|
CVS-126 with Transom Mount Triducer
CVS-126 Dual Frequency Color LCD Echo Sounder
The SI-TEX CVS-126 Dual-Frequency (50/200kHz) Echo Sounder features a digital signal processor (DSP) for a clearer image that enhances fish targets in shallow and deep depths, plus auto function for the most reliable setting and best performance.
Features:
Digital 5.7" Dual-Frequency Color LCD Fishfinder
DSP technology for a clearer detailed image that enhances fish targets
Digital signal processing
State-of the-art digital signal processor offers advanced filtering capabilities
Digital Filtering feature eliminates clutter by filtering out the noise to provide a clear detailed image that enhances fish targets in shallow and deep depths
Making it easy to differentiate between baitfish, larger fish, schools of fish and the sea floor
Sona-Tone
Exclusive Sona-Tone identifies what's under your boat with different sounds for fish and schools of fish. So you will not miss any good opportunites even if you are away from the CVS-126
Automatic Functions
For best performance the Auto Function mode chooses the most reliable setting for such functions as Gain, Range and Shift
Optimum settings are continuously selected automatically (GAIN, RANGE, SHIFT)
Fishing Hot Spots
Leads you back to your favorite fishing hot spots or other previously saved positioning in memory with input from optional GPS sensor
Store the Image
YouStores up to 10 screen images in built-in memory for recalling later by "one-touch"
Great for recalling a potential hot spot for review later
Easy Operation
Easy access to all system functions with simply arranged keypad, dedicated-functions keys, rotary-knob control of Gain/Selection and comprehensive on-screen menus
Sunlight Viewable
Brilliant 5.7" color LCD display with 8, 16, or 64 color levels and an anti-reflective coating for excellent readability in direct sunlight
Transom Mount Triducer 250/50/200ST-CX
Transom Mount Triducer included for the CVS-126 Dual Frequency Color Echo Sounder.
|
813.96 |
|
|
HDI SSkimmer Low/High 50/200/455/800kHz Transom Mount 9-Pin Transducer
9-Pin Transom Mount Transducer
HDI Skimmer transducer 50/200/455/800kHz with built in temp. Includes mounting bracket and hardware. Cable Length 6M (20')
Hybrid Dual Imaging (HDI) transducer (50/200/455/800) - The power of two award-winning technologies -- Broadband Sounder PLUS Exclusive DownScan Imaging-- combined to provide the best-possible view beneath your boat.
|
227.74 |
|
|
Transom Mount Transducer for StructureScan 3D
Includes transducer, transom mounting bracket and assembly and mounting screws, washers and nuts.
|
452.20 |
|
|
TM260 1kW Transom Mount Transducer w/Humminbird #9 Plug - 7-Pin
Powerful, Yet Sensitive! The TM260 takes the legendary performance of the B260 to your vessel's transom. This top-of-the-line, broadband, transom-mount brings crystal clear imaging to any of today's fishfinders. The large, 200 kHz element and the seven-element, 50 kHz array are excellent for bait and game fish separation along with detecting ground fish holding tight to the bottom. The TM260's rugged mounting bracket is easy-to-install and has a streamlined shape that delivers high-speed performance up to 30 knots (35 MPH).
Features:
Top-of-the-line narrow-beam transom-mount
Designed for bottom fishing
Wide 19° beam at 50 kHz
Narrow 6° beam at 200 kHz
Interfaces to any 600W or 1 kW sounder
Depth and fast-response water-temperature sensor
Kick-up assembly locks in the "up" position and will not damage the transom
Accommodates transom angles between 3° and 21°
Urethane housing
Boat Size: Up to 12M (40')
Specifications:
Weight: 4 kg (8.9 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1185.34 |
|
|
TM260 1kW Transom Mount Transducer w/Humminbird 14-Pin Plug
Powerful, Yet Sensitive! The TM260 takes the legendary performance of the B260 to your vessel's transom. This top-of-the-line, broadband, transom-mount brings crystal clear imaging to any of today's fishfinders. The large, 200 kHz element and the seven-element, 50 kHz array are excellent for bait and game fish separation along with detecting ground fish holding tight to the bottom. The TM260's rugged mounting bracket is easy-to-install and has a streamlined shape that delivers high-speed performance up to 30 knots (35 MPH).
