Contura Single Switch Mounting Bracket One end section. Modular design permits assembly in groups - can be used with part number 1001702. Features: Used with Rocker Switches and Contoura Switches Same as Cole Hersee part number 82159-1 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Series 20 Ball Bearing Block - Single, Loop Mount Features: Low friction High static and dynamic load capacity Lightweight Single point mounting Precision molded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high performance & low friction. Applications: Dinghy control lines Dinghy vangs Cunninghams Traveller controls Materials: Stainless steel ball bearings UV stabilized Acetal sheave Grade 316 stainless steel load strap and head fitting Impact and UV resistant, fiber reinforced Nylon cheeks

621 Series 120A Kit with MC-618 Regulator, T-Sensor, K6 Pulley, Single Foot & Mounting Hardware Kit Includes:  621-120-K6 Alternator MC-618 Regulator Temperature Sensors Mounting Hardware 621-120-K6 Alternator: 120A, 12V, Spindle Mount (Single Foot), 1-2in, K6 Serpentine Pulley, Isolated Ground 1" Motorola-Style Mounting;  Typical for Westerbeke, Lehman, Hino & Pathfinder Engines 2" Delco-Style Mounting;  Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based Engines This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Adjustable Grill Rod Holder Mount The Kuuma Pivoting Rod Holder Mount fits securely into any 1-5/8" I.D., flush mount fishing rod holder and instantly converts it to a fully adjustable grill mount.  The stainless inner tube telescopes out of the anodized aluminum outer tube making the overall height adjustable from 14.8" to 18.8".  The mounting plate is compatible with all Kuuma grills, as well as most rectangle-style Magma grills (Magma and Kuuma grill mounting hardware included).  The mounting plate swivels around a ball joint, making it freely adjustable to whichever angle best suits your grilling needs.  Both the telescoping tube and swiveling mounting plate feature a tension clamp, keeping the Rod Holder Mount securely locked in the position you choose.  Compatible With: All Kuuma grills Features: Fits into 1-5/8" I.D. fishing rod holders of all angles to create a level grill mount Mounting plate pivots and rotates 360-degrees around ball joint  Stainless Steel inner tube telescopes out 4-inches Tension clamps securely locks the pivoting and telescoping joint Rugged reinforced nylon, anodized aluminum and Stainless Steel construction *Sold as an Indivudual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Inboard/Outboard Rail Mount The Kuuma Grill Rail Mount is ideal for using your Kuuma grill aboard your boat by mounting it on any cockpit rail.  This mount allows your grill to hang outside the rail to protect fiberglass from spills and splatters. Compatible With: Any Kuuma grill Features: Can be used on 7/8" - 1-1/4" round horizontal railings or on 1-1/4" square railings All installation hardware included Made of rust-resistant anodized aluminum Dimensions (L x W x H) - 9" x 2" x 2.5" *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Pedestal Grill Mount  Kuuma's Pedestal Grill Mount allows you to mount your grill to stationary locations, such as a dock, deck, swim platform or patio.  Can be mounted to most surfaces using the hardware of your choice.  The grill mount features a quick-release base for portability. Mount measures 30-inches tall with a 200 lb. load capacity. Compatible With: *All Kuuma grills  Features: Can be mounted to most surfaces Quick-release base for portability Technical Specifications: Material - Aluminum Height - 30" Weight Capacity - 200 lb In the Box: Pedestal Base ring Mounting hardware *Sold as an Individual  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Pontoon Rail Adapter Mount Rail Mount Adapter is designed to adapt wrap around style rail mounts to square pontoon railing with full height paneling.  The adapter saddles the top rail and securely clamps in place with the included Allen key.  It stays in place without any drilling or permanent installation damage.  The Grill Mount Adapter is made of durable stainless steel and aluminum that resists rust and corrosion.  Features: Use in addition to wrap-around style grill mount to mount grill on a pontoons' full height paneling No need to drill holes into fence panel or railing Easily adjusts from 1.4" to .75" with included Allen key Stainless steel and aluminum construction is rust-resistant Heavy-duty and durable *Sold as an Individual  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rail Mount For mounting our single axis rod holder, this convenient rail mount attaches to either round or square rails. For 3/4" to 1-1/4"

