.75" Tall Stainless Stud w/#8 x 32 Thread Our Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide range of wire clamps and other small components to composite surfaces. The base plate is 0.62" in diameter with a .75" tall stud. Tensile strength is 300 lbs. and shear strength is 375 lbs. Maximum torque load is 45 inch/lbs.

1.25" Tall Stainless Stud w/#10 x 24 Thread Utilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. These studs can be bonded from either surface of the base plate.

1.5" Tall Stainless Stud w/#10 x 24 Thread Utilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. These studs can be bonded from either surface of the base plate.

2.25" Tall Stainless Stud w/#10 x 24 Thread Utilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. These studs can be bonded from either surface of the base plate.

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.250" Stud Required: ST125-1420-12SS Clamp Dimensions L/W/D: 0.87" x 0.47" x 0.41" Recommended Clamp Spacing: 3'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.375" Stud Required: ST125-1420-16SS Clamp Dimensions L/W/D: 1.06" x 0.63" x 0.56" Recommended Clamp Spacing: 3'

Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.375" Stud Required: ST125-1420-16SS Clamp Dimensions L/W/D: 1.54" x 0.63" x 0.56" Recommended Clamp Spacing: 3'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.625" Stud Required: ST125-1420-24SS Clamp Dimensions L/W/D: 1.39" x 0.79" x 0.89" Recommended Clamp Spacing: 4'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.75" Stud Required: ST125-1420-28SS Clamp Dimensions L/W/D: 1.65" x 0.79" x 1.18" Recommended Clamp Spacing: 4'

Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.25" Stud Required: ST125-1420-12SS Clamp Dimensions L/W/D: 1.22" x 0.47" x 0.41" Recommended Clamp Spacing: 3'

Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.625" Stud Required: ST125-1420-24SS Clamp Dimensions L/W/D: 1.39" x 0.79" x 0.89" Recommended Clamp Spacing: 4'

Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.75" Stud Required: ST125-1420-28SS Clamp Dimensions L/W/D: 1.65" x 0.79" x 1.18" Recommended Clamp Spacing: 4'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 1.0" Stud Required: ST125-1420-28SS Clamp Dimensions L/W/D: 1.65" x 0.79" x 1.18" Recommended Clamp Spacing: 5'

Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 1" Stud Required: ST125-1420-28SS Clamp Dimensions L/W/D: 1.65" x 0.79" x 1.18" Recommended Clamp Spacing: 5'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.5" Stud Required: ST125-1420-24SS Clamp Dimensions L/W/D: 1.39" x 0.79" x 0.89" Recommended Clamp Spacing: 4'