Features:
Top-of-the-line narrow-beam transom-mount
Designed for bottom fishing
Wide 19° beam at 50 kHz
Narrow 6° beam at 200 kHz
Interfaces to any 600W or 1 kW sounder
Depth and fast-response water-temperature sensor
Kick-up assembly locks in the "up" position and will not damage the transom
Accommodates transom angles between 3° and 21°
Urethane housing
Boat Size: Up to 12M (40')
Specifications:
Weight: 4 kg (8.9 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1185.34 |
|
|
xSonic P66 Plastic Transom Mount Transducer 50/200kHz with Black 9-Pin Connector
P66 Transom Mount Depth/Temp Transducer
The P66 features a 50/200 kHz, dual-frequency, single-ceramic element. This hydrodynamic housing with a rounded nose reduces the turbulence under the transducer's face for clear display images.
|
157.40 |
|
|
Bike Speed Sensor 2 & Cadence Sensor 2 Bundle
Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes.
The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge® cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit.
The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training.
Send live speed, distance and cadence data to compatible training apps or displays by using ANT+® connectivity and BLUETOOTH® Low Energy technology.
With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
67.19 |
|
|
Cruise/Hook2 83/200 Skimmer Transom Mount Transducer with 19.5 cable.
Features:
83/200
Skimmer
Transom Mount
Specifically for Cruise Series and Hook2 Series
|
53.71 |
|
|
TM165HW Chirp High Wide 600W Transom Mount Transducer - Requires Adapter Cable
Replacing a non-Chirp or single frequency transducer with the AIRMAR TM165HW (High Wide) 600W Chirp-ready transom mount transducer provides anglers with an inexpensive and easy performance upgrade to their current sonar systems. The TM165HW is legendary for producing the finest detail and largest coverage area of any transom mounted model in its class.
The TM165HW is perfect for fishing boats up to 25 feet (8 meters) and recommended for planing hulls made from fiberglass, metal or wood - both outboard and IO.
TM165HW delivers large, crisp return images on the display with a noise-free, clear picture of the action below. Better coverage from top to bottom with stronger, well-defined fish targets.
Super Wide 30° Average Beamwidth Achieves 3x the Coverage Under the Boat as Compared to Standard High Frequency Chirp-ready Transducers (eg, the popular B75H)
The TM165HW is compatible with the following sonar brands and models:
Lowrance: All models compatible except Hook series
Humminbird: SM300; Helix and Solix can be set manually
Garmin: GPSMAP 7600, 8600, 7X2/9X2/10x2/12x2, GSD26
Raymarine: compatible with all models
Simrad: compatible with all models
Features:
Depth and fast-response water-temperature sensor
Requires Mix and Match cable
600 W with a maximum depth of 152 m (500')
High Frequency: 150 kHz to 250 kHz for superior shallow water performance, bottom detail and fish target separation
High-wide beamwidth provides more coverage under the boat for detecting fish in the upper water column
Super wide 30° average beamwidth for superior coverage under the boat and maximum detection area
High-performance, low-profile design provides excellent resolution at speed when installed properly
Exclusive Xducer ID® technology
The TM165HW is an AIRMAR Mix and Match transducer. 600W Mix and Match transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
421.02 |
|
|
TM265C-LM-12F Transom Mount Transducer with 12-Pin Connector for Furuno TZT12F, TZT16F & TZT19F
Rely on Airmar's broadband transducers for the ultimate fishing mission! Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town. Traditional marine fishfinders operate at discreet frequencies such as 50 kHz and 200 kHz, use relatively short-duration pulses, and use narrowband sonar transducers. In contrast, CHIRP uses a precise sweep pattern of many frequencies within a long-duration transmits pulse from a broadband transducer, so the equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine fishfinder.
Specifically designed for smaller boats (25'-40'), the TM265C-LM CHIRPS across the following bandwidths:
Low & Medium-Frequency (LM)
Low—Chirps from 42 kHz to 65 kHz, 25° to 16° beamwidth
Medium—Chirps from 85 kHz to 135 kHz, 16° to 11° beamwidth
Medium-frequency benefits include the ability to sound deeper than the high-frequency, along with better target resolution than the low-frequency
Features:
8-Internal, Broadband Ceramic Elements
Depth & fast-response water-temperature sensor
Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)
Operating frequencies:
Low—Chirps from 42 kHz to 65 kHz
Medium—Chirps from 85 kHz to 135 kHz
Beamwidth (Adjustable):
Low—25° to 16°
Medium—24° to 16°
10 m (33’) cable
The depth and fast-response water-temperature sensor
12 Pin Connector for use with Furuno TZT12F and TZT16F Displays
Urethane transducer housing and stainless steel mounting bracket
Boat Size: 8 m to 12 m (25’ to 40’)
Hull Type: Fiberglass, wood, or metal
Exclusive Transducer ID
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1852.50 |
|
|
Transom mount Triducer multisensor for speed, depth and temperature information.The hydrodynamic housing features a rounded nose which reduces the turbulance under the transducer's face for accurate high speed readings.