Dashboard Mount with Backing Plate for 7"-8" Tablets with Cases The RAM® Tab-Tite™ bundle is a rugged mount including the RAM® Tab-Tite™, RAM® Universal Double Ball Mount with Two Round Plates, and RAM® Backing Plate Adapter. The RAM® Tab-Tite™ spring-loaded, quick-release holder offers a secure fit with easy access to the mounted tablet. The spring-loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. The RAM-101U-B consists of a short double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allow for almost infinite adjustment and perfect viewing angles. The included 2.10" x 2.60" steel backing plate with #8-32 threaded holes attaches to a variety of RAM® Mounts ball bases. Features: The spring-loaded holder secures 7 in. -8 in. tablets with a case; interchangeable end cups allow you to modify the holder when upgrading devices Drill-down mounting solution; choose either round plate featuring the AMPS hole pattern for attachment to compatible device holders 2.10 in. x 2.60 in. steel backing plate attaches to a variety of RAM® Mounts ball bases Ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Holder Dimensions (inch): Height Range: 8.32" - 10.92", Width Range: 4.43" - 5.3", Depth Range: .13" - .62" Socket to Socket Length (inch): 2.5” Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Ball Size (inch): C size (1.5”) Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs. Materials: Marine-grade aluminum, high-strength composite, powder-coated steel Weight: 1.98 lb. Compatible Devices: Samsung: Galaxy Tab 4 8.0 with Otterbox Defender Case, Galaxy Tab A 8.0 (2017) with Case, Galaxy Tab A 8.0 (2018) with Case, Galaxy Tab A 8.0 (2019) with Case, Galaxy Tab S 8.4 with Otterbox Defender Case, Galaxy Tab E 8.0 with Verizon Rugged Case, and Galaxy Tab Active2

Universal 24" Radar Mast Platform Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast. Adjustable Designed with fore and aft adjustable rails so that you can have the radar as close as possible to the mast. Incredible Strength The solid under body construction not only greatly improves strength but also hides radar cables. On certain models. Accessories Pre-drilled under body allows for flood lights or horns to be mounted on certain models. Compatible Manufacturers: Furuno Garmin JRC Koden KVH Raymarine Simrad Sitex

Universal Kayak Roof Mount Attwood's Universal Kayak Roof Rack Mount fits existing roof racks. Popular "J" style rack. Safely secures your kayak to the top of your cars roof rack. Includes two straps for securing purposes. "J" style rack Universal - fits existing roof racks Roof rack type carrier

Universal Quick Release Top Plate MotorGuide's Universal Quick Release Top Plate gives you flexibility to quickly and easily switch between trolling motors. Easily switch between motors as your fishing style changes For use with the MotorGuide Universal Quick Release Mounting Bracket WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Hard Hat Light Mounts  The Princeton Tec Universal Hardhat Light Mounts are designed to firmly attach a flashlight to most hard hats.   This mount comes with provisions to snap into a front brim, or clamp onto a full brim model.  Hard Hat Light Mounts are compatible with most Princeton Tec handheld lights. Features: Water Resistant - IPX7 Color - Black ∗Includes both mounts *Sold as an Individual  WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAM Universal No-Drill RAM POD III Vehicle Mount with Double Socket Arm & 2/2.5" Round Bases (AMPs Hole Pattern) The RAM-316-3-202U consists of the RAM POD III No-Drill vehicle base, three rigid aluminum rod legs, double socket arm and two 2.5" round bases that contain the universal AMPs hole pattern. The base of the mount connects to your seat rail without any drilling necessary. The rigid aluminum rod legs can be bent to position your device to its optimum viewing location. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The universal AMPs hole pattern found on the round base adapter will connect to many RAM cradles. Leg Lengths: 18", 20" and 30" Installation Instructions: At right angles to the base of two legs are feet with mounting holes. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the rigid aluminum rod legs. The third leg on the RAM POD III should also be adjusted to help support the mount. The rigid aluminum rod arms will hold everything you need safely and securely. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Universal No-Drill RAM POD III Vehicle Mount with Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern) The RAM-316-3-2461U consists of the RAM POD III No-Drill vehicle base, 3 rigid aluminum rod legs, double socket arm, 2.5" round base that contain the universal AMPs hole pattern and 3.625" square base that contains the VESA hole pattern. The base of the mount connects to your seat rail without any drilling necessary. The rigid aluminum rod legs can be bent to position your device to its optimum viewing location. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge. Leg Lengths: 18", 20" and 30" Installation Instructions: At right angles to the base of two legs are feet with mounting holes. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the rigid aluminum rod legs. The third leg on the RAM POD III should also be adjusted to help support the mount. The rigid aluminum rod arms will hold everything you need safely and securely. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.