|
Rod Holder Gimbal Mount Fillet Table - 30"
Features:
Solid one-piece construction for long life and easy maintenance
Easily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storage
UV stabilized high-density polypropylene construction
Large, 30" by 12-5/8" deep with towel bar.
UV stabilized, high-density polypropylene
Assembles in minutes, with all assembly hardware included
Easily accessible knife and pliers holders, large has hose holder and towel bar
Knives and pliers not included
|
155.89 |
|
|
Rod Holder Gimbal Mount Fillet Table - 20"
Features:
Solid one-piece construction for long life and easy maintenance
Easily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storage
UV stabilized high-density polypropylene construction
Medium, 20" wide by 12-5/8" deep,
UV stabilized, high-density polypropylene
Assembles in minutes, with all assembly hardware included
Easily accessible knife and pliers holders
Knives and pliers not included
|
135.61 |
|
|
RAM-ROD® 2007 Fishing Rod Holder with Track Ball™ Base
The RAM-ROD® 2007 rod holder is one of the most popular rod holders for the kayak angler due to its simplicity and adjustability. Utilizing the unique ball and socket technology, you can rotate and adjust the rod holder almost infinitely making this rod holder ideal for kayak fishing. This kit includes a Track Ball™ for connecting to virtually any track system including the RAM Tough-Track™.
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
Part number reflects product packaged in a poly bag
|
23.53 |
|
|
Tough-Tube™ Rod Holder with Track Base
The Tough-Tube™ Rod Holder with Track Base kit is compatible with the RAM Tough-Track™ to provide an ideal fishing rod holder mounting solution. Attach the rod holder using the included track base and RAM ROD® ratchet attachment. The track base’s tether point secures your rod holder while the adjustable ratchet attachment allows for multiple angles, keeping you in control out on the water.
Features:
1. Quick release and installation
2. High strength materials ensure product longevity
3. Compatible with spinning reels and level wind reels
4. Ratchet system allows for multiple articulation points
5. Lanyard tie points for extra security
6. Custom designed for heavy chop environments
7. Mount virtually anywhere on heavy rigged kayaks without hinderance
8. Lifetime warranty
9. Made in U.S.A.
Dimensions:
Inner diameter: 1.9"
Inner tube length: 10" (from bottom to top of lip)
Post Spline Length: 3"
Material:
High Strength Composite
Notes:
Part number reflects product packaged in retail bag for store shelf display.
Weight:
1.05 lbs.
|
22.42 |
|
|
423 Downrigger Rod Holder Adapter
Turn your downrigger mount into a rod holder mount with Scotty's 423 Downrigger Rod Holder Adapter. In combination with a 241 or 241L Mount, easily place the adapter on top of your 1023 Tilt-Up Mounting Bracket, and select your favourite rod holder and you're ready to go. Built to last with rugged engineering grade nylon.
*241L Combination Side/Deck Mount, 1023 Tilt-Up Mounting Bracket, 1026 Swivel Mount and 400 Orca Rod Holder not included.
|
13.30 |
|
|
Fillet Table Rod Holder Gimbal Mount
Gimbaled Rod Holder Mounting Accessory works on all of our fillet tables (326510-3, 326515-3, 326580-3, and 326585-3) and comes complete with hardware to mount to the table. Great for mounting a variety of accessories.
|
86.35 |
|
|
Mounting Plate for 325190 Rod Holder
Mounting Plate only for the 325190 30° removable rod holder.
|
17.21 |
|
|
RAM-ROD® 2007 Fly Rod Jr. Fishing Rod Holder with Track Ball™ Base
The RAM-ROD® 2007 Fly Rod Jr. holder is one of the most popular rod holders for the kayak angler due to its simplicity and adjust-ability. Utilizing the unique ball and socket technology, you can rotate and adjust the rod holder almost infinitely making this rod holder ideal for kayak fishing. This rod holder is designed for use with fly rods and reels. Includes a Track Ball™ for connecting to virtually any track system including the RAM Tough-Track™.
Specs & Features
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
Part number reflects product packaged in a poly bag.
|
24.07 |
|
|
NEW - Innovative Trolling System Puts You In Control
No matter how you fish - or what your fish for - you can customize our new trolling system to fit your style. Our new rod holders feature a pistol grip design for one-handed adjustment of the rod angle and a ratcheting system for easy rod removal. Made of High-strength aluminum to withstand the punishment of big water use and can be changed out in a snap with our unique track system.
Adjustable Rod Holder
Single Axis
This 10" holder utilizes 6 up and down locking positions, and delivers 90° of side-to-side rotation. A pistol grip release allows for quick, one-handed angle changes, and the innovative ratcheting adjustment system allows you to quickly pull the holder to a vertical position. Includes a UV-resistant end cap to protect rod and reel.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
88.24 |
|
|
Aluminum Clamp-on Rod Holders
Model: RA5004SL
Color: Silver
Fits: 1.900" O.D. Pipe
Mount: Vertial
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
148.08 |
|
|
Aluminum Clamp-on Rod Holders
Model: RA5005SL
Color: Silver
Fits: 2.375" O.D. Pipe
Mount: Vertial
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
148.08 |
|
|
Aluminum Clamp-on Rod Holders
Model: RA5201GL
Color: Gold
Fits: 1.050" O.D. Pipe
Mount: Horizontal
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
165.38 |
|
|
Aluminum Clamp-on Rod Holders
Model: RA5202SL
Color: Silver
Fits: 1.315" O.D. Pipe
Mount: Horizontal
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
148.08 |
|
|
Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.660 O.D. Pipe
Color: Black
Pipe Size: #3
Fits: 1.660" O.D. Pipe
Mount: Vertical
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
115.38 |
|
|
Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe
Color:Black
Pipe Size:#1
Fits:1.050" O.D. Pipe
Mount:Horizontal
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.
These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
115.38 |
|