Features:
New square blade paddle-wheel improves linearity and is more accurate through the speed range
With adjustable tension bracket which kicks up on impact to protect the housing
Recessed waterflow channel protects paddle-wheel
|
234.98 |
|
|
GT51M-TM Transom Mount DownVü/SideVü 500W (CHIRP 260/455 kHz) Traditional 600W Mid-Band CHIRP 80-160 kHz Transducer with Temp - 12-Pin
The GT51M-TM transom mount transducer provides ultra-clear sonar pictures of objects, structure and fish that pass below your boat. This traditional CHIRP and CHIRP DownVü/SideVü transducer is optimized for depth performance and rough condidtions.
The CHIRP DownVü/SideVü elements have a power rating of 500W per element (1,500W total) and operating frequencies of 260/455 kHz. The traditional CHIRP sonar has a power rating of 600W and operating frequencies of mid-band CHIRP 80-160 kHz. It also includes a built-in fast response temperature sensor.
GT51M-TM includes a 12-pin transducer with mounting hardware and installation instructions. Follow the instructions carefully to avoid damaging your boat.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
566.99 |
|
|
XNT-9-HW-T HELIX® Dual Spectrum CHIRP Transom Mount Transducer with Temp
Transom Mount Dual Spectrum CHIRP Transducer supports Dual Spectrum CHIRP 2D Sonar with high frequency beam and wide cone angle, offering CHIRP range of 150-220kHz and max depth of 1200ft. Includes built-in temperature sensor, rugged composite design, impact-release mounting bracket and 20' cable.
Features:
This accessory is compatible with the following Humminbird products: HELIX 5 CHIRP G2 – GPS-equipped models only, HELIX 7 CHIRP G2/G3 – GPS-equipped and CHIRP DI G2 models, HELIX 7 CHIRP G2N/G3N – All models, HELIX 8 CHIRP G3N – All models, HELIX 9 CHIRP G2N/G3N – All models, HELIX 10 CHIRP G2N/G3N – All models, HELIX 12 CHIRP G2N/G3N – All models, ICE HELIX CHIRP G2 – All models (in Open Water Mode) Side Imaging™ and Down Imaging™ units can support the XNT 9 HW T as a 2D sonar only transducer.
This transducer does not support Side Imaging™ or Down Imaging™.
Dual Spectrum CHIRP: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz
Dual Spectrum CHIRP- Max Depth: 1200ft (365m)
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
85.70 |
|
|
SS3D SSHD & TotalScan Skimmer Transom Mount Bracket
Structure Scan 3D gives freshwater and saltwater anglers a unique, three-dimensional view of fish, structure and bottom contours - making it easier to understand where fish and structure are located in relation to your boat. With Structure Scan 3D, anglers spend less time searching for productive water and more time catching fish. Structure Scan 3D requires a 3D module with transducer and a HDS Carbon or HDS Gen3 fish finder/chart plotter display.
Features:
Bracket for 3D and TotalScan Transducers
Fits select 3D Structure Scan and TotalScan models
Used with Lowrance or Simrad products
|
50.96 |
|
|
TM275C-LHW 1kW Chirp Transom Mount Transducer
Get more coverage under your boat with Airmar’s unique wide beam, high frequency Chirp-ready transducers. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band results in superior resolution. The constant wide beamwidth provides twice the coverage under the boat and excellent fish arches on the display compared to most high frequency narrow beam transducer options.
The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential down to 500'.
The low frequency band and 1 kW of power also provides great deeper water performance. Get the best of both worlds with Airmar’s dual frequency Chirp-ready transducers with wide beam coverage.
Features:
Depth and fast-response water-temperature sensor
1 kW for great deep water performance from the low frequency
Low Frequency: 42 kHz to 65 kHz with maximum depth of 914 m (3000') 25° to 16° beamwidth
High Frequency: 150 kHz to 250 kHz with maximum depth of 152 m (500') 25° constant beamwidth
123 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth
High frequency provides superior shallow water performance, bottom detail and fish target separation
High wide beamwidth provides more coverage under the boat for detecting fish in the upper water column
Transom-mount transducer with stainless steel mounting bracket
Recommended boat size: up to 10 m (32')
Hull Type: Fiberglass, wood, aluminum or steel
Exclusive Xducer ID® technology
Mix and Match Cable Required
Specifications:
Weight: 4 kg (8.9 lb)
Transom Angles: 3° to 21°
Acoustic Window: Urethane
Urethane transducer housing with stainless steel bracket
Eight internal broadband ceramic assemblies
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1781.26 |
|