130 are sold without an antenna cable. Standard Features: Provides highly accurate heading data of 0.4° for autopilot, Radar, ARPA, Scanning Sonar, Current Indicator, Chart Plotter, ECDIS and Autopilots Ideal for small to medium boats requiring highly accurate heading Utilizes GNSS such as GPS, Galileo and GLONASS for high Precision SBAS compatible (EGNOS,WAAS,MSAS) Provide precise data for SOG, COG, ROT and L/L Eliminating the problem of not having enough satellites at hand by using multiple types of satellites Speed on 3 axis (bow, stern and longitudinal) for safe navigating and berthing IMO Type-approved as THD, GPS and ROTI. Complying with the IEC, ISO requirements Easily integrated into the existing shipboard network via Ethernet Rapid follow-up rate 40°/s (twice the IMO high speed craft requirement, 20°/s) Maintenance free and no recurring cost as there are no mechanical parts Super short starting time - 90 seconds Once the power is on, it takes about 90 seconds to start (the starting time will slightly differ depending on the equipment location) Easy to retrofit by using existing antenna cabling for SC-50/55/60/110/120. (The LAN_CNV option kit is necessary) Precision pitch/roll data in Analog and Digital formats for vessel stabilization, Sonar, etc. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

AS GPS HS Precision GPS Antenna w/Heading Sensor The AS GPS HS is a precision GPS receiver with heading sensor provides fast position fixes with an accuracy within 2.5 meters. An internal compass also provides constant boat heading displayed on your Humminbird chart screen, even while sitting still. This heading sensor makes it easy to understand your boat’s direction in correlation to the GPS chart for precision boat control. Compatible with the following models: all SOLIX (with AS GPS NMEA adapter), all HELIX 12, all HELIX 10, all HELIX 9, all HELIX 8, all HELIX 7 G2N & G3N, all MEGA 360 Imaging models, all 360 Imaging models, all ONIX Series*, 859ci HD Combo, 859ci HD DI Combo, 859ci HD XD Combo, 899ci HD SI Combo, 959ci HD Combo, 959ci HD DI Combo, 959ci HD XD Combo, 999ci HD SI Combo, 1159ci HD Combo, 1159ci HD DI Combo, 1159ci HD XD Combo, 1199ci HD SI Combo Receiver dimensions:  3.25" diameter, 1.5" high and comes with 20' cable and has a 1"-14 thread count stem mountable with an optional antenna stem (antenna stem not included).   This receiver requires software 6.570 or higher in the compatible Humminbird product.  Note:  SOLIX and ONIX Series require purchase of AS GPS NMEA cable for connection. APEX requires the AS GPS adapter When used with 360 Imaging, provides the ability to mark accurate waypoints anywhere on the screen. Note: this GPS receiver WILL NOT work with InterLink. 1-Year Limited Warranty WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Navico Navico is the leader in marine electronics and is currently the world's largest marine electronics company, and is the parent company to leading marine electronics brands Lowrance, Simrad and B G. Navico has approximately 1,500 employees globally and distribution in more than 100 countries. Navico partners with a talented, global supplier network to deliver quality products to its customers.

Hand Bearing Compasses Using these precision marine hand bearing compasses, you can easily obtain quick magnetic bearings on shore or floating objects. Obtain a bearing simply by aligning front and rear sights on an object and reading off bearing. Uses include quick bearing or position set, determination of angular gain or loss on the competition while racing, checking distance offshore, establishing lee-bow set while cruising or racing in currents, drift vectoring and plotting a line of position. Compass features a liquid-damped compass card graduated in 5° segments and a large, contoured handle. Lanyard and instructions included. The illuminated compass sports a solid-state LED with a positive push-on switch.