Baitcaster/Spinning Rod Holder without Mount Holds a bait caster reel in a cushioned cradle. A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side-mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in a holder with a soft latching strap that snaps over the top. *Comes with no mount, enabling you to choose whichever mount suits your needs separately.

Heavy Duty Pro Series Rod Holders The Pro Series line of molded rod holders takes the Pro Series to the next level with the addition of the Combo Mount. All the Pro-Series unique features you've come to expect, with the ability to mount in multiple configurations. Designed for use with casting and spinning rod holders. Heavy-duty, deep-tooth gear lock securely holds rod holder in mounting base. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

289 R-5 Universal Rod Holder without Mount The R-5 Rod Holder has been designed to securely hold your spincaster, spinning, bait caster, level wind and/or fly rod with up to 15lb test.   The 1/4" Stainless Steel lock bar pivots open to allow a quick effortless release of your rod. *Mount sold separately Features: Easy adjustable lock bar tension Designed and built to withstand all conditions and backed by the Scotty name In the Box: 290 R-5 Rod Holder *Sold as an Individual

DUAL AXIS ADJUSTABLE ROD HOLDERS DOWNRIGGER MOUNT Mount our dual axis rod holders between the mounting base and swivel base of your Cannon downrigger for unparalleled rod positioning. A pistol grip release allows for quick, one-handed angle changes, and the innovative ratcheting adjustment system allows you to easily pull the holder to a vertical position. Full 360 degree rotation makes it the ultimate fishing accessory. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Allows rod holder to mount into the gunnel of the boat. Alignment key allows for 360 degree pivot while holding rod holder securely in place. Includes water-tight cap.

Rail Mount For mounting our single axis rod holder, this convenient rail mount attaches to either round or square rails. For 3/4" to 1-1/4"

Thru-Bolt Mount Rod Holder Features: White UV-Stabilized Polyethylene Front Access Hole Pre Drilled Mounting Holes Stainless Hardware Not Included

Stainless Steel Side Mount Rod Holder  Side Mount Rod Holders and mounting brackets are constructed of formed 316 stainless steel with plastic end cap. Accommodates rods up to 1-5/8” in diameter. Installs with four #8 RH fasteners (not included).

No. 1106 The most popular Scotty Electric Downrigger, with a boom that telescopes for extra reach and collapses for storage. Makes for a great “big boat” downrigger. PRODUCT OVERVIEW:  Fully adjustable decent speed, lifts 7 lb. weights at 235 ft./min. and 15 lb. weights at 203 ft./min. Spray protected positive-drive depth counter and Kevlar drive belt by Optibelt™ 250 ft. of 150 lb. Test, Stainless Steel Downrigger Cable Boom mounted adjustable 358 Rodmaster II Rod Holder Includes Scotty/Marinco™ Plug and Receptacle The lowest amperage draw of any downrigger made with less than 1/3 the battery draw than some of the competition Marine grade stainless steel boom Multi-position auto-stop included (Use 1008 Stopper Beads to stop at any pre-set position) Includes Power Grip Plus Line Release Includes 1023 Tilt-up Mounting Bracket which enables the unit to be tilted and locked in the upright position Includes 1026 Swivel Pedestal Mount with 16 available positions Fully assembled and factory tested with complete saltwater protection Downrigger Boom Length: 36″-60″ telescoping stainless steel boom Downrigger Boom Diameter: 1 1/4″ Rod Holder Interior Diameter: 1.85″ WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Side Mount Removable Rod Holder  Side Mount Rod Holder slides in and out of mounting plate for a lower profile while not in use. Constructed of formed 316 stainless steel with mounting plate. Features a 30° angle. Accommodates rods up to 1-13/16”. Installs with four #10 FH fasteners (not included).

SINGLE Rod Holder Downrigger-mounted rodholder features dual axis adjustability. Fits all 2011 Cannon electric downriggers. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Side Mount 4 Rod Holder Side Mount Rod Savers are for vertical or horizontal applications.  They are designed to hold rods and reels in a crisscross manner to enable more rods to be stored in a smaller space. Holds up to 2-4 Rods 

Side Mount 6 Rod Holder Side Mount Rod Savers are for vertical or horizontal applications. They are designed to hold rods and reels in a crisscross manner to enable more rods to be stored in a smaller space. Holds up to 4-6 Rods. 

Side Mount 8 Rod Holder Side Mount Rod Savers are for vertical or horizontal applications.  They are designed to hold rods and reels in a crisscross manner to enable more rods to be stored in a smaller space. Holds up to 6-8 Rods.

Stow N' Go 160 Gas Grill  Kuuma grills are designed for use on boats and built to withstand harsh marine environments, but are also perfect for RVing, tailgating and patio or deck grilling.  The Stow N' Go 160 is easy to transport and can be mounted to any Kuuma rail, rod or pedestal mount for use on your boat (sold separately).  It is compatible with 1 lb. throwaway propane cylinders.  This high quality lightweight 304 stainless-steel barbecue increases flavor while minimizing flare-ups.  It has a large cooking area of 160 square inches, and the stainless-steel burner heats up fast, is easy to clean, and resists rust.  The integrating folding legs are perfect for tabletop use and the grill is quick and easy to assemble.  Its compact design is great for storage after use.  Features: Ready to use, no assembly required  Equipped with thermometer and ignitor Folding legs  Mounting bracket  Removable grease tray for easy cleaning Technical Specifications: Material - 304 Stainless Steel Total Cooking Area - 160" Sq. In.  Number of Burners - 1 Burner BTU - 13,000 Dimensions (with regulator) (L x D x H) - 23.25" x 11.25" x 11"  Weight 16 lbs Fuel Type - Propane *Sold as an Individual WARNING: This product can expose you to chemicals including CARBON MONOXIDE which is known to the State of California to cause birth defects, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.